LIMITED TIME SALE PRICE!

Why pay more and get less?  Don't believe hearsay!  Click here to compare!

Click for some STRAIGHT TALK about what makes an antenna "BETTER"!

This is a 43 foot, high performance 160 thru 10 meter vertical multi-band antenna - not a relic of old design and materials technology.  The old Model "T" is not the best car in the world any more!

Now - work DX as you never could before with a low horizontal antenna!

 

·         Requires a special DX Engineering 4:1 DXE-UN-43 UNUN with coax feed and your in-shack wide-range tuner - or a DXE-MBV-ATU-1 automatic tuner at the base of the antenna.

·         Massive EXTREN®  channel insulator - over twice the tensile and flexural strength of competitive nylon plastic materials, and is superior for its RF handling characteristics. Never use nylon insulators around RF!

·         Rugged structural grade type 6063-T832 drawn aluminum radiator - the best alloy for high strength, long lasting antenna applications.

·         The fast taper antenna element provides the lowest wind resistance.

·         All Stainless Steel hardware -  very durable and attractive

·         Free-standing to 92 mph wind speeds.

·         Requires a good ground radial system. 32 radials, 65 feet long are recommended. Fewer radials will work, but with diminished results.

 

Includes the antenna element, mounting plates, Tilt Base, stainless steel hardware and clamps.  The rugged Stainless Steel tilt base has a true EXTREN® channel insulator - not a cheap plastic one!

See the cost effective packages now available for your application. 

 

DXE-MBVE-1-4P  Antenna Package with Radial Plate

DXE-MBVE-1-4UP  Antenna Package with UN-43 UNUN

DXE-MBVE-1-4UPR Antenna Package with Radial Plate and UNUN

DXE-MBVE-1-3ATP Antenna Package with MBV-ATU-1 Aremote Automatic Tuner

Lightning Protection Tech Articles Protect your installation and equipment!

DXE-MBVE-1 HF Vertical Antenna Instructions (1.38M pdf)

No on-the-air shills - just reviews by real people like you!

DX Engineering 43 foot Vertical Installation at KB8UUZ

The DXE-MBVE-1 features a laser-cut stainless steel tilt base assembly, not aluminum and painted steel used by others.

Features

• Full band coverage from 160 meters through 10 meters with your wide range outboard antenna tuner 
• No Coils or Traps – Maximum Radiation Efficiency
• Power Handling up to 5 kW 
• A true 43+ ft overall height of radiating element 

The use of a customer supplied, high quality, outboard tuner is required for any multi-band trapless vertical antenna system.  The tuner should be capable of tuning the wide range of impedances presented by the antenna and coaxial cable at all the operating frequencies.  There are a number of outboard automatic antenna tuners available that are capable of tuning this type of high performance vertical antenna system.  If this type of tuner is mounted at the base of the antenna, it may be directly connected to the vertical radiator and ground radial system without a balun.  In this case, a DXE-FCC050-H05-A Feedline Current Choke may be used in the coaxial line to reduce feedline radiation and resultant noise pickup by the feedline.  Our testing of the 43-foot antennas with 150 feet of quality Belden RG-213/U coaxial cable and the MFJ-993B automatic antenna tuner has yielded excellent results at the 100 watt power level.

**160 Meter Notes**

 

A 200 watt plug and play package including an antenna-mounted automatic tuner is now available by ordering DXE-MBVE-1-3ATP.

When the tuner is located in your shack and coaxial cable is used to feed the antenna, an optional UNUN - the DXE-UN-43 and DXE-UN-BRKT mounting kit - is required to force equal current to both the vertical radiator and the radial ground system, and allow your tuner to properly adjust the impedance.  Tuners of this type generally have a good quality variable roller inductor and at least one large variable capacitor for fine tuning.

  

Tuners which are built into transceivers lack sufficient impedance tuning range for this type of high performance vertical antenna system.

 

The actual impedance of the multiband antenna is affected by local conditions, including proximity to structures, other antennas, the number of radials, or personal preference for mounting location.  It may be necessary to adjust the top element section slightly longer or shorter, or vary the length of the coaxial cable, if tuning to best SWR is not achieved with your tuner on all bands.

 

The performance of this versatile, rugged antenna is highly dependent on the ability of your tuner to deliver a low SWR when tuned. Refer to your tuner user's manual for correct tuner operation. 

Check out this tech article: Get The Best Performance QW Vertical 2008

The 43 foot tall vertical is, in essence, a "long wire" being operated against a very good ground radial system. Yes, there are coax losses due to high SWR. That is the compromise that one accepts when gaining the ability to operate over many bands in a very small area. This is a viable option for many hams who have enough yard area for a modest radial field, but who do not have the space or supports available for a traditional dipole for 160 or 80 meters. So, even at reduced efficiency with some loss, with the resulting low angle radiation pattern from the vertical, as compared to a low, back yard dipole at 35 feet, you can have an opportunity to work DX and be functional on all bands. Many hams have these conditions and can take advantage of this approach, as long as they own or obtain a very good tuner with sufficient impedance and power handling range. The benefits of a physically large vertical on the higher bands come in pattern and improved reception.

Below is the elevation view of the antenna patterns exhibited by a 43 foot vertical as well as a full sized dipole for 3.5 MHz at a height of 35 feet. Most of the dipole’s energy is going straight up - only to be reflected back to local, close-in stations. This is great for evening rag-chewing but very poor for DX.
Looking at the low angle vertical antenna pattern, it is easy to see that an additional advantage of the use of a vertical, when antennas specific to receiving are not available, is that the high angle response -- which would be responsible for the reception of local QRM and QRN -- would be reduced immensely when working low-angle DX Signals. Hence, a quieter receive situation.

As for the very low feedpoint impedances on lower frequency operation, these values are sufficiently rotated by the use of 100 to 200 feet of coaxial cable, to allow a capable tuner to achieve a flat match on all bands. The test system we used for the 43 foot vertical over 32 radials each 65 foot long with the 4:1 balun and 150 feet of RG-213 coax to the tuner. For low power operations, the automatic MFJ model 993B was able to achieve a flat match on all bands.

The DX Engineering Current Choke Balun will force the current equal on the antenna and radial system, making the electrically short system do the best it can with the available power.

If one were able to use ladder line from the antenna to the balun back at the house, then a 1:1 balun would be recommended, with a short run of coax inside to the wide range tuner. Ultimately, this antenna system would be most efficient with the automatic tuner located at the base of the vertical.

The convenience of a Multi-Band Vertical is not intended and can never be a high efficiency antenna system on every band. It is, however, intended to offer a alternative to many hams who might otherwise not be able to operate on all bands. The reports from many customer who are using this system, is that the lack of efficiency on the lowest bands is acceptable when balanced against the excellent result achieved on most of the remaining bands. After all, many types of compromise antennas have be yielding amazing results for decades of ham radio operation, because RF will get there and contacts will be made!

All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from date of shipment. DX Engineering's sole obligation under these warranties shall be to issue credit, repair, or replace any item or part thereof which is proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustments or repairs, or any other work, unless such charges are authorized in advance by DX Engineering.

If DX Engineering's products are claimed to be defective in material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in writing.

The above warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered defective by reason of improper installation, damaged from severe weather including floods, or abnormal enviromental conditions such as prolonged exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts thereof furnished by Buyer or acquired from others at Buyer's specifications. In addition, DX Engineering's warranties do not extend to other equipment and parts manufactured by others except to the extent of the original manufacturer's warranty to DX Engineering. The obligations under the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies including claims for special or consequential damages.

SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY IN ACCORDANCE WITH THE FOREGOING.

All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from date of shipment. DX Engineering's sole obligation under these warranties shall be to issue credit, repair, or replace any item or part thereof which is proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustments or repairs, or any other work, unless such charges are authorized in advance by DX Engineering.

If DX Engineering's products are claimed to be defective in material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in writing.

The above warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered defective by reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts thereof furnished by Buyer or acquired from others at Buyer's specifications. In addition, DX Engineering's warranties do not extend to other equipment and parts manufactured by others except to the extent of the original manufacturer's warranty to DX Engineering. The obligations under the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies including claims for special or consequential damages.

SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY IN ACCORDANCE WITH THE FOREGOING.

Part #	Part Name	Ship By	Price	Add to Cart
DXE-RADW-32RT	Radials Pre-Assembled 32 ft 1/4" ring terminals 20 Pack	Ship Today	$ 104.95
DXE-GUY400-KIT	Guying Kit for DX Engineering & other Verticals exceeding 30 ft.	Ship Today	$ 54.95
MFJ-993B	MFJ Dual 300 / 150 Watt IntelliTuner Automatic Antenna Tuner	Ship Today	$ 239.00
DXE-UN-43	UNUN - 4:1 High Power for use with Non-Resonant Verticals	Ship Today	$ 104.95
DXE-UN-43-R	UNUN Complete Kit for 43 ft Vertical Antennas	Ship Today	$ 129.95
*DXE-P8A	Penetrox A Anti-Oxidant - 8 oz Squeeze Bottle	Ship Today	$ 13.95
* This product is limited to domestic UPS Ground shipping only
*DXE-NSBT8	Never-Seez, 8 oz. Brush Top	Ship Today	$ 12.95
* This product is limited to domestic UPS Ground shipping only
*DXE-81343	Anti-Seize, 1 oz. Squeeze Tube	Ship Today	$ 2.99
* This product is limited to domestic UPS Ground shipping only
*DXE-81464	Anti-Seize, 8.5 oz. Aerosol Can	Ship Today	$ 10.99
* This product is limited to domestic UPS Ground shipping only
DXE-UN-BRKT	UNUN Mounting Kit Only for Multi-Band HF Verticals	Ship Today	$ 22.95
DXE-RADP-3	Radial Plate, Stainless Steel w/20 sets Radial Attach Hardware, up to 3" OD pipe * Replaces DXE-RADP-1P	Ship Today	$ 54.50
DXE-SSVC-2P	Stainless Steel V-Clamp for 1 to 2 inch steel pipe	Ship Today	$ 11.95
DXE-RADP-1HWK	Radial Plate Wire Attachment Hardware Kit - Stainless Steel	Ship Today	$ 7.50
DXE-RADW-1000K	Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Ring Terminals, 200 Metal Staples	Ship Today	$ 123.95
DXE-STPL-100P	Radial Wire Metal Anchor Pins, 100/pack	Ship Today	$ 16.00
DXE-STPL-300P	Radial Wire Metal Anchor Pins, 300/pack	Ship Today	$ 44.00

Read N5RMM's Testimonial
Write/Read Reviews for the MBVE-1 43 ft. Multiband Vertical Antenna at E-Ham