Instruction Sheets for Part Number INR-RX7300
Not Available
INRAD RX7300 Receive Only Input Modification Kits
Receive Only Antenna Jack, for IC-7300, Each
See More Specifications
Overview
INRAD RX7300 Receive Only Input Modification Kits
INRAD RX7300 Receive Only Input Modification Kits allow you to add a receive antenna jack to the Icom IC-7300! This mod makes a game-changing radio even better!
INRAD's easy to install plug-in modification requires no soldering and is effortlessly installed and easily reversible. RX7300 kits may also be used for the insertion of accessory items into the receiver chain on the IC-7300; like receive only band-pass filters, low-noise preamps and so on.
Once the kit is installed, the IC-7300 transceiver will transmit using the existing SO-239 connector and receive through one of the two RX7300 RCA phono jacks. To use the transceiver in its original configuration, leave the provided RG-174 coax loop installed in the receive path (connected between both RCA jacks).
Below is a note from the INRAD RX7300 manual:
"Please note that large transmit signals, even possibly your own, have the capability to damage a transceiver. The receive input on the Icom 7300 is diode protected, but we also recommend the use of a front-end protection circuit in between the receive antenna jack and your external receive-only antenna, especially if you employ the use of a linear amplifier. This is also true in a situation like a multi-transmitter contest station where other stations may be transmitting with high power while you are receiving. In these types of situations, we recommend the use of a front-end limiter or RX protection between the receive antenna jack and the receive antenna itself."
The above statement is true of ANY receiver or transceiver operated in a large-signal environment. DX Engineering recommends the use of our RG5000HD Receiver Guard Electronic RF Limiters to satisfy the need for front-end protection.
These INRAD RX7300 Input Modification Kits from DX Engineering require only a very slight amount of work to install but offer huge benefits for Contesters, DXers and those interested in serious weak-signal work!
Documentation
Reviews Write a Review
Some parts are not legal for use in California or other states with similar laws / regulations
Modal Header
Call To Order
This is a custom order part. You can order this part by Contacting Us.