ELAD ASA16 Amplified Antenna Splitters

ELAD ASA16 Amplified Antenna Splitters are designed to distribute the signal from one antenna to up to six different receivers simultaneously. These six outputs are isolated to prevent interference from mismatches, but they do not provide any amplification. A switchable attenuator reduces the input signal by 15dB. A notable feature is the PTT input. When engaged, all receiver ports are isolated by more than 60dB (at 12MHz) from the input. This reliably protects even the most sensitive inputs. The integration into a ham radio station is made easy due to the same switching polarity of most transceivers, when keyed, the PTT output switches to ground. All coaxial connectors on the ASA16 are BNC female, and all inputs and outputs are designed for a 50-Ohm impedance. Three LEDs on the front show the current state of the ASA16: On/Off, Attenuator and PTT state. The ASA16 requires a 12VDC 300mA power supply (not included). The PTT connector is a stereo 1/8in. (3.5mm) male plug. The enclosure is made from brushed aluminum, with solid rubber padding.

Upgrade your RX antenna distribution system with the ELAD ASA16 Amplified Antenna Splitter, ensuring reliable and high-quality signal reception across multiple receivers.

Included Accessories:

• PTT Cable - Stereo 1/8in. (3.5mm) male plug

• DC Power Cable - 2.1mm plug to unterminated

• User Manual

Key Features:

• Six Outputs: The ASA16 features (6) 50-Ohm BNC female coaxial connectors, enabling you to connect six receivers.

• 15dB Attenuator: A built-in, switchable15dB attenuator can be activated from the front panel,

  reducing the signal by 15dB.

• PTT Input: The ASA16 includes a PTT (Push-To-Talk) input that grounds the antenna input when activated, indicated by the OUTPUT OFF LED.

• Power Supply: The ASA16 operates on 13.8VDC, with a typical power consumption of 300mA (power supply is not included). The power status is indicated by an ON LED on the front panel.

Specifications

General:

Input Connection: (1) 50-ohm BNC Female Coaxial Connector

Output Connections: (6) 50-ohm BNC Female Coaxial Connectors

Power Requirements: 13.8VDC, 300mA (power supply not included)

Dimensions: 7.87 x 1.97 x 7.87in. (200 x 50 x 200mm)

Weight: 1.76lbs. (800g)

Electrical:

Gain for Each Output: 0 or -15 dB (with attenuator)

PTT Input Isolation: >60 dB at 12 MHz, >50 dB at 50 MHz

Input SWR:

• 9 kHz to 30 MHz: < 1.2

• 30 MHz to 50 MHz: < 1.5

• 50 MHz to 70 MHz: < 1.6