Chameleon Antenna Universal Remote Antenna Tuners will work with most antenna types and transceivers. The CHA-URT1 is a unique outdoor antenna tuner that can be used for coaxial cable or wire fed antennas. These wide-range antenna tuners will match wire antennas, such as a vertical, random wire, or a long wire antenna. They can also be used with coaxial-fed antennas, like an Inverted “V” or dipoles. Additionally, the CHA-URT1 does not need a transceiver-specific control cable, so it works with any brand or model of transceiver.

These Chameleon Antenna Universal Remote Antenna Tuners consist of two units: a Coupler Unit and the Tuner Unit. The rugged weatherproof Tuner Unit contains the antenna matching network and controller, and is designed to be permanently installed outdoors at or near the antenna feedpoint, so loss due to high SWR on the feedline is avoided. The Coupler Unit contains the operator controls and status indicators. It uses a bias-T circuit to send power and control signals to the remote Tuner Unit over the connecting coaxial cable, so there is no need to order or install a separate transceiver-specific control cable. The Coupler Unit is not weatherproof and must be installed inside near the operator and transceiver.

The CHA-URT1 features 16,000 memories for quick recall and tuning with previously used settings. Frequency coverage ranges from 1.8 – 54.0 MHz and can match any antenna with an impedance of 5 to 1,500 Ohms within seconds and can handle up to 125 Watts on SSB/CW (see specifications).

Includes:

• 1 - Universal Remote Tuner

• 1 - Coupler Unit

• 1 - 12V Hardwire Power Cable

• 2 - U-Bolt Attachment Brackets and Hardware

• 2 - U-Bolts (1/4" x 1-3/4" x 3")

Magnetic Latching Relay: Once the tuner is tuned, the relay's latch and power is turned off, saving on battery drain. The tuned frequency will be stored in memory. When you change frequency or bands you need to apply power and energize the tuning process again. If the frequency is in memory the tuning process will be quick !

Additional Features and Specifications: Frequency Range:

• 1.8 to 54.0 MHz.

Power Handling:

• 125W SSB phone/CW

• 100W SSB phone/CW - 50 MHz

• 60W Digital

Tuning Power Range: 0.5 – 15W.

Tuning Time: 5 Seconds for full tune, 0.1 Seconds for memory tune.

Memory: 16,000 frequencies.

Power Supply: 12-14VDC, 1A

Power Supply Cable: (Included) - 5.5mm x 2.1mm, Center Pin Positive

Current Consumption: 500mA or less

Temperature Range: Approximately 14℉ (-10C) to 140℉ (60C).

Tuner Unit Dimensions: 8.78 x 5.12 x 1.77 in. (223 x 130 x 45 mm)

Tuner Unit Weight: 38.8 oz. (1100g)

Coupler Unit Dimensions: 5.04 x 4.13 x 1.69 in. (128 x 105 x 43mm)

Coupler Unit Weight: 14.1 oz. (400g)