Instruction Sheets for Part Number DXE-HSR-4BTV-P3
DX Engineering 4BTV Four-Band High Performance HF Vertical Antenna and Original Tilt Base Systems DXE-HSR-4BTV-P3
Part Number: DXE-HSR-4BTV-P3
DX Engineering 4BTV Four-Band High Performance HF Vertical Antenna and Original Tilt Base Systems
Vertical Antenna, HF, 4BTV, High Performance System, 40, 20, 15 and 10M, w/Radial Plate, Orig. Tilt Base, SO239 Bracket, Cable, Hardware, Kit
See More Specifications
Estimated Ship Date: Tomorrow Would you rather pick it up?
Kit/Combo Contents
DX Engineering DXE-8UDX002 - DX Engineering RG-8U PL-259 Low-Loss 50-ohm Coax Cable Assemblies
Coaxial Cable, RG-8/U, 11 AWG Stranded Copper Center, Flex Type I PVC Jacket, PL-259 Ends, 2 ft. Length, Ea.
Kit Item Quantity: 1
DX Engineering DXE-AOK-DCF - DX Engineering Direct Coax Feed Add-On Kits
Direct Coax Feed Assembly, Add-On for Hustler BTV series HF verticals, Kit
Kit Item Quantity: 1
DX Engineering DXE-BTV-INST-INS - DX Engineering Instruction Manuals
Instruction Manual, Hustler BTV Guide, 4-, 5-, 6-BTVs, New Assembly & High Performance Install, 60 pages, Each
Kit Item Quantity: 1
DX Engineering DXE-FSM-HWK - DX Engineering FSM-HWK Hardware Kits
Hardware Pack for Flanged Bulkhead or Chassis Mount UHF Female Connectors, Kit
Kit Item Quantity: 1
DX Engineering DXE-RADP-3 - DX Engineering Radial Plates
Radial Plate, Stainless Steel, 1/8 x 11 5/8 in. sq., Pre-drilled, 60 holes, Includes 20 sets SS Hdwr., Each
Kit Item Quantity: 1
DX Engineering DXE-SSVC-2P - DX Engineering Saddle Clamps
Saddle Clamp, V-bolt Type, Stainless Steel, Natural, 1.0 in. - 2.0 in. Size, Each
Kit Item Quantity: 3
DX Engineering DXE-TB-3P - DX Engineering Tilt Base Antenna Mounting Systems
Tilt Base Mount Plate, Stainless Steel, for Hustler BTV series, Requires 2 ea. SSVC-2P for Mounting Pipe, Kit
Kit Item Quantity: 1
DX Engineering DXE-UHF-FDFB - DX Engineering Silver Plated UHF Flanged Double Female Bulkhead Connectors
Coaxial Connector, Flanged, Double UHF SO-239 Female, Bulkhead, PTFE/Silver Plated Brass, Requires Hdwr. Kit, Each
Kit Item Quantity: 1
Hustler Antenna 4-BTV - Hustler 4-BTV 4-Band HF Vertical Antennas
Antenna, Vertical, HF, Resonant, 4-Band, 40, 20, 15, 10 meters, 1,500 W SSB, 1,000 W CW, 20 ft. Height, Each
Kit Item Quantity: 1
Overview
DX Engineering 4BTV Four-Band High Performance HF Vertical Antenna and Original Tilt Base Systems
are convenient and economical antenna installation packages that provide 40, 20, 15, and 10 meter band operation with:
Dramatically improved transmit and receive signals
Best possible signal pattern and performance boost with organized radial wire attachment system
Simplified and long-lasting RF connections with proper connectors and cable
Safe and easy tuning using our patented Tilt Base so one person can walk the antenna up or down
Professional grade stainless steel clamps and mounting hardware
Make contacts beyond expectations! Operate with a versatile HF multi-band vertical antenna that performs to its full potential.
For your high performance installation this HF Vertical Antenna and Original Tilt Base System includes these items:
(1) HSR-4BTV - Hustler 4 Band Trapped Vertical Antenna
(1) DXE-TB-3P - Tilt Base for Hustler BTV Antennas
(1) DXE-RADP-3 - Radial Plate, Stainless Steel with 20 Sets of SS Attachment Hardware
(1) DXE-AOK-DCF - Direct Coax Feed SO-239 for Hustler BTV Verticals
(1) DXE-8UDX002 - Low Loss RG-8/U Coax Cable with PL-259s, 2 ft., DCF to Bulkhead Connector Adapter
(1) DXE-UHF-FDFB-KIT - Silver Plated Flanged Double Female Bulkhead SO-239 Connector
(1) DXE-FSM-HWK - Hardware Kit for Flanged Connectors
(3) DXE-SSVC-2P - Stainless Steel V-Clamp, 1 to 2 in. OD for Radial Plate and Tilt Base
(1) DX Engineering High Performance Hustler BTV Assembly and Installation Guide
Then add your choice of insulated Premium Radial Wire or bare Tinned Copper Radial Wire with Ring Terminals and Radial Wire Staples to complete this antenna system. See the Suggested Parts listing and read The Guide for details.
Our exclusive High Performance Hustler BTV Assembly and Installation Guide will answer all your questions! Read about the best way to install your vertical antenna system, the reasons for installing a radial system, and find out how to "Install Radial Wires Without Digging". Click the "Documentation" link to read The Guide.
Specifications
Brand:
Manufacturer's Part Number:
DXE-HSR-4BTV-P3
Part Type:
Product Line:
DXE Part Number:
DXE-HSR-4BTV-P3
HF Vertical Antenna Type:
Multi-band, resonant
Vertical Antenna Height:
21.50 ft.
Antenna Wind Survival:
55 mph
Antenna Power Rating:
1,500 W SSB/1,000 W CW
Maximum Antenna Tubing Diameter:
1.250 in.
Vertical Antenna Mount Type:
Standard tilt base
Antenna Mount Operation:
Single operator walk-up
HF Vertical Antenna Mount Material:
Stainless steel
Vertical Antenna Mount Included:
Yes
Mounting Clamps Included:
Yes
Mast Mounting Clamp Minimum:
1.250 in.
Mast Mounting Clamp Maximum:
1.750 in.
Radial Plate Included:
Yes
Radial Wire Included:
No
UNUN Included:
No
Antenna Tuner Requirement:
Antenna & installation dependent
Antenna Tuner Included:
No
Antenna Feedline Connection Type:
UHF female, SO-239
Antenna Weight:
16.50 lbs.
Quantity:
Sold individually.
Notes:
Owner-supplied radial wires are required. A greater number of radials improves performance, but radial length is not critical for the ground-mounted HF vertical antenna. Elevated HF verticals require a min. of 2 quarter-wave radials per band.
Requires Radials to Function Properly:
Yes
Documentation
Loading...
Loading...
Reviews Write a Review
Some parts are not legal for use in California or other states with similar laws / regulations
Modal Header
Call To Order
This is a custom order part. You can order this part by Contacting Us.
Email this page