|
|
 |
 |
|
|
| Fast Taper High Performance 30 Meter Vertical Antenna - DXE-30VE-1 |
|
|
Description
|
Tech Info
|
Suggested Parts
|
Warranty
The DX Engineering fast taper 30VE-1 is a high-performance, self-supporting
vertical antenna system that operates over the entire 30 meter band*
with an SWR of less than 1.5:1, yet is only 24 feet high. The fast taper element provides the lowest wind
resistance. This vertical uses no coils or linear loading elements. Designed
with drawn 6063 corrosion-resistant aluminum tubing and stainless steel
hardware, this antenna is very durable and attractive. *Full 20 meter
band coverage is available by simply telescoping the tubing to 16
feet. Rugged aluminum alloy 6063 is most commonly used for seamless
structural tube and pipe. It is popular in structural use for both its high
strength and great, long lasting appearance. Alloy 6063 provides great
resistance to general corrosion, including resistance to stress-corrosion
cracking. With excellent surface appearance, 6063 is the best alloy for
high strength, long lasting antenna applications. The massive fiberglass
channel insulator supporting the 6063 drawn aluminum antenna radiator has
over twice the tensile and flexural strength of competitive nylon materials, and
is superior for its RF handling characteristics. With this antenna, you
get full-size 30 meter performance for maximum signal and DX performance.
It may also be telescoped to 16 feet for full-size 20 meter operation. Of
course, another key to performance in any 1/4 wave vertical is a good
ground radial system. For best performance on 30 meters, 32
radials, 20 feet long are recommended. Fewer radials will work,
but with diminishing results.
Features
- Full band coverage on 30 meters with SWR of under 1.5:1 - No Tuner
needed
- Tunable above and below 10 MHz range
- No Coils, or other loading schemes
- Power Handling up to 5 kW
- Full length quarterwave 24 ft overall height
The DX
Engineering 30VE-1 vertical antenna system includes:
Additional Material Needed but not Supplied
- Mounting pipe - Steel pipe, 1.75″ OD, 0.125″ min to 0.25″ wall thickness, 4
feet long
- Quik-set concrete for mounting pipe installation
- Radial wire and wire lugs - Use 14 gauge stranded copper wire with PVC
insulation. Minimum of 16 radials, 20 feet long. Bulk Radial Wire Kits using the highest quality
components are available for purchase.
- Penetrox
- To ensure good connection between aluminum hardware and in-between aluminum
tubing sections.
- Anti-seize compound - which should be used
on the threads of the Stainless Steel Hardware.
DX Engineering highly recommends the additional
purchase of a Vertical Feedline
Current Choke Kit, DX Engineering Radial
Plate and a Tilt
Base for use with the 30 meter Vertical Antenna. A DX
Engineering Vertical Feedline Current Choke
or line isolator is used to optimize the performance of many kinds of
antenna systems, including verticals. It prevents unwanted RFI by eliminating
feedline current and radiation. By eliminating stray currents from the feedline
all power goes to the antenna, and any noise or unwanted signals picked-up by
the feedline are eliminated, improving efficiency. Using a feedline choke can
also help overcome a less than optimal ground system. The DX Engineering Radial Plate is meant for those of
you who want an easy, neat and effective way to connect those essential radial
wires and the coax to the 30 meter vertical antenna for the lowest takeoff angle
and strongest signals. A DX Engineering Tilt Base means NO more
climbing ladders to tune your 1/4 wave vertical antenna! One person can easily
walk down the antenna to tune or make repairs. Simply lift the antenna, tilt to
the side and walk it down. After the antenna is up, you tighten the bolts to the
plate to keep it in place. Conveniently mounts to the same mast that you use for
the antenna and radial plate. Lightning
Protection Tech Articles Protect your installation and equipment!  DXE-30VE-1 HF Vertical Antenna Instructions (629K pdf)
The DX Engineering DXE-30VE-1 is a fast taper design for lowest wind resistance. The tubing sizes taper from a massive 2 in at the base to a sleek 1 in at the tip. Type 6063 corrosion-resistant aluminum tubing and stainless steel hardware are used throughout..
At an optimum 24 feet in length, this antenna provides full-band 30M coverage in an antenna that is one quarter wavelength high. It may also be telescoped to 16 feet for full-size 20 meter operation.
Of course, another key to performance is a good ground radial system. 32 radials, 20 feet long are recommended. Fewer radials will work, but with diminishing results.
The DXE-30VE-1 vertical antenna system includes the antenna elements, mounting plate, stainless steel hardware and clamps.
Features
- Full band coverage on 30 meters with an SWR under 1.5:1 - no tuner needed
- No Coils or Traps – Maximum Radiation Efficiency
- Power Handling up to 5 kW (see FCC rules for power limitations)
- Only 24 ft overall height
- Monoband 30 meter operation (or 20 meters at 16 ft height)
- Ideal for 4-Square or Dual Antenna Arrays
Check out this tech article: Get The Best Performance QW Vertical 2008
All products manufactured by DX Engineering are warranted to be free from
defects in material and workmanship for a period of one (1) year from date of
shipment. DX Engineering's sole obligation under these warranties shall be to
issue credit, repair, or replace any item or part thereof which is proved to be
other than as warranted; no allowance shall be made for any labor charges of
Buyer for replacement of parts, adjustments or repairs, or any other work,
unless such charges are authorized in advance by DX Engineering.
If DX
Engineering's products are claimed to be defective in material or workmanship,
DX Engineering shall, upon prompt notice thereof, issue shipping instructions
for return to DX Engineering (transportation-charges prepaid by Buyer). Every
such claim for breach of these warranties shall be deemed to be waived by Buyer
unless made in writing.
The above warranties shall not extend to any
products or parts thereof which have been subjected to any misuse or neglect,
damaged by accident, rendered defective by reason of improper installation,
damaged from severe weather including floods, or abnormal enviromental
conditions such as prolonged exposure to corrosives or power surges, or by the
performance of repairs or alterations outside of our plant, and shall not apply
to any goods or parts thereof furnished by Buyer or acquired from others at
Buyer's specifications. In addition, DX Engineering's warranties do not extend
to other equipment and parts manufactured by others except to the extent of the
original manufacturer's warranty to DX Engineering. The obligations under the
foregoing warranties are limited to the precise terms thereof. These warranties
provide exclusive remedies, expressly in lieu of all other remedies including
claims for special or consequential damages.
SELLER NEITHER MAKES NOR
ASSUMES ANY OTHER WARRANTY WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NO PERSON IS AUTHORIZED
TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY IN
ACCORDANCE WITH THE FOREGOING. All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from date of shipment. DX Engineering's sole obligation under these warranties shall be to issue credit, repair, or replace any item or part thereof which is proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustments or repairs, or any other work, unless such charges are authorized in advance by DX Engineering. If DX Engineering's products are claimed to be defective in material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in writing. The above warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered defective by reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts thereof furnished by Buyer or acquired from others at Buyer's specifications. In addition, DX Engineering's warranties do not extend to other equipment and parts manufactured by others except to the extent of the original manufacturer's warranty to DX Engineering. The obligations under the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies including claims for special or consequential damages. SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY IN ACCORDANCE WITH THE FOREGOING.
| Part # |
Part Name |
Ship By |
Price |
Add to Cart |
| DXE-VFCC-H05-A |
Vertical Feedline Current Choke 2/5 kW for Coaxially Fed 50 Ω HF Vertical Antennas
|
Ship Monday |
$ 134.95 |
|
| DXE-TB-3P |
Tilt Base for Hustler BTV Antennas
|
Ship Monday |
$ 62.50 |
|
| DXE-RADP-1P |
Radial Plate, Stainless Steel w/ 20 Sets of SS Radial Attachment Hardware
|
Ship Monday |
$ 54.50 |
|
| DXE-CAVS-2P |
V-saddle clamp, 1 to 2 in. O.D. Applications
|
Ship Monday |
$ 11.95 |
|
| DXE-RADP-1HWK |
Radial Plate Wire Attachment Hardware Kit - Stainless Steel
|
Ship Monday |
$ 7.50 |
|
| DXE-RADW-1000K |
Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Ring Terminals, 200 Metal Staples
|
Ship Monday |
$ 123.95 |
|
| DXE-STPL-100P |
Radial Wire Metal Anchor Pins, 100/pack
|
Ship Monday |
$ 16.00 |
|
| DXE-STPL-300P |
Radial Wire Metal Anchor Pins, 300/pack
|
Ship Monday |
$ 44.00 |
|
| DXE-900031 |
Automatic Wire Stripper/Crimper/Cutter, 24-10 Ga.
|
Ship Monday |
$ 17.95 |
|
| *DXE-P8A |
Penetrox A Anti-Oxidant - 8 oz Squeeze Bottle
|
Ship Monday |
$ 13.95 |
|
| * This product is limited to domestic UPS Ground shipping only |
| *DXE-NSBT8 |
Never-Seez, 8 oz. Brush Top
|
Ship Monday |
$ 12.95 |
|
| * This product is limited to domestic UPS Ground shipping only |
| *DXE-81343 |
Anti-Seize, 1 oz. Squeeze Tube
|
Ship Monday |
$ 2.99 |
|
| * This product is limited to domestic UPS Ground shipping only |
| *DXE-81464 |
Anti-Seize, 8.5 oz. Aerosol Can
|
Ship Monday |
$ 8.99 |
|
| * This product is limited to domestic UPS Ground shipping only |
|
|
Top of page
|
|
; "Fast Taper High Performance 30 Meter Vertical Antenna")
