AnyTone BT-01 Bluetooth Speaker Microphones

AnyTone BT-01 Bluetooth Speaker Microphones allow for the remote operation of all features and functions available on the D578UV, AT-D578UV PRO, AT-D578UV III PRO, AT-D578UV PLUS and AT-D578UV III PLUS DMR mobile transceivers. This simplifies mobile installations by allowing flexible transceiver mounting options like under the seat, in the trunk, or any other convenient mounting location.

The BT-01 features a 2.2 inch color LCD display, larger than the 1.7 inch display built into the compatible mobile transceivers! Additional visual feedback to the operator is provided by two multi-color LEDs on the front panel. The built in speaker delivers a full Watt of audio power and is easy to understand, even in loud environments.

Operating the BT-01 with one of the supported transceivers is possible with a convenient Bluetooth wireless connection, as well as the included 13 ft. hardwired connection cable. The integrated 3.7 VDC, 1,800 mAh battery is rechargeable with the included USB-C cable when connected to the built in USB port. The BT-01 battery is charged automatically when it’s hardwired to a transceiver.

The BT-01 features a simple and intuitive user configuration. Assign frequently used functions to the 3 programmable side keys below the PTT for quick access to these assigned functions. The holding time of these keys is customizable in three steps, with a total of 9 functions that are assignable to these keys. The "programming" can be done via the Bluetooth menu in the software of the mobile transceiver, as well as directly on the BT-01 microphone. The operating concept of the BT-01 is based on the familiar AnyTone concept, zones and channels are switched using the up/down buttons and direct frequency entries are entered with the illuminated numeric keypad.

The following AnyTone DMR Mobile Transceivers are compatible with the BT-01 Bluetooth Speaker Microphones.

• AT-D578UV PRO

• AT-D578UV III PRO

• AT-D578UV PLUS

• AT-D578UV III PLUS

  

Included Accessories

• Belt Clip

• USB-C/USB Type-A Charging Cable

• 13 ft. Alternate Connection Cable

IMPORTANT: When using the optional BT-01 Bluetooth Speaker Mic with the AT-D578UVIII Plus transceivers, BOTH require a firmware update. Follow the AnyTone Bluetooth Firmware Update Procedure located under “Documents” and then proceed to the link below to download the proper Firmware Upgrade Pack. This update process requires the use of an Android Smart Phone or Tablet and a PC with a functional USB port.

AnyTone Firmware Download Link

Additional Features and Specifications

Bluetooth Version: 5.0 +EDR

Protocol: HFP, HSP, A2DP, AVRCP, SPP

Transmit Distance: 32.81 ft. (10 Meters)

Maximum Transmission Power: Class2, 4 dBm

Sensitivity: -80 dBm

Audio performance: SBC Decoding

Speaker: 1 Watt, 8 Ohms

LED: Green/Red

LCD Screen 2.2 in.

Charging: 5 VDC, USB-C/USB Type-A Cable (Included)

Battery: 1,800 mAh, 3.7 VDC

Headphone Jack: 3.5mm

Working Temperature: -4° to 131° (-20°C to 55°C)

Dimensions: 4.291 x 2.441 x 1.102 in. (109x62x28mm) (HxWxD)

Weight: 0.32 lbs. 5.19 oz. (147g)