Availability
Diamond Antenna Meters and Test Equipment
Diamond Antenna DL30 Series Compact Dummy Loads
Consider one of these Diamond Antenna DL30 Series Compact Dummy Loads. Rated from 0 to 500 MHz, these RF loads allow you the opportunity to test your rig without tying up the airwaves with a test carrier. Capable of 15 watts continuous power, or up to 100 watts for short periods, these DL30 Series loads are available with either PL-259 or N-Type connectors. These units present your transmitter with a 50-ohm load and a maximum 1.15:1 SWR across their entire frequency range! DL-30 characteristics: * Frequency: DC to 500 MHz * Rated Power: 15 watts continuous, 100 watts peak * Connector: PL-259 or N-Type (depending on model) * Impedance: 50 ohms * VSWR: 1.15:1 maximum * Dimensions: 30mm Diameter x 75mm Length (1.18 x 2.95 in.) Use them to verify output power, compare your antenna efficiency to a known standard, or with your wattmeter to get tuned up. One thing's certain- you'll be no dummy when you use one of these Diamond Antenna DL30 Series Compact Dummy Loads from DX Engineering!
( 26 )
$39.99
—
$59.99
Diamond Antenna SX600 Dual Power Meters
Diamond Antenna SX600 Dual Power Meters provide a switchable selection of metering from one of two directional couplers in one box! Select the 1.8 to 160 MHz coupler for your Low-Band/VHF rig or select the 140 to 525 MHz coupler for your VHF/UHF rig. Since there are two separate couplers, you can leave the SX600 in-line with both rigs at the same time! The SX600 measures forward/reflected power and SWR using a single sweep meter. With three full-power scales of 5, 20, and 200 watts, the SX600 provides handheld, QRP, and high power operating levels. With most of today's rigs providing 200 watts or less, the SX600 will satisfy the vast majority of transceivers. Their compact size makes these meters useful for testing both base and mobile installations. Low insertion loss and accurate readings mean that your station will operate to peak efficiency. Speaking of peaks, these meters will read peak watts, as well as RMS! That's so handy when operating SSB on HF or VHF/UHF bands! Note: For additional product information, please look at the files under the "Documentation" tab. When you need the features and flexibility of a dual-input power/SWR meter, one of these Diamond Antenna SX600 Dual Power Meters from DX Engineering is the obvious choice!
( 5 )
$199.99
Diamond Antenna SX200 Power Meters
Diamond Antenna SX200 Power Meters measure forward/reflected power and SWR using a single sweep meter. Their compact size makes these meters useful for testing both base and mobile installations. Featuring switchable RMS or peak power, the illuminated meter also displays antenna SWR as needed. The small size of these meters will allow for installation in many vehicles, and the 1.8 to 200 MHz coverage suits numerous base and mobile transceivers. Only 4 watts of power are required for testing, so many 2-meter hand-helds and 2-meter base antennas may be tested, too! Note: For additional product information, please look at the files under the "Documentation" tab. Incorporating three power ranges with full-scale readings of 5, 20, and 200 watts, these Diamond Antenna SX200 Power Meters are a superlative addition to any amateur station!
( 11 )
$104.99
Diamond Antenna SX20C Power Meters
Diamond Antenna SX20C Power Meters are compact SWR-power meters very suitable for work in the mobile or ham-shack. Featuring a cross needle design for measuring SWR and output power simultaneously, these meters provide switchable, full-scale power readings of 30 or 300 Watts. With ratings across three bands of 3.5-30 MHz, 50-54 MHz, and 130-150 MHz, these SWR/Power Meters are flexible enough for many amateur radio operators. Note: For additional product information, please look at the files under the "Documentation" tab. When you are looking for a small and cost-effective solution to your antenna testing needs, remember that Diamond Antenna SX20C Power Meters from DX Engineering are a great addition to your antenna system, test bench, or tool kit!
( 4 )
$99.99
Diamond Antenna SX400 Power Meters
Everything the SX200 does for you on HF, the Diamond Antenna SX400 Power Meters will do on VHF and UHF. SX400 meters measure forward/reflected power and SWR using a single sweep meter. Their compact size makes these meters useful for testing both base and mobile installations. Featuring switchable RMS or peak power, the illuminated meter (external power required) also displays antenna SWR, as needed. The small size of these meters will allow for installation in many vehicles, and the 140-525 MHz coverage suits numerous VHF/UHF base and mobile transceivers. Note: For additional product information, please look at the files under the "Documentation" tab. Incorporating three power ranges with full-scale readings of 5, 20, and 200 watts, these Diamond Antenna SX400 Power Meters from DX Engineering are a must for the active VHF/UHF amateur operator!
( 6 )
$116.99
Diamond Antenna SX1100 Dual Power Meters
Diamond Antenna SX1100 Dual Power Meters provide a switchable selection of metering from one of two directional couplers in one box! One coupler covers 1.8 to 160 MHz, while the other covers 430 to 1300 MHz in three bands. Select the 1.8 to 160 MHz coupler for your Low-Band/VHF rig, or select the 430 to 1300 MHz coupler for your UHF rig. Since there are two separate couplers, you can leave the SX600 in-line with both rigs at the same time! The three UHF bands are selectable for 430-450, 800-930, and 1240-1300 megahertz. Low insertion loss and accurate readings mean that your station will operate to peak efficiency. Speaking of peaks, these meters will read peak watts, as well as RMS! That's so handy when operating SSB on HF or VHF/UHF bands! The SX1100 measures forward/reflected power and SWR using a single sweep meter. With three full-power scales of 5, 20, and 200 watts, the SX1100 provides handheld, QRP, and high power operating levels. With most of today's rigs providing 200 watts or less, the SX1100 will satisfy the vast majority of transceivers. Their compact-size, selectable power levels make these meters useful for testing both base and mobile installations. Amateur activity on the 33 and 23-Centimeter Bands has been steadily increasing. Having an SWR/power meter to cover from 1.8 to 1300 MHz is a logical progression in test equipment. Note: For additional product information, please look at the files under the "Documentation" tab. When you need the features and flexibility of a dual-input, four-band HF/VHF/UHF power/SWR meter, one of these Diamond Antenna SX1100 Dual Power Meters is the choice for pushing the communications frontiers!
( 2 )
$267.99
Diamond Antenna SX40C Power Meters
Diamond Antenna SX40C Power Meters are compact VHF/UHF SWR-power meters that are very suitable for work in your mobile or ham-shack. Featuring a cross-needle design for measuring SWR and output power simultaneously, these meters provide switchable, full-scale power readings of 30 or 300 Watts. With continuous coverage from 144 to 470 MHz, these SWR/Power Meters are flexible enough for many 2-meter through 70-centimeter applications. Note: For additional product information, please look at the files under the "Documentation" tab. When you are looking for a small and cost-effective solution to your antenna testing needs, remember that Diamond Antenna SX40C Power Meters from DX Engineering are a great addition to your VHF/UHF antenna system, test bench, or tool kit!
( 5 )
$99.99