Yaesu SCU-LAN10 Network Remote Control System brings the advanced functionality of Ethernet LAN port direct remote control to the unparalleled FTDX-101D and FTDX-101MP Transceivers and the impressive, compact and affordable FTDX10 (All FTDX10 versions are supported), and FT-710 Transceivers. All of the excitement of these phenomenal radios is available to any PC, on your local network or via the Internet from anywhere in the world, with the SCU-LAN10 interface units connected to the transceiver and a local network or the Internet.

Equip your Yaesu FTDX-101MP, FTDX-101D, FTDX10, or FT-710 transceiver for Internet LAN remote control operations with the Yaesu SCU-LAN10 Network Remote Control interface unit from DX Engineering.

Important: Using the SCU-LAN10 with an FT-710 REQUIRES the use of a YSU-E-DC-6 DC Power Cable, as specified on page 12 of the FT-710 user manual.

SCU-LAN10 Network Remote Control Software is available for download from www.yaesu.com

Also available from the same link is the required Firmware Update versions listed here for the FTdx-101 series transceiver to be used with the SCU-LAN10 Interface:

- MAIN: V01-14

- DISPLAY: V01-06

- IF DSP: V01-05

- SDR: V02-03

To confirm the firmware version on your FTdx-101 series transceiver, press [FUNC] key, touch [EXTENSION SETTING] and then select [Soft Version]. The software version will be displayed.

Each SCU-LAN10 unit includes a special 13-pin DIN interface cable, a USB cable and two Snap-on ferrite RFI suppressors.

Specifications:

• Supply Voltage: 13.8 VDC Nominal

• Operating Voltage: 9 VDC to 15.2 VDC

• Current Consumption: 800 mA (max)

• Operating Temp Range: +32F-122F (0C to 50C)

• Dimensions: (WHD) 4.37 x 1.24 x 5.31 in. (111 x 31.5 x 135mm)

• Weight: 0.93 lbs. (420g)

Important Notes:

* A wired LAN port Ethernet router connection is required. Wi-Fi is not supported.

* When using the internet, a fixed global IP address or fixed domain name is required for the network where the remote controlled radio is installed.