The Hy-Gain T-2X Tailtwister Series II is designed for medium communications antenna arrays of up to 20 square feet wind load area.

Low temperature grease, alloy ring gear indicator potentiometer, ferrite beads on potentiometer wires, new weatherproof AMP connectors plus 8-pin plug at control box, triple bearing race with 138 ball bearings for large load bearing strength, electric locking steel wedge brake, north or south center of rotation scale on meter, low voltage control, max mast of 2-1/16 in. OD.

Don't forget to order DX Engineering high quality rotor cable - regular DXE-CW8 or heavy duty DXE-CW8-HD for long runs.

T-2X Antenna Rotator Instructions (408K pdf)

T-2X Rotator Specifications

Wind Load Capacity (inside tower): 20 square feet
Wind Load (w/ Mast Adapter): 10 square feet
Turning Power: 1000 pounds
Brake Power: 9000 pounds
Brake Construction: Electric Wedge
Bearing Assembly: Dual race/138 ball bearings
Mounting Hardware: Clamp Plates/Steel U-Bolts
Control Cable Conductors: 8
Shipping Weight: 28 pounds
Effective Moment (in tower): 3400 ft/lbs.

LIMITED WARRANTY

Hy-Gain warrants to the original owner of this product, if manufactured by Hy-Gain and purchased from an authorized dealer or directly from Hy-Gain to be free from defects in material and workmanship for a period of 12 months for rotator products and 24 months for antenna products from date of purchase provided the following terms of this warranty are satisfied

1. The purchaser must retain the dated proof-of-purchase (bill of sale, canceled check, credit card or money order receipt, etc.) describing the product to establish the validity of the warranty claim and submit the original or machine reproduction of such proof of-purchase to Hy-Gain at the time of warranty service. Hy-Gain shallhave the discretion to deny warranty without dated proof-of-purchase. Any evidence of alteration, erasure, or forgery shall be cause to void any and all warranty terms immediately

2. Hy-Gain agrees to repair or replace at Hy-Gain’s option without charge to the original owner any defective product under warranty, provided the product is returned postage prepaid to Hy-Gain with a personal check, cashiers check, or money order for $8.00 covering postage and handling

3. Under no circumstances is Hy-Gain liable for consequential damages to person or property by the use of any Hy-Gain products

4. Out-of-warranty Service: Hy-Gain will repair any out-of-warranty product provided the unit is shipped prepaid. All repaired units will be shipped COD to the owner. Repair charges will be added to the COD fee unless other arrangements are made

5. This warranty is given in lieu of any other warranty expressed or implied.
 
6. Hy-Gain reserves the right to make changes or improvements in design ormanufacture without incurring any obligation to install such changes upon any of the products previously manufactured.
 
7. All Hy-Gain products to be serviced in-warranty or out-of-warranty should be addressed to:

Hy-Gain
308 Industrial Park Road
Starkville,
Mississippi 39759

and must be accompanied by a letter describing the problem in detail along with a copy of your dated proof-of-purchase.

8. This warranty gives you specific rights, and you may also have other rights which vary from state to state.

Part #	Part Name	Ship By	Price	Add to Cart
DXE-CW8	Control Wire, 8 Conductor, per foot	Ship Today	$ 0.48
DXE-CW8-HD	Control Wire, 8 Conductor, Heavy Duty, per foot	Ship Today	$ 0.98
DXE-UBK-HYG-2	Replacement U-Bolt kit for Hy-Gain T2X Rotor	Ship Today	$ 5.50