Technical Articles for Part Number ICO-AH-6
Icom AH-6 Compact Remote Automatic Antenna Tuners
Antenna Tuner, HF/6M, Compact, Automatic,1.8-54MHz, 120W Max, 200 Memories, For IC-7760/7610/7300/7300MK2/7100/IC-718, Control Cable, Hardware, Each
See More Specifications
Estimated Ship Date from Ohio: Today Would you rather pick it up?
Overview
Icom AH-6 Compact Remote Automatic Antenna Tuners
Icom AH-6 Compact Remote Automatic Antenna Tuners are a lightweight, weather-resistant automatic tuner designed to provide reliable multiband operation from 1.8 to 54 MHz. Compatible with both long-wire antennas and 50-ohm antennas such as verticals and dipoles, the AH-6 offers exceptional installation flexibility for fixed, portable, and field operations. Its compact design is approximately 50% smaller and lighter than the Icom AH-730, making it an ideal choice where space and weight are important considerations.
With fully automatic tuning activated directly from a connected Icom transceiver, the AH-6 typically achieves a match in just 2 to 3 seconds and stores up to 200 tuning memories for near-instant retuning on previously used frequencies. During the tuning process, RF output is reduced to approximately 0.3 watts, minimizing interference to nearby stations. Built with a rugged IP54-rated enclosure that resists dust, water, and harsh outdoor conditions, the AH-6 is well suited for permanent outdoor installations. It supports input power up to 120 watts and includes a 32.8 ft. OPC-1465 control cable along with mounting hardware for easy installation.
Whether you're building a compact HF station, installing a remote wire antenna, or seeking a versatile tuner for portable operation, the Icom AH-6 delivers fast, dependable automatic antenna matching across multiple amateur bands.
The AH-6 antenna tuner is compatible with IC-7760, IC-7610, IC-7300, IC-7300MK2, IC-7100, and IC-718.
Supplied Accessories:
Control cable - OPC-1465, 32.8 ft. (10 m)
Mounting kit (U-bolts and plates)
Key Features
- Seamlessly switch between long wire and 50-ohm antennas with a simple selector switch, eliminating the need for separate antenna tuners.
- Wide frequency coverage from 1.8 MHz (160 meters) through 50 MHz (6 meters).
- High-speed automatic tuning in as little as 2 to 3 seconds, with 200 memory channels for approximately 1-second retuning on previously matched frequencies.
- Compact and lightweight design with the same footprint as the AH-4 and approximately 50% less size and weight than the AH-730.
- Quick and convenient installation with cable connections accessible without opening the enclosure.
- Minimized interference during the tuning process by reducing RF output to approximately 0.3 watts through an internal attenuator.
- Rugged IP54-rated construction provides dust protection and water resistance for reliable outdoor installation.
Additional Features & Specifications:
Frequency Coverage:
Long Wire Antenna
- 1.8 to 54 MHz with a wire length of 98.4 ft. (30m) or longer
- 3.5 to 54 MHz with a wire length of 7 m (23 ft.) or longer
50-Ohm Antenna:
- 1.8 to 54 MHz (16.7 to 150 Ohms)
Maximum Input Power: 120 Watts
Tuning Power Required: 5 to 15 Watts (10 Watts nominal)
Input Impedance: 50-Ohm
Power Requirement: 13.8 VDC ±15% (supplied by compatible transceiver)
Current Drain: 0.6A maximum
Tuning Accuracy: VSWR 2.0:1 or less (except at multiples of ½ wavelength)
Memory Channels: 200
Tuning Time: 2 to 3 seconds average; maximum 15 seconds
Operating Temperature Range: 14°F to 140°F (-10°C to +60°C)
Ingress Protection Rating: IP54 dust-protected and water-resistant
Dimensions (W × H × D): 6.8 × 9.1 × 2.8 in. (172 × 230 × 71mm)
Mast Mounting Diameter: 1.6 – 2.4 inches
Weight: Approximately 2.75 lbs. (1.25 kg)
Antenna Connections: Long-wire antenna and SO-239 connector for 50-ohm antennas
Specifications
Documentation
Reviews Write a Review
Some parts are not legal for use in California or other states with similar laws / regulations
Modal Header
Call To Order
This is a custom order part. You can order this part by Contacting Us.