Overview

LDG Electronics KT-100 Automatic Antenna Tuners

LDG Electronics KT-100 Automatic Antenna Tuners serve as dedicated tuners for Kenwood radios and are fully automatic… just press the "TUNE" button on the radio.

LEDs on the front panel indicate tuning status and will show a match in seconds, or even LESS if you've tuned on or near that frequency before. KT-100 tuners have 2,000 memories for instant recall of the tuning parameters for your favorite bands and frequencies.

If you have a Kenwood AT-300 compatible Kenwood radio, you can simply plug KT-100 tuners into your transceiver with the provided cable. The interface cable powers the tuner, and the "TUNE" button on the radio starts the tuning cycle. The supplied interface cable makes the KT-100s work as dedicated tuners for most modern Kenwood transceivers.

Flexible, low-cost, easy to use, and just right for your Kenwood transceiver, LDG Electronics KT-100 tuners fit in right were you need them the most.

Additional features include:

* 0.1 to 125 watt power range (SSB and CW), 100W on 6M
* Controlled from Kenwood "TUNE" button on radio and powered from Kenwood radio
* Works with any Kenwood radio that is AT-300 compatible
* Partial radio list: TS-480 (not HX), plus the following and their variants; TS-50, TS-570, TS-590, TS-690, TS-850, TS-870, TS-990 and TS-2000
* Not recommended for TS-480HX, Kenwood programming limits RF power to 100 watts if an external tuner is detected
* Tuning time is 0.1 to 6 seconds full tune, 100 milliseconds memory tune
* 1.8 to 54.0 MHz coverage with built-in frequency sensor
* Tunes 6 to 1,000 ohm loads (16 to 150 on 6M), 6 to 4,000 ohms with optional 4:1 balun
* For dipoles, verticals, inverted Vs, beams, or any coax-fed antenna
* Optional external balun allows tuning of random length, long wire, or ladder line fed antennas
* Weighs 2 lbs.

Note: For additional information, please look at the files under the "Documentation" tab.

Do you have a Kenwood transceiver that needs a good outboard antenna tuner? Think about one of these LDG Electronics KT-100 Automatic Antenna Tuners from DX Engineering!

Documentation

Reviews Write a Review