SO9I Engineering HamCore 6X2 Antenna Switch SE-6X2-SW
Part Number: SIO-SE-6X2-SW
SO9I Engineering HamCore 6X2 Antenna Switch
Antenna Switch, 6 Antennas/2 Radios, SO2R, 1-50MHz, 4kW, Ethernet/WiFi/Built-in Access Point, >80 dB Isolation, (2) RCA PTT Inputs, 12VDC/or POE, Each
See More Specifications
Estimated Ship Date: Dec 31, 2026 Would you rather pick it up?
Overview
SO9I Engineering HamCore 6X2 Antenna Switch
The SO9I Engineering HamCore 6X2 Antenna Switch is a network-controlled RF antenna switch built for SO2R and multi-operator stations, allowing two independent transceivers to seamlessly access and share up to six antennas. The automation, control interface and radio integration are all built directly into the switch itself: there is no separate controller box, no proprietary control cable, and no software to install.
HamCore connects to your shack network over Ethernet or WiFi and is operated entirely through a standard web browser, from a laptop, tablet or phone. It reads the operating frequency and PTT status from each radio independently and switches antennas automatically as each operator changes bands. Built-in protection prevents one radio from grabbing an antenna the other operator is already using.
- Proven Performer at WRTC 2026 -
Proven in competition, the HamCore 6×2 delivered outstanding performance at the World Radiosport Team Championship 2026, the premier event in amateur radio contesting, even under demanding field conditions and unstable generator-supplied power.
Typical Applications
- SO2R Contesting: One operator running two radios, with automatic protection against both radios landing on the same antenna
- Multi-Operator Stations: Two independent operating positions sharing one antenna farm
- Compact Two-radio Setups: One device, one power connection, no controller to rack up separately
- FlexRadio and SmartSDR Stations: Direct TCP/IP integration reads frequency and PTT per radio with no extra cabling
NOTE: HamCore 6×2 is designed for indoor or sheltered installation. For outdoor mounting it must be fitted inside an additional weatherproof enclosure.
Why HamCore 6×2?
- Two Radios, Six Shared Antennas: Both radios draw from the same pool of six antennas, each with independent band automation. This eliminates the need to duplicate antennas for each operating position.
- Automation Built In: HamCore reads frequency and PTT data directly from each FlexRadio or compatible logging software, automatically switching antennas as needed. No MOAS switch or external controller is required.
- Flexible Connectivity: Connect via Ethernet, Wi-Fi client mode, or the unit's built-in access point. HamCore adapts easily to permanent station installations, portable operations, and contest environments without requiring additional network infrastructure.
- Antenna-Collision Protection: Integrated interlock logic prevents either radio from selecting an antenna already in use by the other radio and blocks antenna changes while a radio is transmitting. This helps protect equipment and prevents operator errors.
- Browser-Based Control: No software installation is required. Configure and control both radios from any modern web browser on Windows, macOS, Linux, iOS, or Android devices.
- Independent Transmit and Receive Antenna Selection: Rx Split operation allows each radio to receive on a different antenna than it uses for transmitting. When transmission begins, HamCore instantly switches to the designated transmit antenna and returns to the receive antenna when transmission ends.
Included Components:
SO9I HamCore 6x2 Antenna Switch
12VDC Power Adapter
LAN (Ethernet Cable)
WiFi Antenna (SMA)
Additional Features & Specifications:
Characteristic Impedance: 50 Ω
Antenna Ports: 6 (ANT 1–ANT 6) Shared between both transceivers
Radio Ports: 2 R1 & R2 (INPUT)
Maximum Power: 4,000 W PEP (CW/SSB) @ SWR < 1.5:1
Insertion Loss: < 0.1 dB
Maximum SWR: 1.12:1
Isolation Between Radio Ports: > 80 dB (6×2 version, between R1 and R2)
RF Connectors: UHF SO-239
Power Supply: 12 VDC nominal (11–15 VDC operating range)
Power Input Options: DC barrel jack or passive PoE over the LAN cable
Power Connector: 5.5 × 2.5 mm DC barrel jack, center-positive
Network Connectivity: Ethernet (RJ45), WiFi client, or built-in Access Point
WiFi Band: 2.4 GHz
Communication Medium: WiFi or LAN
Control Interface: Built-in web server accessible from any modern web browser; no app required
Control Modes: Manual or automatic operation
Automatic Antenna Selection: Supports hands-free antenna switching when integrated with FlexRadio (TCP/IP) or compatible logging software
PTT Input: 2 × RCA jacks, TX-GND signal (PTT R1, PTT R2 One per radio)
Radio Integration: FlexRadio (TCP/IP) or logging software for automatic frequency-based antenna selection
Interlock Protection: Hardware and software interlocks prevent two radios from being connected to the same antenna simultaneously
Unused Antenna Protection: Unselected antenna ports are automatically grounded
Deployment Flexibility: Operates without an internet connection or router using the built-in WiFi Access Point or direct Ethernet connection; ideal for portable, off-grid, and emergency communications
SO2R / Multi-Operator Support: Designed for Single Operator Two Radio (SO2R) and multi-operator station configurations
Enclosure: Powder-coated steel with black finish
Dimensions (W × H × D): 10.43 × 6.30 × 3.0 in (265 × 160 × 76 mm)
Weight: 5.5 lbs. (2.5kg)
Ingress Protection: Indoor use only; not weatherproof
Specifications
Reviews Write a Review
Some parts are not legal for use in California or other states with similar laws / regulations
Modal Header
Call To Order
This is a custom order part. You can order this part by Contacting Us.