Availability
Bushcomm Wire Antennas and Parts
Bushcomm BBA-1KD Kilowatt Multi-Wire Broadband Antennas
Bushcomm BBA-1KD Kilowatt Multi-Wire Broadband Antennas are in Bushcomm's flagship antenna group (BBA Series) and are all-round best performers. These antennas are highly efficient and engineered to meet the exacting standards of professional and commercial users. BBA-1KD 80 through 10 meter dipoles are significantly more compact than their 160 meter counterparts. Bushcomm BBA Series antennas have the flexibility to suit a wide range of installation situations - between two purpose built towers, in an inverted "V" configuration or even between a tower and the shed out back. All BBA Series antennas include a purpose-designed balun. BBA-1KD specifications: * Frequency Range 3.5 - 30MHz * Nominal Input Impedance 50 Ohm * VSWR (typical) Better than 2:1 * Gain (height dependent) 5dBi (typical) -4dBi at 3.5MHz (height dependent) * Power Rating 1,000 Watts continuous 1.5 kW PEP (voice) * 1kW digital ready * Input connector UHF Type socket (SO-239) * Operating Temperature -22 degrees F to 122 degrees F * Storage Temperature -40 degrees F to 185 degrees F * Antenna Weight: approximately 11.0 lbs. * Antenna Length: 85.58 ft. * Radiating elements 0.079 in. (14AWG) Stainless Steel (304) * Wind rating 130mph (horizontal) * Ice loading 0.25 in., (with reduced wind rating) * Mast Spacing 95 ft. horizontal tower spacing; 65.6 ft. footprint inverted V Note: When the "Documentation" tab is available, please look at the associated files for additional product information. The highest quality materials are used in construction of these antennas including stainless steel wire and fittings and UV resistant fiberglass rods. Quality materials and excellent design produces an antenna that will survive the rigors of the outdoors for many years. For a broadband 80-10 meter dipole, remember these Bushcomm BBA-1KD Kilowatt Multi-Wire Broadband Antennas from DX Engineering.
( 1 )
$2,089.99
Bushcomm BBA-1KDE Kilowatt Multi-Wire Broadband Antennas
Bushcomm BBA-1KDE Kilowatt Multi-Wire Broadband Antennas are in their flagship antenna group (BBA Series) and are all-round best performers. These antennas are highly efficient and engineered to meet the exacting standards of professional users. Bushcomm BBA Series Antennas have the flexibility to suit a wide range of installation situations - between two purpose built towers, in an inverted "V" configuration or even between a tower and the shed out back. All BBA Series antennas include a purpose-designed balun. BBA-1KDE specifications: * Frequency Range 1.6 - 30MHz * Nominal Input Impedance 50 Ohm * VSWR (typical) Better than 2:1 (with 30m RG-213) * Gain (height dependent) 5dBi (typical) -5dBi at 1.8MHz (typical, 130 ft. height) * Power Rating 1,000 Watts continuous 1.5 kW PEP (voice) * Input connector UHF Type socket (SO-239) * Operating Temperature -22 degrees F to 122 degrees F * Storage Temperature -40 degrees F to 185 degrees F * Shipping 57 x 15.7 x 8.7 in., approximately 35 lbs. * Antenna Length 177 ft. * Radiating elements 0.079 in. (14AWG) Stainless Steel (304) * Wind rating 130mph (horizontal) * Ice loading 0.25 in., (with reduced wind rating) * Mast Spacing 183 ft. horizontal tower spacing; 131 ft. footprint inverted V Note: When the "Documentation" tab is available, please look at the associated files for additional product information. The highest quality materials are used in construction of these antennas including stainless steel wire and fittings and UV resistant fiberglass rods. Quality materials and excellent design produces an antenna that will survive the rigors of the outdoors for many years. For an ultimate broadband dipole, remember these Bushcomm BBA-1KDE Kilowatt Multi-Wire Broadband Antennas from DX Engineering.
Not Yet Reviewed
$2,610.99
Bushcomm FD-600 Wideband Folded Dipoles
These Bushcomm FD-600 Wideband Folded Dipoles are compact, two-wire folded dipole alternatives to our best-selling model; the BBA-100 three-wire broad-band antenna. The FD-600 Folded Dipole covers the frequency range of 2-30 MHz, and has a rated power input of 600 watts PEP. Best of all, as with the majority of our antennas, no tuner is required. The Folded Dipole is a multi-wire antenna that is relatively lightweight. By having only two stainless steel wires compared to the BBA-100's three wires, it also has less wind loading! These antennas sport an SWR of better than 2.5:1 (typically 1.5-1.6:1) from 2 to 30 MHz! Special Features of the FD-600: * No Tuner Required * UV Resistant Spacer Rods * UV Resistant Balun/Load Boxes * Stainless Steel Wire & Fittings Electrical Characteristics: * Frequency Range: 2-30MHz * Input Impedance: 50 Ohms * Power Input: 600W PEP (voice) / 250W Continuous and Data Modes * Input Connector: SO-239 UHF-type connection Mechanical Characteristics: * Shipping Weight: 5kg, (11 lbs.) * Antenna Length: 27m, (88.58 ft.) * Mast Spacing: 29m (95.15 ft.) Horizontal configuration * 18m (59 ft.) footprint inverted "V" (with a 10m (32.80 ft.) high feed point) * Built to withstand the rigors of the world's harshest environments Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Folded dipoles have existed since nearly the beginning of Amateur Radio. Broadband versions are fairly new. Take advantage of the extreme durability of these stainless-steel beauties to cover the all of ham bands and SWL shortwave frequencies. Order Bushcomm FD-600 Wideband Folded Dipoles from DX Engineering!
( 2 )
$899.99
Bushcomm FD-100 Broadband Folded Dipole Antennas
Bushcomm FD-100 Broadband Folded Dipole Antennas are compact folded dipole alternatives to their best-selling model, the BBA-100 three-wire broad-band antenna. FD-100 Folded Dipoles not only cover the same frequency range as the BBA-100, it has the same overall length and the same power input of 125W PEP. Best of all, as with the majority of Bushcomm antennas, no tuner is required. These folded dipoles are multi-wire but relatively light in weight. By having only two stainless steel wires compared to the BBA-100's three wires, they also have less wind loading and an SWR of better than 2.5 (typically 1.5-1.6). Don't think that just because this is a less expensive antenna that it means quality or performance has been compromised in any way. It's still built to withstand the rigors of the world's harshest environments. FD-100 specifications: * Frequency Range: 2-30 MHz * Input Impedance: 50 Ohms * Power Input: 125w PEP (voice) for 2-30MHz * Input Connector: UHF-type socket * Antenna Length: 88.5 ft. * Mast Spacing: 105 ft. Horizontal configuration * 59 ft. inverted "V" configuration (with a 33 ft. tower) * Shipping Weight: 6.6 lbs. Special features: * No Tuner required * UV resistant spacer rods * UV resistant balun/load boxes * Stainless steel wire and fittings If you would like a broadband antenna for 80 through 10, then look at one of these Bushcomm FD-100 Broadband Folded Dipole Antennas from DX Engineering!
( 2 )
$581.99
Bushcomm HORIZON 2040 Center-Fed Dipoles
Bushcomm HORIZON 2040 Center-Fed Dipoles are designed to be durable in the extreme. They are also very economical over the long haul. These stainless steel and copper antennas are constructed for emergency, temporary or permanent installation in some of the world's most inhospitable environments and they are built using only the highest-quality materials. And at only 13 meters in length, they will easily fit into most installation scenarios. Commercial antennas are rated with a usable VSWR of 2:1 or under. Rating the Horizon 2040 using this method the resonant band width is appropriately 150 kHz at 40 meters, 300 kHz on the 20 meter band. In most cases this will be fine. But if you prefer wider band width or tighter SWR an on-board tuner or the addition of a good-quality external tuner will help. When manufactured the antennas are hand tuned at approximately 3m (10 feet) above ground. For this reason, when you install the antenna, the height above ground or proximity of trees buildings sheds and so on will affect your SWR. You may have to retune for your requirements. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Dipole antennas are tried and true since the very beginning of radio. Order Bushcomm HORIZON 2040 Center-Fed Dipoles from DX Engineering for your Go-Bag, RV, or the back yard!
( 1 )
$165.99
Bushcomm SWC-100 HF Broadband Center-Fed Dipole Antennas
Bushcomm SWC-100 HF Broadband Center-Fed Dipole Antennas are a commercial-grade, single-wire broadband dipole antenna engineered for base station or semi-portable applications. Covering a true broadband frequency range of 2.0–30 MHz without requiring an external tuner, it delivers reliable performance in demanding environments. Built with stainless steel wire and a UV-resistant balun ensures long-term durability. Measuring 157.5 feet in length, the SWC-100 supports multiple installation configurations—horizontal, inverted-V, or sloper. For limited spaces, an inverted-V setup at a 32-foot mast height reduces the footprint to approximately 141 feet. Rated for 130W PEP and 50W continuous power, it features a 50-ohm impedance and UHF-type (SO-239) connector. Weighing just 4.4 pounds, the SWC-100 is lightweight and easy to install.
Not Yet Reviewed
$459.99
Bushcomm Three-Band End-Fed Antennas
Bushcomm Three-Band End-Fed Antennas are designed and manufactured in Australia and are intended to offer simple and very efficient operation on the 40, 20 and 10 meter bands. Constructed for emergency, temporary or permanent installation in some of the world's most inhospitable environments, they are built using only the highest-quality materials. At only 12 meters in length, they will easily fit into most installation scenarios. Commercial antennas are rated with a usable VSWR of 2:1 or under. Rating the Horizon End-Fed using this method the resonant band width is appropriately 100 kHz at 40 meters, 300 kHz at 20 meters and 400 kHz on the 10 meter band. In most cases this will be fine. But if you prefer wider band width or tighter SWR an on-board tuner or the addition of a good-quality external tuner will help. These antennas use the grey balun box as their feed point and termination point for one end of the antenna. This end can be a tower, pole, side of the house, tree etc. Simply stretch the main radiating element outwards and pull it tight with your support rope. As the wire is G304 stainless steel, it may be pulled quite tight and will not stretch. This antenna is ground independent so grounding or radials are not required. When manufactured the antennas are hand tuned at approximately 3m (10 feet) above ground. For this reason when you install the antenna the height above ground or proximity of trees buildings sheds and so on will affect VSWR. You may have to retune for your requirements. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. End-fed antennas are gaining popularity. Order Bushcomm Three-Band End-Fed Antennas from DX Engineering for your Go-Bag, RV, or the back yard!
( 5 )
$215.99
Bushcomm SWC Series Broadband Dipole Antennas
Bushcomm SWC Series Broadband Dipole Antennas are available for continuous coverage of the 80 through 10 meter bands. They are designed in two lengths to cover either 2.0 to 30 MHz or 5 to 30 MHz without the use of an antenna tuner. All Bushcomm SWC Series products feature: * Made of 316 marine grade stranded stainless-steel antenna wires * 316 stainless-steel hardware * Balun/load feed point is UV stabilized * Integrated strain reliefs and center support * No ATU required across entire coverage range Note: When the "Documentation" tab is available, please look at the associated files for additional product information. Use the SWC-100C/SWC-100CE for 80 through 10 or the shorter SWC-100S for 60 through 10 meters. When searching for high quality broadband dipoles, don't overlook Bushcomm SWC Series Broadband Dipole Antennas from DX Engineering!
( 2 )
$422.99
—
$655.99
Bushcomm PTS Pigtail Strain Relief Cable Supports
Bushcomm PTS Pigtail Strain Relief Cable Supports are a rugged and practical solution designed for Bushcomm multiwire and single-wire HF antennas. Engineered to suit larger coaxial cables such as RG-213, PTS attaches securely to the balun and provides a coiled "pig tail" channel to wrap the cable, preventing stress on the connector and maintaining a reliable RF connection. Ideal for permanent installations or field setups, the PTS ensures that heavy coax cables remain supported and protected, reducing wear and tear on your antenna system while enhancing long-term performance.
Not Yet Reviewed
$89.99
Bushcomm SWE Series Broadband End-Fed Antennas
Bushcomm SWE Series Broadband End-Fed Antennas are single-wire HF broadband antennas designed for either permanent or quick-deployment occasional use. They have a frequency range of 3.5-30MHz without the need for a tuner. The easy to erect SWE-100 is an efficient broadband antenna. One side of the balun goes to ground and the other is elevated above the earth. SWE antennas are available in two combinations: 1. The bare SWE-100 antenna only, perfect for a permanent installation. 2. The SWE-100K is an SWE-100 antenna supplied with a Quick Deployment Kit that includes accessories for use while travelling or for temporary installation. 3. The SWE-100P includes "soft stainless" wire that is 49-strand versus the 7-strand wire used in other versions. In addition to the Quick Deployment Kit, the SWE-100P also includes a hand winder for more convenient portable use. The Quick Deployment Kit includes 5m RG58 Coax cable, a stainless steel ground stake, 10 meters of nylon cord with a throw weight on one end, an alligator clip grounding clamp, a 20cm long Velcro wrapping strap, two nylon snap hooks and a laminated instruction sheet all in a rugged carry bag. SWE Series specifications: Frequency Range 3.5-30MHz Power Rating: 125W PEP, 60W continuous Length: 88.5 ft. total length; 78.7 ft. antenna plus 9.8 ft. ground. Packed weight: SWE-100: 1.8 lbs., SWE-100K: 2.9 lbs., SWE-100P: 4 lbs. Here's a great solution for HF EmComm work! Bushcomm's SWE-100K offers a simple broadband answer for all-band HF operations. Order Bushcomm SWE Series Broadband End-Fed Antennas from DX Engineering and enjoy permanent, temporary or portable operations.
( 1 )
$555.99
Bushcomm BBA-100DXE Multi-Wire Broadband Dipole Antennas
When we think of Australia, many of us think of The Outback… that expansive and desolate area that is still open wilderness. If you have the kind of space available there, you will have no problem erecting a very-long wire antenna system. Here in North America, so many of us live on a 70 by 120 ft. lot, dictated by urban development, that the longer antennas are problematic at best. To meet the need for a wideband dipole that would fit many customers' lots having no room for a full-size 80 meter antenna 132 feet long, Bushcomm of Australia and DX Engineering offer a solution that is elegant, very high quality, and offers a wideband multi-wire 80 through 10 meter antenna of smaller physical size. BBA-100DXE Multi-Wire Broadband Dipole Antennas are highly efficient and engineered to provide tuner-free operation on all bands 80 through 10 meters. This Bushcomm antenna model is a DX Engineering exclusive offered ONLY through DX Engineering! Just note the "DXE" in the part number! Bushcomm BBA-100DXE antennas offer the flexibility to suit a wide range of installation situations - between a tower and mast, in an inverted "V" configuration, or even between a tree and the shed out back. BBA-100DXE antennas make "fitting it in the available space" just a bit easier. And all BBA Series antennas include a purpose-designed balun. Light yet sturdy construction ensures low total mass and minimal wind loading. Only the highest quality materials are used throughout; such as stainless steel wire and fittings and UV resistant fiberglass rods. All wire assembly is completed, including crimped wire loops. Quality materials and assembly produce an antenna that will survive the rigors of the outdoors for many years to come. And don't be afraid to push the 130 Watt continuous power limit. These antennas are built robustly and are fully Digital Modes and RTTY ready! Although more compact than other BBA Series antennas, these 80 through 10 meter dipoles will fit within smaller property boundaries and still yield exceptional performance. Electrical characteristics: * Frequency Range 3.5 to 30MHz, continuous coverage * Power Rating: 130W CW, data, RTTY; 250W PEP voice * Nominal Input Impedance 50 Ohm * Wideband VSWR (typical, no tuner necessary) better than 2:1 * Input connector: UHF Female (SO-239) * Operationally equal to Bushcomm's BBA-100C Mechanical characteristics: * Molded weatherproof balun included * Three parallel wideband radiating elements of 2mm Stainless Steel (G304) * Antenna Length 27 meters (88.5 ft.) * Footprint in inverted "V" configuration 20 meters or 66.62 ft. * Wind Rating 210 km/hr. (130 mph) * Ice loading 0.6 cm (0.25 in.), with reduced wind loading * Operating Temperature -30 degrees C to 50 C (-22 to 122 F) * Storage Temperature -40 degrees C to 85 C (-40 to 185 F) * Shipping Weight: Approximately 4kg (8.8 lbs.) Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. These dipoles are of three-wire parallel construction. The parallel radiators work together to increase the apparent electrical diameter of the antenna. Although they visually harken back to the days of Marconi and the great Gilded Age Ocean Liners, they are modern in every way. For an ultimate broadband dipole, remember these Bushcomm BBA-100DXE Multi-Wire Broadband Dipole Antennas, exclusively from DX Engineering!
( 2 )
$948.99
Bushcomm Delta Diamond 60 HF Wire Loop Antennas
Bushcomm Delta Diamond 60 HF Wire Loop Antennas are big wire antennas for small spaces. They are about 200 ft. in length, so they will fit into a 50 by 50 ft. perimeter space. They may also be deployed in other shapes to fit many different lot sizes. Description: * The Delta Diamond 60 is a 60-meter long (197 ft.) broadband perimeter loop HF antenna * True wideband HF design - No tuner required Package Contents Overview: * 60m long stainless-steel wire antenna, 2mm diameter wire * Four mounting insulators * Wire grips and 8mm nut driver supplied for final length adjustment * Includes a matching broadband balun and load set, to suit 2-30MHz Product Notes: * Made from 2mm 304 grade stainless steel cable and UV stabilized Nylon components * Supplied to be erected as a 4, 5 or 6-sided polygon. Users can supply additional insulated mounting hardware to add additional sides to suit the installation site * Frequency Range: 2-30MHz * Input Impedance: 50 Ohms * Power Input: 125w PEP (voice) * Input Connector: SO-239 UHF-style socket * Shipping dimensions: 28 x 24 x 7cm * Weight: 1.7kg Installation: * These antennas may be installed in several shapes selected to suit location restrictions and desired direction * Suspension guys are not included. 6mm Polyester cord, or equivalent, is recommended * The ideal minimum antenna height is 3.5 meters, (about 12 ft.), for safety and performance Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. You may have never thought that you could have room for a full 80 through 10 meter antenna system. Here's your chance! Order Bushcomm Delta Diamond 60 HF Wire Loop Antennas from DX Engineering and get on the air!
( 2 )
$567.99
Bushcomm BBA-100CE Multi-Wire Broadband Dipole Antennas
Bushcomm BBA-100CE Multi-Wire Broadband Dipole Antennas are their flagship models and all-round best performers. These antennas are highly efficient and engineered to meet the exacting standards of professional users. Frequency range is specified according to useful gain (not only VSWR), and all components are validated for rated power. Bushcomm BBA Series Antennas have the flexibility to suit a wide range of installation situations--between two purpose built towers, in an inverted "V" configuration or even between a tree and the shed out back. All BBA Series antennas include a purpose-built balun. BBA-100CE specifications: * Frequency Range 1.8 - 30MHz * Nominal Input Impedance 50 Ohm * VSWR (typical) Better than 2.5:1 * Gain (height dependent) 5dBi (typical) -5dBi at 1.8MHz (typical, 130 ft. height) * Power Rating 130W continuous 250W PEP (voice) * Input connector UHF Type socket (SO-239) * Operating Temperature -22 degrees F to 122 degrees F * Storage Temperature -40 degrees F to 185 degrees F * Shipping 55 x 6.7 x 4 in., approximately 22 lbs. * Antenna Length 177 ft. * Radiating elements 0.079 in. (14AWG) Stainless Steel (304) * Wind rating 130mph (horizontal) * Ice loading 0.25 in., (with reduced wind rating) * Mast Spacing 190 ft. horizontal tower spacing; 131 ft. footprint inverted V Note: When the "Documentation" tab is available, please look at the associated files for additional product information. Light yet sturdy construction ensures low total mass and wind loading. The highest quality materials are used in construction, such as stainless steel wire and fittings, and UV resistant fiberglass rods, to produce an antenna that will survive the rigors of the outdoors for many years. For an ultimate broadband dipole, remember these Bushcomm BBA-100CE Multi-Wire Broadband Dipole Antennas from DX Engineering.
( 2 )
$1,231.99
Bushcomm BBA-600V Multi-Wire Broadband Dipole Antennas
Bushcomm BBA-600V Multi-Wire Broadband Dipole Antennas are their flagship models and all-around best performers. These antennas are highly efficient and engineered to meet the exacting standards of professional users. The frequency range is specified according to useful gain (not only VSWR), and all components are validated for rated power. Bushcomm BBA Series Antennas have the flexibility to suit a wide range of installation situations--between two purpose-built towers, in an inverted "V" configuration, or even between a tree and the shed outback. All BBA Series antennas include a purpose-built balun. Light yet sturdy construction ensures low total mass and wind loading. The highest quality materials are used in construction, such as stainless-steel wire and fittings, and UV resistant fiberglass rods, to produce an antenna that will survive the rigors of the outdoors for many years. BBA-600V Specifications: * Frequency Range 2.0 to 30 MHz * Nominal Input Impedance 50 Ohm * VSWR (typical) Better than 2.0:1 * Gain (height dependent) 5dBi (typical) -6dBi at 3.6MHz (typical, 65.62 ft. height) * Power Rating 250 watt Digital 600 watt PEP (voice) * Input connector UHF Type socket (SO-239) * Operating Temperature -22 degrees F to 122 degrees F * Storage Temperature -40 degrees F to 185 degrees F * Shipping Weight 8.818 lbs. * Antenna Length 88.58 ft. * Radiating elements 0.079 in. (14AWG) Stainless Steel (304) * UV-resistant Rod and Balun Boxes * Wind rating 130 mph (horizontal) * Ice loading 0.236 in., (with reduced wind rating) * Mast Spacing 95.14 ft. horizontal tower spacing; 65.61 ft. footprint inverted V Note: When the "Documentation" tab is available, please look at the associated files for additional product information. For an ultimate broadband dipole, remember these Bushcomm BBA-600 V Multi-Wire Broadband Dipole Antennas from DX Engineering.
Not Yet Reviewed
$1,329.99
Bushcomm BBA-600VE Multi-Wire Broadband Dipole Antennas
Bushcomm BBA-600VE Multi-Wire Broadband Dipole Antennas are in their flagship antenna group (BBA Series) and all-round best performers. These antennas are highly efficient and engineered to meet the exacting standards of professional users. Frequency range is specified according to useful gain (not only VSWR), and all components are validated for rated power. Bushcomm BBA Series Antennas have the flexibility to suit a wide range of installation situations - between two purpose built towers, in an inverted "V" configuration or even between a tree and the shed out back. All BBA Series antennas include a purpose-designed balun. BBA-600VE specifications: * Frequency Range 1.8 - 30MHz * Nominal Input Impedance 50 Ohm * VSWR (typical) Better than 2:1 * Gain (height dependent) 5dBi (typical) -6dBi at 1.8MHz (typical, 130 ft. height) * Power Rating 250W continuous 600W PEP (voice) * Input connector UHF Type socket (SO-239) * Operating Temperature -22 degrees F to 122 degrees F * Storage Temperature -40 degrees F to 185 degrees F * Shipping 55 x 6.7 x 4 in., approximately 17 lbs. * Antenna Length 177 ft. * Radiating elements 0.079 in. (14AWG) Stainless Steel (304) * Wind rating 130mph (horizontal) * Ice loading 0.25 in., (with reduced wind rating) * Mast Spacing 183 ft. horizontal tower spacing; 131 ft. footprint inverted V Note: When the "Documentation" tab is available, please look at the associated files for additional product information. Light yet sturdy construction ensures low total mass and wind loading. The highest quality materials are used in construction, such as stainless steel wire and fittings, and UV resistant fiberglass rods, to produce an antenna that will survive the rigors of the outdoors for many years. For an ultimate broadband dipole, remember these Bushcomm BBA-600VE Multi-Wire Broadband Dipole Antennas from DX Engineering.
Not Yet Reviewed
$1,612.99