Overstock new merchandise remaining after release of DXE-RADP-3. Same as DXE-RADP-3 except intended for mounting to pipe up to 2" OD. 20 sets of 1/4-20 Stainless Steel Hardware included. Saddle clamp to mount the DX Engineering Radial Plate to a ground mounted pipe is sold separately. Accepts DXE-CAVS-11P, DXE-CAVS-2P or DXE-SSVC-2P saddle clamp.
- Made of 304 Stainless Steel
- Dimensions: 12 x 12 x .125 (1/8” thick)
- Accepts DXE-CAVS-11P, -CAVS-2P or -SSVC-2P saddle clamps
- Pre-Drilled for 60 1/4-20 stainless steel bolts
- 20 sets of 1/4-20 Stainless Steel Hardware Included
Note: An anti-seize compound such as Never-Seez, must be used with stainless steel hardware to prevent galling. While competitive radial plates claim to be better, they invariably fall short in important areas. A side-by-side comparison tells the story.
 The DX Engineering Radial Plate is larger, allowing it to be more universally usable - mount it to a pipe up to 2" OD, or a 4X4 or even a 6X6 treated wooden post. It is precision laser-cut from type 304 stainless steel, not aluminum which will dissolve in your soil The integral flange bracket has mounting holes to allow simple installation and - most importantly - a mounting hole for an SO-239 or bulkhead connector.
 Covered by a US Patent, this feature assures a direct connection from your coaxial cable shield to the radial system for the most efficient transfer of ground current - resulting in the highest performance. Never any loose hardware connections or dissimilar metal problems.
All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from date of shipment. DX Engineering's sole obligation under these warranties shall be to issue credit, repair, or replace any item or part thereof which is proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustments or repairs, or any other work, unless such charges are authorized in advance by DX Engineering.
If DX Engineering's products are claimed to be defective in material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in writing.
The above warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered defective by reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts thereof furnished by Buyer or acquired from others at Buyer's specifications. In addition, DX Engineering's warranties do not extend to other equipment and parts manufactured by others except to the extent of the original manufacturer's warranty to DX Engineering. The obligations under the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies including claims for special or consequential damages.
SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY IN ACCORDANCE WITH THE FOREGOING.
| Part # |
Part Name |
Ship By |
Price |
Add to Cart |
| DXE-RADP-1HWK |
Radial Plate Wire Attachment Hardware Kit - Stainless Steel
|
Ship Today |
$ 7.50 |
|
| DXE-RADW-1000K |
Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Ring Terminals, 200 Metal Staples
|
Ship Today |
$ 123.95 |
|
| DXE-RADW-500K |
Bulk Radial Wire Kit, 500 ft Spool of Wire, 20 Ring Terminals, 100 Metal Staples
|
Ship Today |
$ 61.90 |
|
| DXE-STPL-100P |
Radial Wire Metal Anchor Pins, 100/pack
|
Ship Today |
$ 16.00 |
|
| DXE-RADW-1K |
Radials Pre-Cut 10 15 and 20M includes 1/4" ring terminals
|
Ship Today |
$ 24.95 |
|
| DXE-RADW-40MK |
Radials Pre-Cut 40M includes 1/4" ring terminals
|
Ship Today |
$ 20.95 |
|
| DXE-RADW-80MK |
Radials Pre-Cut 80M includes 1/4" ring terminals
|
Ship Today |
$ 37.95 |
|
| DXE-900031 |
Automatic Wire Stripper/Crimper/Cutter, 24-10 Ga.
|
Ship Today |
$ 17.95 |
|
| DXE-8X19-RT |
Pigtail 19" for Hustler BTV Base to PL-259
|
Ship Today |
$ 16.95 |
|
| DXE-363-SST |
Bulkhead Fitting, SO-239 Socket, Silver Plating, Teflon Insulation
|
Ship Today |
$ 6.95 |
|
| DXE-112-KIT |
SO-239, Chassis Mount Socket, Silver Plating, Teflon Insulation
|
Ship Today |
$ 5.90 |
|
| DXE-83-798-KIT |
Amphenol SO-239, Chassis Mount Socket, Teflon Insulation
|
Ship Today |
$ 7.90 |
|
| DXE-83-1R-KIT |
Amphenol SO-239, Chassis Mount Socket, Glass Reinforced PBT Insulation
|
Ship Today |
$ 4.90 |
|
| DXE-CAVS-11P |
V-Saddle Clamp, 1/2 to 1-3/4 in. O.D. Applications, 5/16-18 thread
|
Ship Today |
$ 10.45 |
|
| DXE-CAVS-2P |
V-saddle clamp, 1 to 2 in. O.D. Applications
|
Ship Today |
$ 11.95 |
|
| DXE-SSVC-2P |
Stainless Steel V-Clamp for 1 to 2 inch steel pipe
|
Ship Today |
$ 11.95 |
|
| *DXE-NSBT8 |
Never-Seez, 8 oz. Brush Top
|
Ship Today |
$ 12.95 |
|
| * This product is limited to domestic UPS Ground shipping only |
| *DXE-81343 |
Anti-Seize, 1 oz. Squeeze Tube
|
Ship Today |
$ 2.99 |
|
| * This product is limited to domestic UPS Ground shipping only |
| *DXE-81464 |
Anti-Seize, 8.5 oz. Aerosol Can
|
Ship Today |
$ 10.99 |
|
| * This product is limited to domestic UPS Ground shipping only |
|
; "Radial Plate, Stainless Steel w/ 20 Sets of SS Radial Attachment Hardware")
