DX Engineering's 4BTV 4-Band High Performance HF Vertical Antenna Systems DXE-HSR-4BTV-P1

5 out of 5 stars ( 1 )

Part Number: DXE-HSR-4BTV-P1

Not Available

Vertical Antenna, HF, 4BTV, High Performance System, 40, 20, 15 and 10 meters, Includes Radial Plate, Wire Kit, Tilt Base, Cable, Hardware, Kit
See More Specifications

DX Engineering's 4BTV 4-Band High Performance HF Vertical Antenna Systems DXE-HSR-4BTV-P1

DX Engineering's 4BTV 4-Band High Performance HF Vertical Antenna Systems DXE-HSR-4BTV-P1

DXE-HSR-4BTV-P1

5 out of 5 stars ( 1 )

Part Number: DXE-HSR-4BTV-P1

Not Available

Kit/Combo Contents

DX Engineering Ring Terminals DXE-225RT-20

Ring Terminals, 14-16 gauge Wire Range, 0.250 in. Hole Diameter, Set of 20

Kit Item Quantity: 1

DX Engineering RG-8U PL-259 Low-Loss 50-ohm Coax Cable Assemblies DXE-8UDX002

Coaxial Cable, RG-8/U, 11 AWG Stranded Copper Center, Flex Type I PVC Jacket, PL-259 Ends, 2 ft. Length, Ea.

Kit Item Quantity: 1

DX Engineering Direct Coax Feed Add-On Kits DXE-AOK-DCF

Direct Coax Feed Assembly, Add-On for Hustler BTV series HF verticals, Kit

Kit Item Quantity: 1

DX Engineering Instruction Manuals DXE-BTV-INST-INS

Instruction Manual, Hustler BTV Guide, 4-, 5-, 6-BTVs, New Assembly & High Performance Install, 60 pages, Each

Kit Item Quantity: 1

DX Engineering FSM-HWK Hardware Kits DXE-FSM-HWK

Hardware Pack for Flanged Bulkhead or Chassis Mount UHF Female Connectors, Kit

Kit Item Quantity: 1

DX Engineering Radial Plates DXE-RADP-3

Radial Plate, Stainless Steel, 1/8 x 11 5/8 in. sq., Pre-drilled, 60 holes, Includes 20 sets SS Hdwr., Each

Kit Item Quantity: 1

DX Engineering Premium Radial Wire DXE-RADW-500

Radial Wire, 14 AWG Stranded Copper, UV-resistant Black PVC Insulation, 500 ft. Length, Each

Kit Item Quantity: 1

DX Engineering Saddle Clamps DXE-SSVC-2P

Saddle Clamp, V-bolt Type, Stainless Steel, Natural, 1.0 in. - 2.0 in. Size, Each

Kit Item Quantity: 3

DX Engineering Radial Wire Metal Anchor Pins DXE-STPL-100P

Radial Wire Anchor Pins, Steel, 1.5 in. Width, 6.0 in. Height, Set of 100

Kit Item Quantity: 1

DX Engineering Tilt Base Antenna Mounting Systems DXE-TB-3P

Tilt Base Mount Plate, Stainless Steel, for Hustler BTV series, Requires 2 ea. SSVC-2P for Mounting Pipe, Kit

Kit Item Quantity: 1

DX Engineering Silver Plated UHF Flanged Double Female Bulkhead Connectors DXE-UHF-FDFB

Coaxial Connector, Flanged, Double UHF SO-239 Female, Bulkhead, PTFE/Silver Plated Brass, Requires Hdwr. Kit, Each

Kit Item Quantity: 1

Hustler 4-BTV 4-Band HF Vertical Antennas 4-BTV

Antenna, Vertical, HF, Resonant, 4-Band, 40, 20, 15, 10 meters, 1,500 W SSB, 1,000 W CW, 20 ft. Height, Each

Kit Item Quantity: 1

Overview

Brand:
Manufacturer's Part Number:
DXE-HSR-4BTV-P1
Part Type:
Product Line:
DXE Part Number:
DXE-HSR-4BTV-P1
Item Number:
3355284
HF Vertical Antenna Type:
Multi-band, resonant
Vertical Antenna Height:
21.50 ft.
Antenna Wind Survival:
55 mph
Antenna Power Rating:
1,500 W SSB/1,000 W CW
Maximum Antenna Tubing Diameter:
1.250 in.
Vertical Antenna Mount Type:
Standard tilt base
Antenna Mount Operation:
Single operator walk-up
HF Vertical Antenna Mount Material:
Stainless steel
Vertical Antenna Mount Included:
Yes
Mounting Clamps Included:
Yes
Mast Mounting Clamp Minimum:
1.250 in.
Mast Mounting Clamp Maximum:
1.750 in.
Radial Plate Included:
Yes
Radial Wire Included:
Yes
UNUN Included:
No
Antenna Tuner Requirement:
Antenna & installation dependent
Antenna Tuner Included:
No
Antenna Feedline Connection Type:
UHF female, SO-239
Antenna Weight:
15.00 lbs.
Quantity:
Sold as a kit.
Notes:
A greater number of radials improves performance, but radial length is not critical for a ground-mounted vertical antenna installation.
Requires Radials to Function Properly:
Yes

DX Engineering's 4BTV 4-Band High Performance HF Vertical Antenna Systems

DX Engineering 4BTV 4-Band High Performance HF Vertical Antenna Systems are convenient and economical antenna installation packages!

For your high performance HF ground mounted vertical system, the DX Engineering Hustler 4BTV Packages provide 40, 20, 15, and 10 meter band operation with:

-- Dramatically improved transmit and receive signals
-- Best possible signal pattern with proper RF connections
-- Safe and easy tuning using our patented Tilt Base so one person can walk the antenna up or down
-- Performance boosting, organized radial wire attachment system
-- Easy handling 14 gauge insulated radial wire, ring terminal crimp lugs and lawn staples

Included with these antenna packages, our exclusive High Performance Hustler BTV Assembly and Installation Guide will answer all your questions! You can read more right here about the best way to install your vertical antenna system, the reasons for installing a radial system, and find out how to "Install Radial Wires Without Digging". Click "More Detail" and then click the "Instructions" icon.

DX Engineering 4BTV 4-Band High Performance HF Vertical Antenna Systems include the essentials:

-- (1) HSR-4BTV - Hustler Four Band Trap Vertical Antenna
-- (1) DXE-TB-3P - Tilt Base for Hustler BTV Antennas
-- (1) DXE-RADP-3 - Radial Plate, Stainless Steel with 20 Sets of SS Attachment Hardware
-- (1) DXE-AOK-DCF - Direct Coax Feed SO-239 for Hustler BTV Verticals
-- (1) DXE-8UDX002 - Low Loss RG-8/U Coax Cable PL-259s, 2 ft., DCF to Bulkhead Connector Adapter
-- (1) DXE-UHF-FDFB-KIT - Connector Adapter, Bulkhead, UHF Female, SO-239, Silver Plating, PTFE Insulation
-- (1) DXE-RADW-500K - Bulk Radial Wire Kit, 500 ft. Wire, 20 Ring Terminals, 100 Lawn Staples
-- (3) DXE-SSVC-2P - Stainless Steel V-Clamp, 1 to 2 in. O.D. for Radial Plate and Tilt Base
-- (1) DX Engineering High Performance Hustler BTV Assembly and Installation Guide

Here is how it works: The radial wires prevent the ground from acting like a big RF sponge. You have heard all about ground losses. Radials counteract that, so more are better! With the feedline properly terminated at the radial system, the antenna will perform with improved pattern and lower noise, too! Your radial wire attachment is made easier and efficient with our Radial Plate. The Bulk Radial Wire Kit allows you to cut and install each radial as long as it can be, to fill your antenna space with radials, placed like spokes of a wheel for maximum signal benefit. Radial wires do not need to be resonant lengths on the ground. Many radials, even if they are short, are better than few long ones. Please, do not put your antenna on a metal fence. They are poor RF conductors, do not prevent ground losses, and they gather noise and put it right into your radio! Use a real radial system to make your HF antenna really play!

You can stay off the ladder using our Tilt Base for easy antenna tuning during installation. Plus it offers "tilted-up-only-when-operating" stealth or just an easy way to stow the antenna for approaching bad weather. Antenna installation and tuning is breeze with the Tilt Base.

Both accessories, the DX Engineering Radial Plate and Tilt Base are attached to your antenna mounting pipe or tube with the adjustable Stainless Steel V-Clamps. Any steel (NOT aluminum) pipe or tubing you use must be between 1 and 2 in. for the provided clamps. The mounting pipe may be set in concrete, since your system will be efficiently using many wire radials, instead of a pipe in the dirt that would lose a lot of your RF.

Note: For additional information, please look at the files under the "Documentation" tab.

Contact DX Engineering Customer Support for ordering or installation assistance.

Documentation

Replacement Parts

 Loading...
 Loading...

Reviews Write a Review

Some parts are not legal for use in California or other states with similar laws / regulations

Modal Header

Call To Order

This is a custom order part. You can order this part by Contacting Us.

CA Warning Icon

Cancer and Reproductive Harm.

Email this page