Charts & Guides for Part Number DXE-RG400-CTL
Technical Articles for Part Number DXE-RG400-CTL
RG-400 High-Isolation Double-Shield 50-ohm Coaxial Cable DXE-RG400-CTL
Part Number: DXE-RG400-CTL
RG-400 High-Isolation Double-Shield 50-ohm Coaxial Cable
Coax Cable, RG400, 20 AWG Silver Plated Stranded Copper Center, Double Braid Silver-Copper Shield, PTFE Dielectric, FEP Jacket, Per Foot
See More Specifications
Estimated Ship Date from Ohio: Today Would you rather pick it up?
Overview
Brand:
Manufacturer's Part Number:
DXE-RG400-CTL
Part Type:
Product Line:
DXE Part Number:
DXE-RG400-CTL
Coaxial Cable Type:
RG-400
Coaxial Cable Jacket Outside Diameter:
0.195 in.
Coaxial Cable Jacket Material:
FEP
Center Conductor Gauge:
20 AWG
Center Conductor Material:
Silver plated copper
Center Conductor Construction:
19 strands of 32 AWG
Dielectric Material:
PTFE
Dielectric Outside Diameter:
0.116 in.
Shield 1 Construction:
Braided
Shield 1 Material:
Silver plated copper
Shield 2 Construction:
Braided
Shield 2 Material:
Silver plated copper
Loss Per 100 ft. at 30 MHz:
2.2 dB
Velocity Factor Percentage:
69.5
Assembled:
No
UV-Resistant:
Yes
Direct Bury:
No
Quantity:
Sold by the foot.
RG-400 High-Isolation Double-Shield 50-ohm Coaxial Cable
RG-400 is a high-isolation 50-ohm coaxial cable that is ideal for critical, very low signal level, low noise applications as well as high power handling for RF equipment interconnections. Proper terminations on RG-400 cable assemblies provides extremely low crosstalk and very low noise ingress with a double-braid shielding effectiveness that results in over 100dB of isolation across HF frequencies. This cable is Mil-Spec equivalent to M17/128-RG400.
RG-400 is compatible with N-type and PL-259 solder type connectors with UG-175S reducers for RG-58 size cables.
NOTE: RG-400 has an OD of 0.195 inch and is NOT the same as DXE-400MAX which is 0.405 inch OD.
RG-400 Specs:
Center Conductor: Silver Plated Copper – 20AWG
Center Conductor Diameter: 0.0384 in. (19 strands of 0.008 in.)
Dielectric: PTFE (Polytetrafluoroethylene)
Dielectric Diameter: 0.116 in.
Shield Construction: Two Layers of Braided Silver Plated Copper
Shield Outer Diameter: 0.156 in.
Jacket: FEP (Fluorinated ethylene propylene)
Cable Overall Diameter: 0.195 in.
Minimum Bend Radius: 1.0 in.
Weight (lbs. per 1,000 ft.): 50.0
Capacitance: 29.4 pF/ft.
Maximum Voltage: 1,900 V
Velocity factor (VF), nominal: 69.5% (0.695)
Click "More Detail" for more information
Documentation
Loading...
Loading...
Reviews Write a Review
Some parts are not legal for use in California or other states with similar laws / regulations
Modal Header
Call To Order
This is a custom order part. You can order this part by Contacting Us.
Email this page