M2 Antennas HF Beam Antennas KT36XA

Write the First Review

Part Number: MSQ-KT36XA

Not Available

Yagi, Tri-Band, 20, 15, 10 m, 6 el., High Performance, Linear Loaded, 3kW, 32 ft. x 3 in. Boom, 93 lbs., Each
See More Specifications

M2 Antennas HF Beam Antennas KT36XA

M2 Antennas HF Beam Antennas KT36XA

MSQ-KT36XA

Not Yet Reviewed

Part Number: MSQ-KT36XA

Not Available

Overview

Brand:
Manufacturer's Part Number:
KT36XA
Part Type:
Product Line:
DXE Part Number:
MSQ-KT36XA
Item Number:
2248509
HF Beam Antenna Type:
Yagi
HF Beam Antenna Band Coverage:
20, 15, 10 meters
HF Beam Antenna Elements:
6
HF Beam Element Material:
Aluminum tubing
Antenna Power Rating:
3,000 W
Beam Antenna Boom Length:
32.00 ft.
HF Beam Antenna Boom Diameter (in.):
3.000 in.
HF Beam Antenna Longest Element:
25.00 ft.
Beam Antenna Turning Radius:
21.50 ft.
Effective Moment (approximate):
2,000 ft. lbs.
Mast Mounting Clamp Minimum:
2.000 in.
Mast Mounting Clamp Maximum:
2.000 in.
Wind Surface Area:
9.750 sq. ft.
Feedpoint Impedance:
50 ohm
Antenna Feedline Connection Type:
UHF female, SO-239
Antenna Weight:
93.00 lbs.
Quantity:
Sold individually.
Notes:
SO-239 connector on supplied M2 balun.

M2 Antennas HF Beam Antennas

M2 Antennas KT36XA Tri-banders are the hottest performing HF tri-band beam antennas on the market!

M2 Antennas KT36XA beams are known throughout the industry to provide amazing HF operations on the 20, 15 and 10 meter bands. The result of many man-hours perfecting the original KLM KT-34XA through computer optimization, the M2 KT36XA beams' exemplary performance ratings were confirmed by range testing, as well as in actual on-air tests. If you have heard one on the air, you know!

KT36XA HF tri-banders utilize five elements on 20 and 15 meters, with a sixth element boosting performance on 10 meters! Enjoy broad gain and front-to-back curves across all three bands. The KT36XAs' high efficiency, linear loaded design with large conductors is built on a 32 ft. boom. It produces these full performance tri-band beams with shorter elements for a tight 21.5 ft. turning radius and a wind load of only 9.75 sq. ft.

The KT36XAs' dual driven element, log cell feedpoint system creates a rig-pleasing, flat SWR match. An included 3 kW 4:1 balun efficiently matches the antennas to your 50 ohm feedline.

Now all KT36XA hardware has been upgraded, including M2's new, machined shorting bars and rugged center element mounts. The strongest tri-bander on the market, constructed to survive 100 mph winds, these great antennas will give you many years of top-notch service for your HF DXing and competitive operations.

When you have decided that you will accept nothing less than the absolute best of the tri-band Yagis--the M2 Antennas KT36XA HF tri-band beam antennas--then DX Engineering, an M2 Antennas stocking dealer, is your source for these legendary beam antennas. Order here!

Documentation

Instruction Sheets for Part Number MSQ-KT36XA

 Loading...

Reviews Write a Review

Some parts are not legal for use in California or other states with similar laws / regulations

Modal Header

Call To Order

This is a custom order part. You can order this part by Contacting Us.

CA Warning Icon

Cancer and Reproductive Harm -- www.P65Warnings.ca.gov

Email this page