Instruction Sheets for Part Number ALO-DX-R8T
Not Available
Alinco DX-R8T SDR LW/MW/SW Amateur Radio Desktop Receivers
Receiver, SDR Capable, Desktop, All Mode, LCD Screen, 0.150-MHz-29.999 MHz, 600 Memories, 13.8 Vdc, Each
See More Specifications
Overview
Alinco DX-R8T SDR LW/MW/SW Amateur Radio Desktop Receivers
With Alinco DX-R8T SDR LW/MW/SW Amateur Radio Desktop Receivers the world of short wave awaits you! Now you can enjoy the thrill of listening to live short-wave or Amateur Radio signals from all over the world with the Alinco DX-R8T.
These new desktop shortwave radios are designed to be affordable without compromising performance. DX-R8Ts boast a communications-grade receiver circuit, 3 ceramic filters (FM/AM, SSB, and CW) with a narrow filter function, excellent 1ppm stability and a large, easy-to-read LCD screen. The I/Q output mode used with supporting SDR freeware lets you to output the I/Q signal from the 3.5mm stereo jack and decode DRM using only a PC and a sound card.
With simple operating commands and a straight-forward key layout, DX-R8Ts are radios that you can start enjoying from the moment you first turn one on. Packed with many features normally found only in more expensive shortwave receivers, DX-R8Ts are ready to capture the imagination of everyone from a beginner in the world of shortwave to the most experienced shortwave listener. These receivers are also a great second receiver for the ham shack!
DX-R8T receiver specifications:
* DX-R8 frequency coverage: DX-R8T: USA/Canada, 0.150-MHz-29.99999 MHz
* Operating modes: USB, LSB, AM, CW, FM and I/Q output for SDR software
* Receive circuitry Double conversion Superheterodyne
* Intermediate frequencies: 1st 71.75 MHz, 2nd 455 kHz
* Frequency stability: plus/minus 1ppm
* RIT variable range: plus/minus1.2KHz
* Selectivity: SSB, CW, AM (narrow): 2.4 kHz/-6dB, 4.5 kHz/-60dB.
* Selectivity: AM and FM: 6 kHz/-6dB, 18 kHz/-60dB.
* Sensitivity:
-- SSB: 0.15 to 1.8MHz; 0 dBu (1uV)
-- CW: 1.8 to 30 MHz; -12 dBu (0.25uV)
-- AM: 0.15 to 1.8 MHz +20 dBu (10uV)
-- AM: 1.8 to 30 MHz; +6 dBu (2uV)
-- FM: 28 to 30 MHz; -6 dBu (0.5uV)
* Spurious and image rejection ratio: More than 70 dB
* Audio output power: More than 2.0W, 8 ohms, 10 percent THD
* Antenna impedance: 50 ohm unbalanced
* Power requirement: 13.8V DC nominal; 11.7 to 15.8V DC
* Ground polarity: Negative ground
* Current drain: 1.0A maximum
* Operating temperature: -14 F to 140 degrees F
* Dimensions: 9.45 in. x 3.7 in. x 10.0 in. (cabling not included)
* Weight: approximately 9.04 lbs.
* Includes DC cable: EDC-37
Note: For additional information, please look at the files under the "Documentation" tab.
These desktop receivers may be used as stand-alone SWL or ham receivers. You may also use their "Mute" function to work in conjunction with a transmitter or transceiver; new or old. Alinco DX-R8T SDR LW/MW/SW Amateur Radio Desktop Receivers, now available from DX Engineering, are quality, affordable general coverage receivers.
Documentation
Reviews Write a Review
Some parts are not legal for use in California or other states with similar laws / regulations
Modal Header
Call To Order
This is a custom order part. You can order this part by Contacting Us.