|
|
 |
 |
|
|
| Hustler Multi-Band HF Verticals (BTV's) |
| Previous Page |
 |
|
Don't forget to order a tilt base , radial plate and NEW SO-239 connector add-on kit now.
The Hustler BTV series of multi-band, trapped vertical antennas offer excellent performance at a very affordable price. They are easy to assemble and tune. Be on the air in a matter of hours! All Hustler BTV verticals easily handle full legal limit power with a low SWR. They are constructed from large diameter (1.25") tubing from bottom to top. An exclusive trap coil design wraps around 1 inch diameter, solid fiberglass cores, offering the lowest possble loss and consistent operation on each band.
Three Models are available:
- 4-BTV - Covers 10, 15, 20 and 40m
- 5-BTV - Covers 10, 15, 20, 40 and 75 or 80m
- 6-BTV - Covers 10, 15, 20, 30, 40 and 75 or 80m.
NEW! DX Engineering 17M add-on kit and 60M add-on kit for BTV's
Many DX Engineering accessories for the Hustler BTV antennas are available for a complete, high performing installation - see a complete description in New Assembly and High Performance Installation Instructions (3.3M pdf). This will answer all your questions:
- Ground, roof or elevated mount?
- Radials or no radials?
- What accessories do I need?
- How about WARC band operation?
- ...and much more!
The DX Engineering Tilt-Base provides an easy way to lay the vertical down for tuning, weather events or fussy neighbors! This is one accessory you won't regret buying. Made of 1/4 inch thick Stainless Steel, this tilt-base will last a long time. No vertical antenna should be without a DX Engineering Tilt Base!
These Hustler verticals, like any 1/4 wavelength vertical, depend on a good radial system for peak performance. For an easy, neat and effective way to connect those essential radial wires to your vertical, use a DX Engineering Stainless Steel Radial Plate.
Live in an antenna unfriendly neighborhood? All BTV models may disguised as a flag pole in deed restricted areas. BTV Disguised Flagpole article (720k pdf).
If you wish to reduce feedline radiation and further improve the performance of your Hustler BTV or any vertical antenna, a DX Engineering Vertical Feedline Current Choke Kit is recommended.
Live in an area that experiences high gusts of wind? Check out our BTV Guying Kits. It never hurts to guy a vertical.
See what others have done with their Hustler BTV verticals:Customer BTV Installation Web Articles and Image Galleries
|
| Part # |
Part Name |
Price |
Add to Cart |
| DXE-BTV-INSTALL-GUIDE |
New BTV Assembly and High Performance Installation Instructions
|
$ 5.00 |
|
| HUS-4BTV |
Hustler 4BTV Antenna, 40/20/15/10M, w/ DXE High Performance Guide
|
$ 124.95 |
|
| DXE-HUS-4BTV-P |
Hustler 4BTV Package - High Performance HF Vertical System
|
$ 379.00 |
|
| HUS-5BTV |
Hustler 5 BTV Antenna, 80-75/40/20/15/10M, w/ DXE High Performance Guide
|
$ 159.95 |
|
| DXE-HUS-5BTV-P |
Hustler 5BTV Package - High Performance HF Vertical System
|
$ 419.00 |
|
| HUS-6BTV |
Hustler 6 BTV Antenna, 80-75/40/30/20/15/10m, w/ DXE High Performance Guide
|
$ 189.95 |
|
| DXE-HUS-6BTV-P |
Hustler 6BTV Package - High Performance HF Vertical System
|
$ 454.00 |
|
| DXE-AOK-12M |
Add-On-Kit 12M for the Hustler BTV Series Verticals
|
$ 59.95 |
|
| DXE-AOK-17M |
Add-On-Kit 17M for the Hustler BTV Series Verticals
|
$ 69.95 |
|
| HUS-30-MTK |
30M Add-On Kit for the Hustler BTV Series Verticals
|
$ 46.95 |
|
| DXE-AOK-60M |
Add-On-Kit 60M for the Hustler BTV Series Verticals
|
$ 74.95 |
|
| DXE-AOK-80M |
Add-On-Kit 80M for the Hustler 4-BTV Verticals
|
$ 59.95 |
|
| DXE-AOK-DCF |
Add-On-Kit Direct Coax Feed for Hustler BTV Verticals
|
$ 22.95 |
|
| DXE-VMN-1 |
Vertical Antenna Matching Network
|
$ 44.95 |
|
Warranty Information
New-Tronics Antenna Corporation Limited Warranty
New-Tronics Antenna Corporation warrants it's products to be free of defects in the material and workmanship and extends this warranty under intended use and normal service conditions to the original owner for a period of one year from the date of purchase. This warranty does not apply to any product that has been repaired or altered in any manner and it void for any damage due to accident, neglect, unreasonable use, improper installation of any other cause not arising out of defects in material of workmanship. The obligations of New-Tronics Antenna Corporation are limited to repairing or replacing, at it's option, any product or part that is returned to the factory all transportation charges prepaid, accompanied by proof of purchase and which examination reveals to have been defective within the warranty period stated above. New-Tronics Antenna Corporation does not assume nor is any person authorized to assume for it, any obligations other than that herein stated. Any implied warranties, including but not limited to fitness for a particular purpose, are limited in duration for the above one year period. New-Tronics Antenna Corporation shall not be liable under this warranty, or any implied warranty, for the loss of use of the product or for other consequential loss or damage incurred by the purchaser. Some states do not allow the exclusion of limitation of implied warranties of consequential damages and so the above exclusions of limitations may not apply. This warranty gives you the special legal rights and you may have other rights that vary from state to state. Top of page
|
|
 |
 |
 |
 |
|
 |
 |
|
 |
. Hal Lloyd
W4OE
The Villages, Florida
USA
|
 |
| Get more information about this antenna >> |
 |
Be an Antenna Superstar!
You put a lot of time and effort into designing and building your DX Engineering-equipped antenna. So why not show the world what you have created by submitting it to the DX Engineering Antenna Showcase? It’s easy to do, too. Just click on the Entry icon above, fill out the information form--don't forget to include information about the DX Engineering products used on your antenna, attach some photos, and presto!--you’re an antenna superstar!
|
|
|
;)
