Overview

Palstar AT2K 2000 Watt Antenna Tuners

Palstar AT2K 2000 Watt Antenna Tuners are the upgrade to the classic AT1500CV tuner, featuring a newly designed, smaller roller inductor, which allows the AT2K to tune 6 Meters. Newly designed capacitors with lower minimum capacitance improve high band performance, while maximum capacitance has been increased to 400pF for better low band performance.

The AT2K features a 6 position antenna selector switch. In addition, the Peak/Peak Hold metering from the PM2000A has been incorporated into the AT2K. Forward power metering is in two ranges, 300 and 3,000 watts. Standing Wave Ratio measurements are displayed with this illuminated cross-needle meter. SWR is read directly from the meter face where the Forward and Reverse needles cross.

The AT2K matches dipoles, center fed doublets, Verticals, end-fed wire, delta loops, beams, Windoms, Inverted Vees, and many more antenna types.

With a chassis made of 11 ga. (.090 in. thick), iridite-treated aluminum, and a durable powdercoated finish on the front panel and top cover, you can have a tuner that will grace your shack for years to come.

One eHam.net user wrote about the AT2K, "This is a tuner for life, buy one and you will not be disappointed."

Palstar AT2K tuners feature:
--Impedance range 20 to 1,500 ohms from 160 to 6 meters (assuming resistive load)
--Low minimum custom variable capacitors, 15pF to 400pF at 4.5 kV
--26 uH 5 kV ceramic body roller inductor with turns counter
--Silver plated inductor wheel shaft and contact wheel

Note: For additional information, please look at the files under the "Documentation" tab.

Palstar AT2K 2000 Watt Antenna Tuners are destined to become a ham favorite from DX Engineering!

Documentation