Bioenno Power SC-122430NE MPPT Solar Charge Controllers are state-of-the-art MPPT (Maximum Power Point Tracking) Solar Charge Controllers designed for installations requiring zero compromises. The SC-122430NE features a 20A maximum load current and is designed to work with LiFePO4 (Lithium Iron Phosphate) batteries and can also be used with AGM and SLA batteries. The SC-122430NE Solar Charge Controllers use a proprietary CC/CV (Constant Current/ Constant Voltage) and MPPT (Maximum Power Point Tracking) circuitry to ensure maximum compatibility and performance with Bioenno Power batteries. The built-in LCD display provides a visual presentation of the usage status of your solar system. The SC-122420NE boasts cutting-edge performance parameters, flexibility and modular capabilities with high aftermarket compatibility with most batteries and solar panels for fixed installation applications.

Note: This solar charge controller can accept any voltage under 75V but it will not boost the voltage if the panel voltage is less than the battery voltage. Make sure your panel voltage is higher than your battery voltage for optimum performance.

Bioenno Power SC-122430NE - Additional Features and Specifications:

• Rated Voltage: 12/24 VDC

• Maximum Solar Recharge Current (Charge Current to Battery): 30A

• Maximum Direct Load Current (LOAD Port Only!): 20A

• Input Voltage Range: 75 VDC*

• Load Disconnect: 9.9/11.2/13.2/14 VDC (Dependent on system voltage)

• Efficiency: ≤98% (In optimum conditions)

• Communication: RS232

• External Temperature Sensor Port

• Connection Terminals: PV, BAT, Load

• Operation Temperature: -31°F to 113°F (-35°C to 45°C)

• Dimensions: 9.370 x 6.811 x 2.874 (238mm x 173mm x 73mm)

• Weight: 4.41 lbs. (2.0 kg)