Availability
COMTEK HF Vertical Phased Arrays
COMTEK ACB-4 Series Four-Square Switch Relay Units
COMTEK ACB-4 Series Four-Square Switch Relay Units use a well-established design and proven technology to offer any ham an advanced antenna system with s possible. Our phased array systems are affordable, simple to install, and easy to use. COMTEK ACB-4 Hybrid Four-Square Relay Units are single-band phasing and relay devices. They are typically in stock for every major HF contesting Amateur band and 30 meters; 60 meter array units are available by special order. Four-Square arrays are single band specific, due to antenna spacing and phasing feedline lengths, and for proper phasing and patterns. For manual operation, these relay units require the COMTEK ACB-4A Four-Square Control Console. It is now made to run on 12 to 14 Vdc, allowing easy operation of the four square array with battery emergency or International power sources. A DX Engineering factory-tuned cable feed system for the vertical array (available for your center frequency and sold separately) will provide the best performance. The ACB Series Hybrid Switch Relay Units also require a good 50 ohm, non-inductive dummy load. Contact DX Engineering for more information on Four Square Array components.
( 3 )
$399.99
—
$539.99
COMTEK ACB-4 Hybrid Four-Square Systems
COMTEK ACB-4 Hybrid Four-Square Systems are phased array Relay Units and Control Consoles that are affordable, simple to install, and easy to use. A four-square phased array consists of four mono-band resonant elements fed in phase relationships and power ratios that produce a directional cardioid pattern. Four-square arrays offer up to 5 dB of forward gain and fantastic front-to-back rejection over 25 dB! COMTEK ACB-4 Hybrid Four-Square Systems are designed for use with four quarter-wave ground mounted verticals, spaced one-quarter free space wavelength on the side of the square, with complete ground radial systems. Properly installed with quarter-wave 75-ohm phasing feedlines, the Four Square provides an excellent cardioid pattern that is steerable to the four directions of the corners of the four square array. Ground-mounted vertical arrays are easier to build and less costly to maintain than towers and beam antennas. Four-Square arrays are a practical solution for building a high performance directional HF antenna system, especially for Low Band DXing and contesting. Click the "More Details" link for more information on COMTEK ACB-4 Hybrid Four-Square Systems. COMTEK ACB-4 Hybrid Four-Square Relay Units are single-band phasing and relay devices. They are typically in stock for every major HF contesting Amateur band, and for 30 meters. The 60 meter band is available by special order. Four-Square arrays are single band specific, due to antenna spacing and phasing feedline lengths, for proper phasing and patterns. DX Engineering offers a full line of 75 ohm Phasing and 50 ohm feedline coaxial cables, control cables, antennas and accessories for your phased-array installation. The COMTEK ACB Series Hybrid Units also require a good 50 ohm, non-inductive dummy load. The electronically and mechanically improved COMTEK ACB-4 Hybrid Four-Square Systems now include the new COMTEK ACB-4A Four-Square Control Console. Specially designed to be useful as replacements for existing COMTEK ACB Hybrid four-square antenna systems, ACB-4A control consoles now feature a 13.8 VDC input to be easily integrated into all stations, including those that can be run on 12V DC emergency power. Their front panels have four-position rotary switches and four label pads and LEDs to indicate the array directional positions. The COMTEK ACB-4A Four-Square Control Console is ready to control your COMTEK Hybrid Array with low-cost three conductor control cable. COMTEK ACB-4 Hybrid Four-Square Systems include the Hybrid Relay Units with these features: * 2 kW rating for Amateur SSB and CW * 15 amp gold plated contact relays with dust covers * PTFE silver stranded wire over fiberglass tape-wound toroids * Balanced temperature, frequency, and voltage stable capacitors * Double-sided printed circuit board * MOVs for lightning surge protection with RF bypass caps * Brushed aluminum Z-chassis and cover with riveted seams * Mounting clamp included Regardless of the band you choose, COMTEK ACB-4 Hybrid Four-Square Systems from DX Engineering will help you rack up the contacts!
( 2 )
$569.98
—
$709.98
COMTEK ACB-4A Series Four-Square Control Consoles
COMTEK ACB-4A Series Four-Square Control Consoles are specially designed replacements for the COMTEK ACB Series Hybrid four-square antenna systems. Now featuring a 12V DC input, they are easily integrated into all stations, including those that can be run on 12V DC emergency power. They have four scratch pads that you may label and associated LEDs to indicate the array's directional positions. COMTEK ACB-4A Series Four-Square Control Consoles from DX Engineering are ready to control your COMTEK Hybrid Array.
( 3 )
$169.99
COMTEK Phased Vertical System Replacement Relays
COMTEK Phased Vertical System Replacement Relays are offered for repairing COMTEK PVS-2 switch relay units as well as COM-STACK-2 relay units. These RF-capable, DPDT panel mount relays have contacts rated to 2 kW RF at low SWR. They are designed to be operated at 12 Vdc, with a minimum of just under 10 Vdc required for pull-in, and they have a coil resistance of 85 ohms. Since they are chassis or panel mount relays, they are especially well suited for a wide range of your homebrew projects.
( 1 )
$31.99
COMTEK Control Console Replacement Parts
COMTEK Control Console Replacement Parts are available to repair your COMTEK switch control console.
Not Yet Reviewed
$21.99