Fast Taper Models Can Be
Shipped Worldwide Via
Low Cost U.S. Postal Service!

Fast Taper - 2 1/8" to 3/8"
160 to 10m Multiband Vertical - 43 ft.
DXE-MBVE-1 ........................................$299.50

Fast Taper - 2" to 1/2"
80m and up Multiband Vertical - 33 ft.
DXE-MBVE-2 ........................................$279.50

THUNDERBOLT™ - 2 1/8" to 1 1/2"
60 Vertical Antenna - 43 ft.
DXE-60VA-1P .....................................$349.50

Verticals on Sale!
Best Antenna
Value Anywhere!

Easiest assembly and tuning of any multi-band vertical!

$18.99

Active Receive Antenna
w/ Internal Antenna
Disconnect Relay

• NEW W8JI relay design
• Operates from
  100 kHz to 30 MHz
• Able to be used in close proximity to transmit antennas

DXE-ARAV2-1P Active Vertical Receive Antenna w/ Relay................................$259.00
DXE-ARAV2-4P Active Vertical Receive Antenna w/ Relay, pack of 4..............$849.95
DXE-ARAH2-1P Active Horizontal Receive Antenna w/ Relay.................................$289.00

Reversible Beverage System
RBS-1P

• Two Beverage antennas in the same space, receive in opposing directions
• Both antennas can share a common feedline to one receiver or use two feedlines to different receivers

Receiver Preamplifier
System RPA-1

• W8JI design
• 16 dB gain from 0.3 to 35 MHz

Protection for Receive Devices

Time Variable Sequencer Unit

• Micro-based transmit/receive control signal delay sequencer
• Provides 0-30 ms of delay
• CW side tone generator
• Supports full-break-in

DXE-TVSU-1........................................$159.95

Utility Enclosure Package

• Ideal for mounting lightning suppressors & other equipment
• Weather-tight
• Aluminum Mounting Plate & Four weather-tight coax feed through couplers included

RG-213/U & RG-8/X Coax Cable Assemblies

• Quality Belden coaxial cable
  
• Silver/Teflon connectors
  
• Connectors are soldered rather than crimped
  
• 100% Hi-Pot tested
• Call for custom requirements

17m Add-On Kit

• Full band under 1.5:1 SWR
• Retains all other bands at full ratings
• Simple installation
• 500W SSB/CW power rating

DXE-AOK-17M
17m add-on kit for BTV..........................$49.95

60m Add-On Kit

• 60m coverage for Hustler BTV series antennas
• Operates across the complete 60m band
• SWR of 1.5:1 or less
• Includes new capacitive compensator
• Retains all bands at peak performance

DXE-AOK-60M
60m add-on kit for Hustler BTV............$69.95

EZ-Build^TM High Performance Antenna Components

• Multi-purpose center-T and end insulators to create many types of wire antennas
• Create single band, multi-band, multi-frequency and folded dipole antennas
• Easy solder-free construction
• Works with DX Engineering's 300 Ω ladder line for both the feed and elements
• Use with Doublet, Inverted-V, Off-center Fed, Zepp, Long Wire, Rhombic, V-Beam, and Loop Antenna configurations
• Kits available for coax or ladder line feed
• Center-T attaches to all DX Engineering baluns, including the new lightweight balun

DXE-UWA-KIT
Universal Wire Antenna Hardware Kit, no Coax Adapter............................................$17.95

DXE-UWA8X-KIT
Universal Wire Antenna Hardware Kit, with coax attachment and strain relief for use with RG-8X........................................................$29.95

DXE-UWA213-KIT
Universal Wire Antenna Hardware Kit, with coax attachment and strain relief for use with RG-213......................................................$32.95

RTTY — PSK-31
Enjoy the Fun of
Digital Communications!
SSTV + More


SignaLink^™ From Tigertronics

TIG-SL-USB ......................................$86.95
Then choose a cable for each radio!
Any Radio Interface Cable only $12.95
when purchased with SignaLink^™ unit.
YOUR TOTAL $99.90

For your complete digital solution!

• Easiest installation and setup--Macintosh and PC
• Just plug in two cables
• Software CD ROM included
• Comprehensive & easy to follow instructions
• Built-in low noise sound card
• USB port powered
• Works with ALL radios
• Uses Mic, Data, or Accy port
• Supports all sound card digital and voice modes
• Requires radio interface cable, sold separately below

Radio Interface Cables
TIG-SL-CAB4R 4-pin round mic connection................................................$14.95
TIG-SL-CAB8R 8-pin round mic connector..................................................$14.95
TIG-SL-CABRJ1 RJ-11 mic
connector..................................................$14.95
TIG-SL-CABRJ4 RJ-45 mic
connector..................................................$14.95
TIG-SL-CAB5PD 5-pin DIN...................$14.95
TIG-SL-CAB8PD 8-pin DIN...................$14.95
TIG-SL-CAB13I 13-pin DIN Icom........$19.95
TIG-SL-CAB13K 13-pin DIN Kenwood..................................................$19.95
TIG-SL-CAB6PM 6-pin mini-DIN.........$14.95
TIG-SL-CABNC Unterminated Cable...$7.95

DXE Aluminum Tubing

• High strength Type 6063-T832 drawn aluminum tubing
• Sections with 0.058" wall thickness are perfect for telescoping antenna elements
• Most sizes are pre-slit on one end for element clamps
• Available in 3 and 6 foot lengths

New DX Engineering Verticals
Why Pay More?

THUNDERBOLT^™ - 2 1/8" to 1 1/2"
160 to 10m Multiband Vertical - 43 ft.
DXE-MBVA-1P .....................................$449.50

THUNDERBOLT^™ - 2 1/8" to 1 1/2"
75/80m Vertical Antenna - 43 ft.
DXE-80VA-3 .........................................$499.50

High Performance 40m Vertical
With Top Hat - 24 ft.
DXE-40VA-1 .........................................$249.50

Fast Taper - 2" to 1/2"
High Performance 40m Vertical - 36 ft.
DXE-40VE-1 .........................................$259.50

Fast Taper - 2" to 1"
High Performance 30m Vertical - 24 ft.
DXE-30VE-1 .........................................$229.50

Fast Taper - 2 1/8" to 3/8"
60m Vertical Antenna - 43 ft.
DXE-60VE-1P ........................................$349.50

Accessories
DXE-RADP-1P Radial Plate w/ 20 Stainless bolt sets.....................................................$49.95
DXE-363-SST Bulkhead Grounded Cable Connector...................................................$6.95
DXE-BAL200-H10-AT 5kW/10kW SSB Balun.......................................................$119.95
DXE-VFCC-BRKT Insulated Balun Mount.........................................................$14.95
DXE-CAVS-2P V-Saddle Clamp for
DXE-VFCC-BRKT...................................$10.95
DXE-GUY400-KIT Guy Kit.....................$49.95

Remote Antenna
Switches

• Best SWR and
  port isolation on the market!
• Stops noise injection from unselected anennas
• 8-position switch, controller included

5 kW Key-Down RF Switch
Better than 70 dB of port-to-port isolation
RR8-HP-P.............................................$375.00

10 kW Key-Down
RF Switch
Better than 60 dB of port-to-port isolation
RR8-SD-P.............................................$495.00

Receive Four Square With Controller

• Can be used in close proximity to TX antenna
• 4 directions selectable
• Superior F/B
• Made to be used with DX Engineering
  102 in. Active Receive Antenna for full size performance - DXE-ARAV2-4P

DXE-RFS-2P
Receive Four Square with Controller...............................................$359.95

Complete Receive 4-Square Systems are now available

DX Engineering Current Baluns and Feedline Current Chokes

• 5, 10 and 10 kW+ Baluns & Current Chokes
• High efficiency, low loss - W8JI design
• All ratios available

Coax Current Chokes

• Reduce RFI and pattern distortion

Starting at just $69.95 for FCC050-H05-A

We're Clamp Central!

High Strength Stainless, Aluminum & Polymer Saddle Clamps

• Sized to fit tubing rather than pipe
• High strength
  18-8 SS bolts and hardware
• Saddles cast from high strength aluminum or molded from polymer

Stainless Radial Plate w/ Coax Attachment

Makes radial attachment a snap!

• Fits pipe,
  4x4 and 6x6 posts!
• Patented high current coax connection to radials
• Accommodates up to 120 radials

Tilt Base

Easily raise/lower your Hustler, Hy-Gain or Butternut for tuning, weather, or CC&R accommodation.