Availability
EAntenna Systems
EAntenna offers a strong line of HF, VHF, and UHF antennas that were originally designed in Spain and are now manufactured by WiMo Antenna and Electronics, Germany’s...
EAntenna offers a strong line of HF, VHF, and UHF antennas that were originally designed in Spain and are now manufactured by WiMo Antenna and Electronics, Germany’s largest supplier of amateur radio products. EAntenna offers high quality products including Yagi, log periodic, rotatable dipole and vertical antennas. Advanced, cutting-edge computer modeling optimization techniques with robust electrical and mechanical designs produce exceptional performance and fantastic value in each of their offerings. From mono-band and multi-band beams to the original low-noise Loop Fed Arrays and Optimized Wideband Arrays, and...
EAntenna offers a strong line of HF, VHF, and UHF antennas that were originally designed in Spain and are now manufactured by WiMo Antenna and Electronics, Germany’s largest supplier of amateur radio products. EAntenna offers high quality products including Yagi, log periodic, rotatable dipole and vertical antennas. Advanced, cutting-edge computer modeling optimization techniques with robust electrical and mechanical designs produce exceptional performance and fantastic value in each of their offerings. From mono-band and multi-band beams to the original low-noise Loop Fed Arrays and Optimized Wideband Arrays, and so many more, EAntenna products are offered exclusively in North America by DX Engineering. Plus we can ship these great antennas internationally!
EAntenna HEX6B Six Band Hexbeam Antenna
EAntenna HEX6B Six Band Hexbeam is a directional HF antenna for the six Amateur bands 20, 17, 15, 12, 10 and 6 meters. This design follows the ideas of G3TXQ Steve Hunt, the originator of the Broadband version of the Hex Beam antenna. However, this mechanical construction is a version refined by EAntenna with their long-standing antenna engineering experience. The result is an efficient, lightweight portable antenna for the high HF DX bands, which is ideal for use for DXpeditions and vacations. An installation at 20 ft. above the ground can work quite well, but a tower-mounted Hexbeam at a height of 35 to 60 ft. is known to perform as intended and produce excellent DX results. The HEX6B works as two element beam on each band. Ready-to-use wires and ropes are attached to the fiberglass struts and due to the mechanical tension of the struts, the beam is stretched to its fixed size all the time, so there is no sag on the wires. The radiator dipoles are connected to the vertical center support, with each band wire element attaching with screw clamps. The center support is designed as a coaxial transformer and balun, providing a particularly good match on each band, with one feedline for all six bands. The HEX6B forward gain is approximately 3dBD or better, the front/back ratio is between 13 and 22dB. SWR is 1.5:1 or better on all bands except 10m, where SWR is 2:1 or better. Each band can be used in full bandwidth without a tuner. The maximum allowed power is 5 kW. The fiberglass tubes are double coated against UV radiation. The setup of the HEX6B six band beam is simple and can be done by one person in about 30 minutes. All ropes and wires are ready, cut to length, so no tuning is required. Due to the low weight of only 18.7 lbs. (8.2 kg) this hex beam can be installed on a light aluminum push-up mast. Rotation is either done with a small rotator or by hand. The HEX6B mast clamp accommodates poles with a Diameter from 1.10 -2.05 in. (28-52mm).
( 6 )
$851.99
EAntenna HF Rotatable Antennas
EAntenna HF Rotatable Antennas include a comprehensive range of mono-band and multi-band Yagi beams and rotatable Delta Loops and Dipoles. Find the band coverage and performance antenna of your dreams right here. For example, the exciting EAntenna 59+ provides great performance on 20, 17, 15, 12 and 10 meters! Check out the specs on this great line of HF directional antennas. DX Engineering offers EAntenna because their attention to manufacturing detail is excellent! Their Yagi, log periodic, and rotatable dipole antennas are built with high-quality stainless steel hardware and aircraft-grade aluminum. As you look through these selections, be aware that advanced, cutting-edge computer modeling and optimization techniques were used to produce every one of the EAntenna premier HF beam antennas and state-of-the-art VHF and UHF Yagi antennas. Their mechanical designs are very robust in every way, as most are rated for at least 100 mph wind survival. To see additional information about each antenna, click on the "More Details" link on the antenna of interest. Then click the Specifications tab to see all of the physical and electrical characteristics of that antenna. EAntenna products are offered exclusively in North America by DX Engineering. Plus, we can ship these great antennas internationally! When you're making plans for a new antenna at your station, look no further for the outstanding solutions by EAntenna, "The Best Choice for Your Antenna System!" NOTE: Manuals are normally supplied bilingual. If your manual lacks an English section, contact DX Engineering for an English version.
( 47 )
$355.99
—
$2,215.99
EAntenna DUOSAT Handheld Antenna
The EAntenna DUOSAT Handheld Antenna is a portable, dual-band antenna solution for the field. Constructed of T5 6061/6082 aluminum, stainless steel hardware, and hand-finished, this high-quality antenna provides low interference operation for your 2 meter and 70 centimeter bands. General specifications: * 3 LFA elements for VHF operation * 5 LFA elements for UHF operation * 50 ohm coaxial output * Lightweight aluminum: 22 oz. Duplexer is not included. Add the EAntenna DUOSAT Handheld Antenna to your collection today from DX Engineering!
( 1 )
$201.99
EAntenna VHF and UHF Directional Antennas
EAntenna VHF and UHF Directional Antennas include exciting new offerings for the 50, 144 and 430 MHz bands. Weak-signal enthusiasts will enjoy using these high quality beams with superior specs for SSB, CW, digital and satellite. Here are the original low-noise Loop Fed Array mono-band beams or Optimized Wideband Arrays for VHF and UHF. Plus there are super specialized 2 meter or 70 cm Cross Polarized Yagis and the compact EAntenna 6 meter Moxon antenna that has only a 3 ft. boom! NOTE: The dual-band beams for 2 meters and 70 cm designed by DK7ZB cover 144 to 146 MHz and 420 to 440 MHz, which is the entire band in Europe. In the USA they are suitable for use on SSB, CW, digital and satellite as a horizontally polarized antenna. They will NOT function for the American FM Simplex and Repeater band sections of 146 - 148 MHz and 440 -450 MHz. DX Engineering recommends antennas manufactured by EAntenna because their attention to detail is meticulous! These Yagi, log periodic and rotatable dipole antennas are built with only the highest quality stainless steel hardware and aircraft grade aluminum. As you look through their selections, be aware that advanced, cutting-edge computer modeling and optimization techniques were used to produce EAntenna premier HF beams and state-of-the-art VHF and UHF antennas. Their mechanical designs are very robust in every way, as most are rated for at least 100 MPH wind survival. To see additional information about each antenna, click on the "More Details" link on the antenna of interest. Then click the Specifications tab to see all of the physical and electrical characteristics of that antenna. EAntenna products are offered exclusively in North America by DX Engineering. Plus we can ship internationally! When you are making plans for a new antenna at your station, plan to look right here for the outstanding solutions by EAntenna, "The Best Choice for Your Antenna System!" NOTE: Manuals are normally supplied bilingual. If your manual lacks an English section, contact DX Engineering for an English version. IMPORTANT: EAntenna VHF and UHF Loop Fed Antennas are intended to be mounted horizontally for SSB and CW operation which is at the lower frequency end of the bands, NOT on FM. For example, the 2 meter LFA should be mounted horizontally and is tuned for use on 144-146 MHz and is not intended for FM use on 146-148 MHz. Additionally, the DK7ZB design EAntenna dual-band beams for 2 meters and 70 cm cover only 144-146 MHz and 420-440 MHz, the same European frequency range, and so they are not suitable for FM use in North America. EAntenna Cross Polarized LFA beams have both horizontal and vertical elements with only 144.0 - 144.5 MHz coverage designed specifically for EME or satellite enthusiasts.
( 60 )
$129.99
—
$1,499.99
EAntenna Multi-Band Dipole Wire Antennas
EAntenna Multi-Band Dipole Wire Antennas come in single wire and parallel-wire types. Those with multiple wire elements come with special spacers to keep the dipole elements separated. All are supplied with 1.5 kW PEP balun with SO-239 coax connector. A variety of models are available including 80, 40 20, 15 and 10 meters, or 40, 20, 15 and 10 meters, a 20, 15 and 10 meter model, a two-band model for 80 and 40 meters and a special 30, 17, 12 and 6 meter model. They are made with top quality components to offer long service and excellent operational results. Featuring high strength polycarbonate insulators, you can depend on excellent multi-band operations with EAntenna Multi-Band Dipole Antennas. NOTE: Manuals are normally supplied in Spanish and English. If your manual doesn't have an English section, please contact DX Engineering for an English version.
( 34 )
$289.99
—
$349.99
EAntenna Equipment Covers
Although we may not like it, we can't be in the shack all the time. When you shut down your station, make sure that it stays dust free. EAntenna Equipment Covers will keep them clean and ready for power-up! These equipment covers include openings on the back to allow covers to protect without having to disconnect any cables. EAntenna Equipment Covers are sewn blue polyester and cotton fabric that is soft, opaque and manufactured to fit and protect your equipment. Whether your equipment is a few hundred dollar investment or many thousands, protect that investment with EAntenna Equipment Covers from DX Engineering. Note:These covers are custom-fitted for the item listed only. Any additional or compatible accessories will remain uncovered.
( 45 )
$35.24
—
$49.99
EAntenna EA6J 6-Meter Vertical Antennas
EAntenna EA6J 6-Meter Vertical Antennas are classic J-Pole antennas as were designed by the German military for World War II. After the war, J-Pole antennas became very popular worldwide, as VHF and UHF operations became more common. They were even offered as commercial antennas for police and fire department use. These antennas are assembled with tubing sections that are 35, 30 and 25mm in diameter. Diameters this large achieve an impressive 2-MHz bandwidth at 50 MHz and create a very strong vertical radiator. A heavy mounting plate and stainless mast clamps provide robust support. Rated at 6 dBi gain and capable of handling 2 kW of RF, these J-Pole antennas deliver exceptional omni-directional performance at value pricing. Get on 6-meters the easy, low-cost way with EAntenna EA6J 6-Meter Vertical Antennas from DX Engineering.
( 19 )
$319.99
EAntenna Sloper Antennas
The EAntenna Slopers are shortened with a coil to reduce the antenna length, but behave like quarter-wave sloper antennas. Like any Sloper antenna, it is directional with a low angle for excellent long range DX results. Directivity is away from the supporting metal mast or tower, toward the lower end of the sloper. If a non-metallic vertical support is used for the sloper, an additional vertical wire counterpoise is required. The antenna wire is 2mm (approx. 12 AWG) with UV-resistant insulation for durability. This antenna does not include a balun, but use with a feedline choke, line isolator, or coax bead choke is recommended to achieve the desired results. These antennas are rated for 2 kW CW. The EAntenna EASLP160S achieves a considerable 2:1 SWR bandwidth of 75 kHz. The EAntenna EASLP80S achieves a respectable 2:1 SWR bandwidth of 210 kHz. The assembly and deployment of this antenna is simple. The feedpoint of the antenna is attached to the mast or tower at the minimum height listed below, or higher, if possible, for better results. If supported by a tree, this antenna requires a grounded vertical wire counterpoise, in addition to the coax feedline. With antenna support rope, extend the insulated end to a support a minimum of 10 ft. above the ground. This antenna is preset to the bottom of the band. Adjust to higher frequencies within the band with 5 cm (2 in.) cuts for gradual changes while using an antenna analyzer. In just 5 minutes you can prune the antenna to cover the desired portion of the band. Physical Characteristics of the EAntenna Slopers: * EASLP160 Total Length: 17.7m (58.0 ft.); Minimum Height: 12.7m (41.6 ft.) * EASLP80 Total Length: 11.0m (36.0 ft.); Minimum Height: 8.0m (26.2 ft.)
( 2 )
$122.99
—
$161.99
EAntenna Replacement Baluns
Need to get your Delta antenna back online? EAntenna's Replacement Baluns are your answer. They're manufactured from the same quality materials to the same specifications as the original. Direct replacements for specific models and variations are available; please confirm application before ordering. Restore your antenna to full capacity with EAntenna's Replacement Baluns!
Not Yet Reviewed
$85.99
—
$164.99
EAntennas 11m LFA Yagi Antennas
EAntenna 11m LFA Yagi Antennas are 4 element loop fed Yagi Antennas. These directional antennas are compact and feature an impressive 21.3 dB of Front to Back Ratio and 9.1dBi of gain. The included balun allows this antenna to handle up to 3kW of power. The 1.57 x 1.57 in. square boom is 17.06 ft. in length and the antenna mounts to the mast at the center of the boom. Weighing 24.46 pounds, a small rotator can turn the antenna. The maximum windspeed that the antenna can withstand is 99.4 Mph.
Not Yet Reviewed
$695.99
Clearance
EAntenna Single Band Dipole
The EAntenna EA60JR Dipole is designed as a mono-band antenna for 60 meter, which also functions on the 15 meter band. It has an overall length of 16 meters (52.5 ft.) when installed as an Inverted-V; and a bandwidth over 100 kHz of 60 meters and over 500 KHz on 15 meters with a minimum SWR of 1.1:1 at 5330 kHz when installed at 10 meters (33 ft.) above ground. Maximum power is 1.5 kW continuous. Adjust the EAntenna EA60JR Dipole antenna resonance by 50 kHz with a 5 cm (2 in.) cut on each end of the dipole. All our antennas are computer designed and optimized, based on NEC2 and NEC4 engine. Each model is tested for reliability before it is marketed, to ensure optimum antenna performance for each customer installation. Antennas are measured to the millimeter with precision equipment. Baluns are manufactured in aeronautical-grade 6082 T5 aluminum. The Amphenol SO-239 UHF female connector is manufactured with the best materials, including ceramic dielectric for high power handling. The dipole antennas feature the best HF wire available, Flex Weave, 2mm 2 (AWG 14), terminated to a polyamide insulator capable of use within the extreme temperature range (-90 degrees to +70 ° degrees C). EAntenna are hand-made by qualified personnel for a final product of extreme quality. The advantages of EAntenna dipoles are: * Broad bandwidth compared to other brands * Very flexible wire, excellent for permanent and portable operation without deterioration * Non-directional (like an inverted V) * Great for DX! All this makes the installed EAntenna, your final antenna. A description of assembly is available inside the package, and answers to questions are available before the purchase directly from the manufacturer by email (ea7jx@eantenna.es). Excellent after-sales service and timely assistance are offered by email, as well.
( 1 )
$149.99
$112.49
EAntenna EA80DXS Short Dipole Wire Antennas
EAntenna EA80DXS is a Short Dipole, 65.5 ft. in length, designed for coverage of the lower portion of the 80 meter band, 3.5 to 3.8 MHz only. This rugged antenna features a good bandwidth of 120 kHz under 2:1 SWR. Actual desired frequency range depends upon on-site tuning by length adjustment. Loading coils are made with enameled copper 15 AWG equivalent (1.65 sq. mm) wire and high UV resistance insulated 12 AWG equivalent (2.0 sq. mm) antenna wire. This antenna includes an EAntenna 1:1 Balun, rated up to 1.5 kW, which has a SO-239 (UHF female), and the antenna has a total weight of 3.3 lbs. (1.5 kg). Ideal for limited-space operations on 80 meters, this dipole may be mounted horizontal or as an Inverted Vee.
( 2 )
$319.99
EAntenna VU-LFA23 Dualband Antenna
The EAntenna VU-LFA23 Dualband Antenna is the first of its kind. Traditional cross-polarized Yagi antennas are normally offset 90 degrees. However, EAntenna's VU-LFA23 antenna is offset 45 degrees to reduce cross-polarization attenuation. That results in attenuation levels equal to or below 3dB! This antenna also works with independent feeds to optimize incoming signals. General specifications: * Receive CW, SSB, and FM signals without having to change polarity * Hand-built from high-quality T5 6061/6082 aluminum and stainless steel hardware * Accepts masts up to 2.05 in. (52mm) * Square booms increase lateral load handling and resist wind loading Increase your reception across both bands with one antenna---with EAntenna's VU-LFA23 Dualband Antenna from DX Engineering!
( 1 )
$449.99