|
 |
DX Engineering Catalog |
 |
What's New? |
 |
Stealth Antenna Systems |
 |
Aluminum Tubing |
 |
Amplifiers, Tuners, Microphones, Station Accessories |
 |
Antenna Switches |
 |
Antenna Tools |
 |
Baluns, UNUNs & Feedline Current Chokes |
 |
Coax, Cable, Assemblies, Connectors, Ladder Line |
 |
50 Ohm Coax, Cable Assemblies, Connectors & Prep Tool |
 |
|
 |
Bulk Coaxial Cable |
 |
RG-8/U Foam Coax Assemblies |
 |
RG-213/U Coax Assemblies |
 |
RG-8/X Coax Assemblies |
 |
50 Ohm Chassis Mount SO-239's and Bulkhead |
 |
PL-259 Silver/Teflon Coax Connectors |
 |
Type N Silver/Teflon Coax Connectors |
 |
Coaxial Connector Adapters |
 |
50 Ohm Coax Cable Prep Tools |
 |
Cushioned Cable Clamps |
 |
75 Ohm Coax, Connectors & Prep Tools |
 |
300 & 450 Ohm Ladder Line & Couplers |
 |
Low Loss HF Long Runs |
 |
Multiconductor Control Wire |
 |
HEXX Antenna Kits & Components |
 |
Lightning Protectors Grounding Systems |
 |
Mobile Antennas Accessories & Parts |
 |
Receiving Antennas Systems & Components |
 |
Saddle Clamps & Mounting Hardware |
 |
Wire Antennas & Components |
 |
Vertical Antennas & Systems |
 |
Vertical Antenna Parts |
 |
Yagi & Directional Antennas |
 |
Yagi Antenna Parts |
 |
ARRL PUBLICATIONS |
 |
COMTEK SYSTEMS |
 |
DIAMOND ANTENNAS |
 |
HUSTLER ANTENNAS |
 |
ICOM |
 |
MFJ PRODUCTS |
 |
DX Engineering Apparel |
 |
Gift Certificates |
 |
Clearance Department Up to 50% off! |
|
|
| Employment Opportunities |
| Prize Contribution Rules |
| Links |
| Tech Info |
| Contact Us |
| Gift Certificate Status |
| Site Map |
 |
|
 |
 |
|
|
| 50 Ohm Coax Cable Prep Tools |
 |
 |
The UT-8213 simplifies the preparation of RG-8 or RG-213 coax to accept PL-259 UHF style or 2-piece Type N connectors. The UT-808X is specifically designed for stripping RG-8X/Belden 9258 cable. The CNL-911 cutters have specially designed blades to cut the cable without crushing it - leaving the end cleanly cut and ready for stripping and connector assembly. The UT-80P or UT-80N allow mechanical assembly of the PL-259 or 2-piece Type N connector body to the cable without shredding it with pliers.
All DX Engineering Cable ...More Details >>
|
| Part # |
Part Name |
Ship By |
Price |
Add to Cart |
|
DXE-UT-CASE |
Molded Case for UT Coaxial Cable Prep Tools
|
Ship Tuesday |
$ 22.95 |
|
|
DXE-UT-KIT1 |
Basic Coax Cable Prep Tool Kit
|
Ship Tuesday |
$ 99.95 |
|
|
DXE-UT-KIT2 |
Complete Coax Cable Prep Tool Kit
|
Ship Tuesday |
$ 174.95 |
|
|
DXE-SW-CASE |
Molded Utility Case with Convoluted Foam
|
Ship Tuesday |
$ 19.95 |
|
|
DXE-UT-8213 |
Coax Cable Stripper for RG-213, RG-8, 9913F7, LMR-400 etc.
|
Ship Tuesday |
$ 39.95 |
|
|
DXE-UT-808X |
Coax Cable Stripper for RG-8X, Belden 9258, LMR-240
|
Ship Tuesday |
$ 39.95 |
|
|
DXE-UT-RB-HD |
Premium Replacement Blades for DX Engineering and Cablematic Strippers
|
Ship Tuesday |
$ 18.95 |
|
|
DXE-UT-80P |
Connector Assembly Tool for PL-259/RG-213-size Cable
|
Ship Tuesday |
$ 22.95 |
|
|
DXE-UT-80N |
Connector Assembly Tool for Type N/RG-213-size Cable
|
Ship Tuesday |
$ 22.95 |
|
|
DXE-CNL-911 |
Coax Cable Cutter
|
Ship Tuesday |
$ 23.75 |
|
|
DXE-T001 |
Tool Kit for SO-239/Bulkhead Connector Installation
|
Ship Tuesday |
$ 9.95 |
|
| *
PLD-LET14Z03 |
Black Liquid Tape, Brush Top Can, 4 Fluid oz.
|
Ship Tuesday |
$ 6.99 |
|
|
* This product is limited to domestic UPS Ground shipping only
|
|
DXE-3M2155 |
3M Temflex 2155 Rubber Splicing Tape
|
Ship Tuesday |
$ 5.95 |
|
|
DXE-33PLUS |
Scotch Super 33+ Vinyl Electrical Tape
|
Ship Tuesday |
$ 5.95 |
|
|
DXE-170M |
Precision Shear Side Cutters
|
Ship Tuesday |
$ 7.95 |
|
Warranty Information
All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from date of shipment. DX Engineering's sole obligation under these warranties shall be to issue credit, repair, or replace any item or part thereof which is proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustments or repairs, or any other work, unless such charges are authorized in advance by DX Engineering.
If DX Engineering's products are claimed to be defective in material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in writing.
The above warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered defective by reason of improper installation, damaged from severe weather including floods, or abnormal enviromental conditions such as prolonged exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts thereof furnished by Buyer or acquired from others at Buyer's specifications. In addition, DX Engineering's warranties do not extend to other equipment and parts manufactured by others except to the extent of the original manufacturer's warranty to DX Engineering. The obligations under the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies including claims for special or consequential damages.
SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY IN ACCORDANCE WITH THE FOREGOING.
Top of page
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
. Rick Elushik
N8GGO
Zeeland, MI
USA
|
 |
| Get more information about this antenna >> |
 |
Be an Antenna Superstar!
You put a lot of time and effort into designing and building your DX Engineering-equipped antenna. So why not show the world what you have created by submitting it to the DX Engineering Antenna Showcase? It’s easy to do, too. Just click on the Entry icon above, fill out the information form--don't forget to include information about the DX Engineering products used on your antenna, attach some photos, and presto!--you’re an antenna superstar!
|
|
|