Availability
CHAMELEON ANTENNA Antennas
Chameleon Antenna PRV Portable Resonant Vertical Antennas
Chameleon PRV Portable Resonant Vertical Antennas are lightweight and rugged antenna systems intended for extreme portable use, such as Parks On the Air (POTA), Summits On the Air (SOTA) and other outdoor operation where an efficient but highly portable antenna is required. In addition, it is perfect for RV, apartment or condominium use, where a small balcony or patio may impose space limitations. Adjusting the height of the Multi-Configuration Coil (MCC) and installing the appropriate number of counterpoise wires for the desired band allows for easy band selection, enabling operation on the 40-10 meter Amateur Radio bands without an external tuner. Operation on 6 and 2 meters requires further adjustments to the telescoping whip length, along with adjusting the Multi-Configuration Coil (MCC) and proper counterpoise selection. Available in 2 configurations to complement your operating style, the PRV-SOTA (Light Kit) and PRV-POTA (Heavy Kit), which contains all the components of the PRV-SOTA (Light Kit) with the addition of a Universal Clamp Mount and a set of two 12 inch Extender Rods to elevate the base of the antenna for improved performance. The PRV-SOTA and PRV-POTA are extremely modular antenna systems with the ability to use components and accessories from other popular Chameleon antennas such as the Modular Portable Antenna System (MPAS 2.0) and MPAS Lite antenna.
( 2 )
$569.00
—
$674.00
Chameleon Antenna URT1 Mounting Brackets
Chameleon Antenna URT1 Mounting Brackets provide a mounting solution for the Chameleon Antenna URT1 Remote Antenna when used portable with any of the MPAS Ready Antenna System Components. The kit contains a mounting bracket for the URT1, a stainless steel insulated mounting head, and a stainless steel mounting rod as well as stainless steel hardware. Electrical connection to the antenna is accomplished in one of two ways: direct feeding using the insulated mounting head or by coax feeding one of the feed coils such as the CHA-Blank-adapter or the Hybrid Mini. This mount makes the Chameleon Antenna URT1 a versatile addition to your portable antenna lineup. Note: The URT1 is sold separately.
Not Yet Reviewed
$115.00
CHAMELON ANTENNA CHA MPAS Lite Modular Portable Antenna Systems
CHAMELON ANTENNA CHA MPAS Lite is the little brother of the CHA MPAS 2.0. The Modular Portable Antenna System is a concept allowing the radio operator to configure and deploy the antenna system in a variety of configurations. Some of the possible deployment configurations include Vertical, Horizontal, Sloper, Inverted V, Inverted L, NVIS, Balcony, Vehicle (Stationary) and Backpack Portable. The MPAS Lite antenna system consists of: • 1 X CHA HYBRID-MICRO Feedpoint with SO-239 • 1 X 60 ft. Wire • 1 X SS17 (17' long collapsible stainless steel whip) • 1 X CHA SPIKE • 1 X CHA 50 ft. coax with RFI choke • Stainless Steel Hardware Longer antenna wires, counterpoise and carry bag are user supplied. The integral broadband impedance matching network transformer of the CHA HYBRID-MICRO allows broadband antenna tuning. These antennas will operate from 1.8 - 54 MHz, continuous, without any adjustment when using a wide range antenna tuner (the shortest configuration has limited performance below 3.5 MHz). Here are the CHA MPAS Lite details: Frequency: (all configurations require a wide range antenna tuner) * CHA HYBRID MICRO with 60 ft. wire and customer supplied counterpoise: 1.8 MHz through 54 MHz * CHA SS17 TELESCOPIC WHIP: 24-54 MHz (whip only) * CHA HYBRID MICRO, all configurations: 50 W (CW, AM, FM, RTTY), 100 W (SSB and SSB-based digital modes) RF Connection: * UHF Female on CHA HYBRID MICRO (SO-239) Use of SS17 WHIP is NOT RECOMMENDED for permanent installations.
( 9 )
$360.00
Chameleon Antenna CHA Hybrid MINI 130 Portable HF Antennas
Chameleon Antenna CHA Hybrid MINI 130 Portable HF Antennas are the most versatile, high performance and rugged portable HF antennas available and offer enhanced broadband tuning capabilities across the HF bands, including the MARS/CAP frequencies. The Hybrid MINI 5:1 impedance matching unit base is water resistant. This antenna system is most efficient when elevated at a reasonable height and can be supported by trees, masts, or any other convenient object or structure. The CHA Hybrid MINI 130 is compatible with other Chameleon accessories to enhance the operation of this antenna system. An external antenna tuner is required to provide low SWR.
Not Yet Reviewed
$310.00
Chameleon Antenna Multi-Configuration Coils
Chameleon Antenna Multi-Configuration Coils (MCC) are continuously adjustable loading coils for building resonant portable vertical antenna systems utilizing Chameleon Antenna's MPAS Ready components. The MCC Coil has a 3/8x24 threaded stud on the bottom and a 3/8x240 threaded receptacle on top. This allows for connection of other items, such as adapter coils or whips to the coil to make a complete antenna. This coil provides a starting point for piecing together a custom vertical for portable use, or to extend equipment that an operator already owns.
Not Yet Reviewed
$250.00
Chameleon Antenna CHA SINGLE-EXT Antenna Extensions
Chameleon Antenna CHA SINGLE-EXT Antenna Extensions enhance the range and versatility of antennas like the CHA-BV and other MPAS configurations. They improve resonance and efficiency across various HF bands, making them ideal for portable and field use.
( 1 )
$99.00
—
$116.00
Chameleon Antenna MCC-PRV System Carrying Bags
Chameleon Antenna MCC-PRV System Carrying Bags are the same bags that come with the Chameleon Antenna MCC-PRV-2. Made out of heavy duty 900D Oxford cloth, this bag is made to last and withstand a lot of what the user or nature can throw at it. Measuring 28 x 7 x 2.5", it is designed to hold all of the components of the Chameleon Antenna MCC-PRV antenna system. Each component of the MCC-PRV has a spot in the bag and it serves to keep the antenna system together and organized.
Not Yet Reviewed
$50.00
Chameleon Antenna 33-Foot Counterpoise Kits
Chameleon Antenna 33 Foot Counterpoise Kits are purpose built for portable antenna deployments, making them ideal for POTA, SOTA, Field Day, and other field operations. These counterpoise wires enhance the performance of many portable vertical antennas by providing the essential ground plane radials needed for stronger transmitted and received signals. Each 33 foot wire is terminated with a 3/8 inch ring terminal, allowing quick and secure attachment to the base of the Chameleon MPAS, Basic Vertical (BV), Hybrid MICRO, Hybrid MINI, Chameleon Jaw Mount, or any other vertical antenna system that uses 3/8 inch radial screw terminals. For best performance, using two kits is recommended—spreading the radial wires evenly and deploying as many as practical will yield the most effective results. These counterpoise kits contain the following: 4 - 33ft. Tinned copper wire with KEVLAR PTFE (Teflon) jacket 4 - Isolating O-rings. 4 – Plastic Wire Winders 4 - Steel Tent Stakes An efficient counterpoise is a critical part of any vertical antenna setup. Elevate your portable operations and ensure peak performance by choosing Chameleon Antenna 33 Foot Counterpoise Kits—available now from DX Engineering.
Not Yet Reviewed
$130.00
Chameleon Antenna LZ Sloper Wires
Chameleon Antenna LZ Sloper Wires are 60 foot long, 26-guage wire with a clip and a ring on one end and a ring at the other end. This allows for clipping the wire to the tip of a whip and then running out the wire in a lazy L configuration. This is a perfect addon to any of Chameleon Antenna's MPAS Ready antennas, allowing for a secondary antenna configuration. Sixty feet of 26-guage braided copper wire, Kevlar reinforced and protected by a PTFE sleeve, combined with a winder make this wire easy to deploy, easy to recover and is length adjustable depending on the needs of the operator and space available. This addon enhances the equipment the operator already owns and can give the operator additional capabilities for POTA, SOTA, or general EMCOMM activities.
Not Yet Reviewed
$42.00
Chameleon Antenna Broadband Base Dipoles
Chameleon Antenna Broadband Base Dipoles are proven broadband antennas that cover from 3.5 MHz to 54.0 MHz or 1.8 MHz to 54 MHz depending on the length of the antenna. Three models are available to offer a solution that will fit your lot: 60 ft., 120 ft., and 146 ft. Each antenna comes with a broadband matching transformer that can handle 100W SSB, 50W CW, and 25W on all other modes. The Broadband Dipoles can be raised either in an Inverted V configuration, or if you have the room for it, a horizontal dipole. This allows for limited space installations and slightly different radiation patterns. Utilizing 16-guage Tinned Copper Kevlar reinforced, PTFE wire, these antennas are as rugged as they are practical. Simply connect one leg of the wire to the antenna terminal on the matching network, connect the other wire to the ground terminal, hoist the matching network, stretch out the legs and attach them to supports and you have an antenna that will cover the HF spectrum. To obtain matches across all bands that an antenna covers, an antenna tuner is required. The Chameleon Antenna B3D-60 is a 60-foot dipole covering 3.5 to 54 MHz. Featuring two 30-foot legs, it is an excellent choice for portable operations, Field Day events, and installations where space is limited. Its compact size allows multi-band HF operation while fitting comfortably on smaller properties. The Chameleon Antenna B3D-120 is a 120-foot dipole covering 1.8 to 54 MHz. With two 60-foot legs, it is designed for operators who have more available space and want improved low-band performance while still working within moderate space constraints. It offers excellent coverage from 160 meters through 6 meters. The Chameleon Antenna B3D-146 is a full-size 146-foot dipole covering 1.8 to 54 MHz. Featuring two 73-foot legs, it is optimized for installations with sufficient space to accommodate a full-length dipole. This configuration delivers outstanding low-band performance and maximum operating flexibility across the HF spectrum and 6 meters.
Not Yet Reviewed
$136.00
—
$192.00
Chameleon Antenna MCC Multi Configuration Coils
Chameleon Antenna MCC Multi Configuration Coils serve as the core component of the CHA-PRV-SOTA and CHA-PRV-POTA portable antenna systems and they are available here as a replacement part. Because of their modular nature, they are also compatible with the components and accessories from other popular Chameleon antennas, such as the Modular Portable Antenna System (MPAS 2.0), MPAS Lite antenna, or even to homebrew your own antenna system. The CHA-MCC provides base-loaded inductance and is adjustable for resonance at the operating frequency. Constructed from anodized OD green aluminum, white Delrin and stainless steel and silver-plated copper wire. Additional Features and Specifications: * Power Handling: 500W SSB, 300W CW, 200W Digital and all other modes. * 3/8-24 in. Thread Base * SO-239 Female Connector * Diameter = 1.250 in. * Length Collapsed = 12.50 in. * Length Extended = 19.50 in. * Weight = 0.94 lbs.
Not Yet Reviewed
$350.00
Chameleon Antenna Portable Resonant Vertical Antennas 2.0
Chameleon Antenna Portable Resonant Vertical Antennas 2.0 is a lightweight rugged antenna designed for quick deployment and recovery in the field. As this antenna is modular it can be combined with components of the popular Chameleon MPAS antenna system. The Chameleon PRV 2.0 system comes with a 58-inch telescoping stainless steel whip, a single extension 27-inch aluminum mast, a puck hub for attaching the included four 12.5 foot long radial wires that are on wire winders, tent stakes, a blank adapter (for connecting the coax to the antenna) a 12 foot long coax cable made of RG-58 with an integrated RF choke, a set of band keys (to help with a starting point for tuning the antenna when setup. Several mounting options are available: a Ground Spike mount, jaw mount, carbon fiber mini tripod or no mount at all. If you use a camera tripod adaptor, you can use a heavy-duty camera tripod, monopod or a trekking pole as a support for this antenna. The MCC-PRV covers the 40 through 6-meter bands with the components included in the MCC-PRV in the following configurations: base loaded vertical, center loaded vertical and a vertical dipole for 6 meters. Once the antenna is set up, the included band keys help to get the coil set in an area that is close to the resonance point for the band you're set up for. As a resonant antenna, no tuner is required. A single operator can set up and tune the MCC-PRV-2 in about 10 minutes. The whole package, including the tactical storage bag, weighs a modest 3 pounds, 11 ounces. The storage bag has compartments for all the components of the MCC-PRV-2 and works to keep things organized. The modular approach to the MCC-PRV-2 allows for multiple antenna configurations depending on antenna height, efficiency and footprint available where necessary. By combining the MCC-PRV with the MPAS system, the range and abilities of the antenna system can be extended extend the range and ability of the MCC-PRV. NOTE: The base of this antenna system is sold separately. Additional Feature and Specifications: Frequency Range: Base Loaded Vertical: Approximately 5.8 – 38 Mhz (40- 10 meters) Center Loaded Vertical: Approximately 5.7 – 30 MHz (40 - 10 meters) Vertical Off-Center Fed Dipole: 50.0 – 54.0 MHz (6 meters) Power Handling: 500W intermittent Duty Cycle (SSB), 300W CW, 200W all other modes. Height: SS58 Base Loaded configuration: Approximately 70 in. assembled. (excluding base and mount). SS58 Center Loaded configuration: Approximately 97 in. assembled. (excluding base and mount). 6m Vertical Off-Center Fed Dipole: Approximately 78 in. assembled. (excluding base and mount). SWR: Less than 2:1 at resonance when properly tuned. 2:1 Bandwidth: Typically covers entire Amateur Radio Service band on 30 – 6 meters. (Worst case measured: 132 KHz at 7.1 MHz) Weight: 3 lbs. 11 oz.
Not Yet Reviewed
$650.00
Chameleon Antenna Baluns UNUNs and Chokes
Chameleon Antenna Baluns UNUNs and Chokes are available in a variety of ratios that include 1:1, 4:1, 6:1 and 9:1 and they are compatible with an array of antennas and systems. These Baluns and UNUNs will enhance impedance transformation and signal efficiency while minimizing unwanted interference. The FT240-43 toroidal cores are precisely wound with PTFE-insulated, 14AWG enameled copper wire and assembled in a durable, weatherproof housing that's suitable for even the most adverse weather conditions. The top mounted stainless steel eyebolt provides a secure anchor point for base or portable operation.
( 9 )
$115.00
CHAMELEON ANTENNA Extended Antenna Wires
CHAMELEON ANTENNA Extra Wire Kits afford you the opportunity to use longer wire for their HYBRID, EMCOMM II or homebrew portable stealth antennas. With the option of either 30 ft., 60 ft., 73 ft., 130 ft. or 250 ft., these antenna wires may improve your overall efficiency. Due to the different antenna-wire connector on the EMCOMM II and HYBRID models, they have four antenna wire configurations. The 250 ft. model is simply copper clad PTFE wire on a winder: * 1 X 30 ft. Copper Clad KEVLAR PTFE (Teflon) (-70°C to 150°C) wire * X Winder * 1 X Stainless Steel Carabiner Use part number CHA-30FTEMCOMMII for the EMCOMM II or CHA-30FT30HYBRID for the HYBRID model. Both offer a replacement 30 ft. radiator for their respective models OR * 1 X 60 ft. Copper Clad KEVLAR PTFE (Teflon) (-70°C to 150°C) wire * X Winder * 1 X Stainless Steel Carabiner Use part number CHA-60FT-EMCOMM for the EMCOMM II or CHA-60FT-HYBRID for the HYBRID model. Both offer a replacement 60 ft. radiator for their respective models. OR * 1 X 73 ft. Copper Clad KEVLAR PTFE (Teflon) (-70°C to 150°C) wire * X Winder * 1 X Stainless Steel Carabiner Use part number CHA-73FTEMCOMMII for the EMCOMM II or CHA-73FT-HYBRID for the HYBRID model. Both offer a replacement 73 ft. radiator for their respective models OR * 1 X 130 ft. Copper Clad KEVLAR PTFE (Teflon) (-70°C to 150°C) wire * 1 X Winder * 1 X Stainless Steel Carabiner Use part number CHA-130FT-EMCOMM for the EMCOMM II or CHA-130FT-HYBRID for the HYBRID model. Both offer a replacement 130 ft. radiator for their respective models. OR * 1 X 250 ft. Copper Clad KEVLAR PTFE (Teflon) (-70°C to 150°C) wire * 1 X Winder These antenna wires are not just ordinary wire! These wires are comprised of a proprietary combination of Kevlar®, Teflon® (PTFE) and soft copper. Even at temperatures as extreme as -90 to plus 300 degrees Fahrenheit, these antenna wires are up to the job with supple and non-brittle stretch-free operation. Upgrade your EMMCOMM II or HYBRID antennas or build your own stealth wire antenna. Order CHAMELEON ANTENNA Extra Wire Kits from DX Engineering! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 4 )
$50.00
—
$189.00
On Sale
Chameleon Antenna CHA LRT 2.0 Loop Remote Tuners
Chameleon Antenna CHA LRT 2.0 Loop Remote Tuners allow for remote tuning of the CHA F-LOOP 2.0 magnetic loop antennas. This permits the antenna to be mounted up to 20 feet from the operating position, such as on a balcony or deck and enables precise tuning of the loop. The CHA LRT 2.0 replaces the manual tuning knob with a motor housing and is controlled by a wired, battery-powered control box that features fast and slow tuning buttons. The CHA LRT 2.0 is not an electronic Automatic Tuning Unit (ATU), this is an electric device for mechanically rotating the loop tuning unit capacitor in place of the standard manual tuning knob. Includes detailed instructions to allow for easy installation and operation of the Loop Remote Tuner.
Not Yet Reviewed
$350.00
$262.50
CHAMELEON ANTENNA Portable HF Antennas
CHAMELEON ANTENNA Portable HF Antennas are made with the finest materials available. They can be used for multiple purposes such as Base Station, Portable, Mobile, Marine, EMCOMM, MARS/CAP, ARES, SATERN, RACES, First Responders, Emergency Preparedness, SKYWARN, Military and Government communications and much more. CHAMELEON ANTENNA Portable HF Antennas are very effective antennas for deed-restricted lots and for rapid-deployment communication systems. Built to last, they survive very harsh conditions where other antennas fail. The wide bandwidth-capability of Chameleon Antennas provides reliable and efficient communications. Unlike other multiband antennas, they require no changing of switches, jumpers or coils. Their simple design and integrated impedance matching transformer doesn't require special assembly tools. Be sure to click the "More Detail…" link on our page for additional information on each antenna. Do you need a rapid-deployment HF antenna that's stealthy, economical, light weight and manageable by a single person? If so, give CHAMELEON ANTENNA Portable HF Antennas a look… then order yours from DX Engineering!
( 54 )
$160.00
—
$450.00
Chameleon Antenna CHA-BV-BNC HF Basic Vertical Antennas
The Chameleon Antenna CHA-BV-BNC HF Basic Vertical Antenna system redefines versatility in portable antennas, offering an efficient and highly adaptable setup for single-band resonance from 40 - 6M. This antenna system is specifically engineered to meet the needs of field operators, emergency responders, and amateur radio enthusiasts who require reliable communication in varied environments.
( 1 )
$450.00
Chameleon Antenna Hybrid Mini BNC Portable HF Antennas
Chameleon Antenna Hybrid Mini BNC Portable HF Antenna systems are offered with different wire lengths, allowing for the setup of a broadband long-wire antenna without additional parts. Simply choose the variation that fits your needs. Additional wire lengths and accessories are available, making it ideal for experimenting, or optimizing your antenna setup. The Hybrid Mini BNC antenna base is a versatile system designed for the 160-6m bands, featuring a built-in 1:5 broadband matching transformer and a maximum power rating of 500W SSB, 100W CW, and 40W for high duty cycle digital modes. A 3/8-24in. threaded connector is included for mounting various antenna radiators, and a BNC female connector on the side for coaxial connection. The Hybrid Mini base also has a 3/8-24 in. stainless steel threaded bolt on the underside for grounding. Radials are generally not required but can enhance the radiation characteristics depending on the configuration, and a tuner may be necessary for some bands and configurations.
Not Yet Reviewed
$265.00
—
$310.00
Chameleon Antenna CHA WARC-D Dipole Antennas
Chameleon Antenna CHA WARC-D Dipole Antennas are specifically designed to complement the versatile CHA LEFS 4010. The CHA LEFS 4010 features a dual input system, allowing seamless integration with both end-fed and dipole antennas. The CHA-WARC-D Dipole Antennas covers three crucial WARC bands: 30M (Orange), 17M (Yellow), and 12M (Blue). The 30M, 17M, and 12M bands, also known as WARC bands, are reserved by international agreement to be free from contesting activities. This ensures that these bands are quieter and less congested, making them ideal for casual and long-distance (DX) communications. They are particularly valuable during periods of high solar activity when propagation conditions are optimal.
Not Yet Reviewed
$85.00
Chameleon Antenna SOTA Activation Zone Model 2 Portable HF Antennas
Chameleon Antenna SOTA Activation Zone Model 2 Portable HF Antennas were designed specifically for the demanding conditions and constraints encountered during Summits on the Air (SOTA) activations or other extreme outdoor radio sports. The CHA SOTA AZ-1 will operate on 40, 30, and 20 meters and does not require an antenna tuner. When packed, it is small and light weight, and it can be used on summits that do not have trees using an operator supplied 10-15ft. telescopic mast or other suitable support. Both Near Vertical Incident Skywave (NVIS) propagation and DX communication are supported by this antenna. The CHA SOTA AZ-2 by Chameleon Antenna comes pre-assembled, ready-to go, and sets a new standard for radio sport antennas. With its versatile design and high-quality components, operators can confidently deploy the CHA SOTA AZ-2 in a variety of environments and operational conditions, ensuring reliable and efficient communication.
( 1 )
$208.99
Chameleon Antenna MCC-PRV Band Tuning Keys
Chameleon Antenna MCC-PRV Band Tuning Keys provide an initial starting point for tuning the Chameleon MCC-PRV in the field. Using the Band Tuning Keys allows for coarse adjustment of the MCC coil; once that's accomplished, fine tuning will get the resonance point where the operator wants it. These band keys are the same as supplied with the MCC-PRV antenna kit.
Not Yet Reviewed
$25.00
Chameleon Antenna CHA Hybrid MICRO 30 Portable HF Antennas
Chameleon Antenna CHA Hybrid MICRO 30 Portable HF Antennas are lightweight, portable broadband antenna systems that offer maximum portability and performance. This antenna system is designed to operate from 1.8 – 54 MHz when used along with an external antenna tuner. The CHA Hybrid Micro 30 is most efficient when elevated at a reasonable height and can be supported by trees, masts, or any other convenient object or structure.
Not Yet Reviewed
$240.00
CHAMELEON ANTENNA Counterpoise Kits
Chameleon Antenna Counterpoise Kits are made for portable antenna deployments, ideal for operations like POTA, SOTA and Field Day. These counterpoise wire kits work with many portable vertical antennas to create the required ground plane radials for improved transmitted and received signals. Each wire is terminated with a 3/8 in. ring terminal that attaches to the base of the Chameleon Hybrid MICRO, Hybrid MINI, Chameleon Jaw Mount, or other vertical antenna bases with a 3/8 in. screw terminals for radials. Two kits work better than one. Spread radial wires out evenly, using as many as practical, for best results. These counterpoise kits contain the following: 4 - 25 ft. Tinned copper wire with KEVLAR PTFE (Teflon) jacket 4 - Isolating O-rings. 4 – Plastic Wire Winders 4 - Steel Tent Stakes An effective counterpoise is an important part of any vertical antenna system. Be sure to order your CHAMELEON ANTENNA Counterpoise Kits from DX Engineering!
( 10 )
$106.00
Chameleon Antenna SOTA Activation Zone Model 1 Portable HF Antennas
Chameleon Antenna SOTA Activation Zone Model 1 Portable HF Antennas were designed specifically for the demanding conditions and constraints encountered during Summits on the Air (SOTA) activations or other extreme outdoor radio sports. The CHA-SOTA-AZ-1 will operate from 60 - 10 meters with an antenna tuner. When packed, it is small and lightweight. It can be used on summits that do not have trees using a user supplied telescopic mast, or other suitable antenna support such as a fishing or kite pole. Note: The transceiver shown in the user manual and other documentation is NOT included.
( 3 )
$146.99