Availability
DX Commander Parts and Accessories
DX Commander DX10 Antenna Wire Spools
DX Commander DX10 Antenna Wire Spools provides enough wire to replace the elements on DX Commander antenna models while still having enough wire left over to make several radials. Made in England for DX Commander, DX10 wire has an outstanding reputation for both strength and in particular, extreme flexibility. The insulation is "arctic grade" and still flexible down to -40° F. Originally designed for military use, this insulation is particularly strong but highly flexible and the stranded annealed copper wire is approximately equivalent to 19 AWG and is made from 24 strands of 0.008 in. (0.2mm) wire.
( 17 )
$95.99
DX Commander MK2 Signature 9 HF Multi-Band Vertical Antennas
DX Commander MK2 Signature 9 HF Multi-Band Vertical Antennas are an updated version of the original Signature 9 system, featuring a redesigned heavy-duty base section and improved support poles. It's important to note the original Signature9 MK1 plates sets do not fit MK2 poles. The heavy-duty, free-standing DX Commander MK2 Signature 9 antenna design is built on the success of the original DX Commander Classic and Signature 12.4 designs. Efficiently resonant on every HF band of operation, featuring wide SWR bandwidth and low take-off angle, the MK2 Signature 9 covers the Amateur bands 40 through 10 meters, with 80 meters available by adding a horizontal Inverted-L wire. DX Commander vertical antennas are based on the same principles as a fan dipole, with several vertical wire elements of various resonant lengths connected to a common feedpoint. The wire elements and support ropes are arranged with spacer plates around the non-conductive fiberglass mast. When installed with an appropriate radial system, the MK2 Signature 9 achieves efficient quarter-wave vertical performance with natural resonance and low SWR on every band, without the need for traps, coils or antenna tuners. Band-hopping DXing and simultaneous multi-band operations are supported. The MK2 Signature 9 antenna is rated at 1500W SSB/CW, 400W FT8 and other digital modes.
Not Yet Reviewed
$692.98
DX Commander Vertical Antenna Replacement Telescoping Masts
DX Commander Vertical Antenna Replacement Telescoping Masts are identical to the telescoping masts that are supplied with each of the DX Commander Vertical Antenna kits. These telescoping masts share the same specifications as the original masts and serve as direct replacements.
( 53 )
$60.00
—
$320.00
DX Commander Signature 9 v2 Plate Sets
DX Commander Signature 9 v2 Plate Sets are replacement plate sets for the DX Commander Signature 9, version 2. This plate set does not come with nuts and bolts or any other accessories. The aluminum plates have 6mm threaded holes for use with any 6mm bolts that you may have on hand. The ground plate has a 16mm hole for the included SO-239 cable assembly. Plates are made out of UV Stable Plastic and 5251 Aluminum. This plate set comes with: • Ground Plate • Driven Plate • Guy Plate • Mid Spreader • Upper Spreader • Top Spreader • SO239 Assembly
Not Yet Reviewed
$162.00
DX Commander Signature 12.4 HF Multi-Band Vertical Antennas
DX Commander Signature 12.4 HF Multi-Band Vertical Antennas are an excellent choice for DX performance and general operations. Efficiently resonant on every HF band of operation, featuring wide SWR bandwidth and low take-off angle, the Signature 12.4 covers the Amateur bands 80 to 6 meters. DX Commander vertical antennas are based on the same principles as a fan dipole, with several vertical wire elements of various resonant lengths connected to a common feedpoint. The wire elements and support ropes are arranged with spacer plates around the non-conductive fiberglass mast. When installed with an appropriate radial system, the Signature 12.4 achieves efficient quarter-wave vertical performance with natural resonance and low SWR on every band, without the need for traps, coils or antenna tuners. Band-hopping DXing and simultaneous multi-band multiplexed operations are supported. The Signature 12.4 antenna is rated at 1500W SSB/CW, 400W FT8 and other digital modes.
( 7 )
$792.79
DX Commander Signature 9 Ground Posts
DX Commander Signature 9 Ground Posts are the same as supplied with the DX Commander Signature 9 Kit. These ground posts are made via a pultrusion process and have a high glass content, no carbon, and are extremely strong and flexible. These posts have a corrosion barrier built into the surface of them, meaning that they can be either dug or concreted into the ground.
Not Yet Reviewed
$61.00
DX Commander Expedition Portable HF Multi-Band Vertical Antennas
DX Commander Expedition Portable HF Multi-Band Vertical Antennas are an excellent choice for DX performance and general operations. Efficiently resonant on every HF band of operation, featuring wide SWR bandwidth and low take-off angle, the Expedition covers the Amateur bands 40 to 6 meters. DX Commander vertical antennas are based on the same principles as a fan dipole, with several vertical wire elements of various resonant lengths connected to a common feedpoint. The wire elements and support ropes are arranged with spacer plates around the non-conductive fiberglass mast. When installed with an appropriate radial system, the Expedition achieves efficient quarter-wave vertical performance with natural resonance and low SWR on every band, without the need for traps, coils or antenna tuners. Band-hopping DXing and simultaneous multi-band multiplexed operations are supported. The Expedition antenna is rated at 1500W SSB/CW, 400W FT8 and other digital modes.
( 8 )
$434.13
DX Commander CLASSIC 2 HF Multi-Band Vertical Antennas
DX Commander CLASSIC 2 HF Multi-Band Vertical Antennas are an excellent choice for DX performance and general operations. Efficiently resonant on every HF band of operation, featuring wide SWR bandwidth and low take-off angle, the CLASSIC 2 covers the Amateur bands 40 to 2 meters*. DX Commander vertical antennas are based on the same principles as a fan dipole, with several vertical wire elements of various resonant lengths connected to a common feedpoint. The wire elements and support ropes are arranged with spacer plates around the non-conductive fiberglass mast. When installed with an appropriate radial system, the CLASSIC 2 achieves efficient quarter-wave vertical performance with natural resonance and low SWR on every band, without the need for traps, coils or antenna tuners. Band-hopping DXing and simultaneous multi-band multiplexed operations are supported. The CLASSIC 2 antenna is rated at 1500W SSB/CW, 400W FT8 and other digital modes.
( 6 )
$441.97
DX Commander Rapide2-PLUS HF Multi-Band Vertical Antenna Packages
DX Commander Rapide2-PLUS HF Multi-Band Vertical Antenna Packages include a DXC-RAPIDE-GP2 Ground Mounted Fiberglass Post designed for ground mounting the RAPIDE2 antenna system. These Ground Mounted Fiberglass Posts are extremely strong and flexible tubing that's constructed with a high glass, no carbon content fiberglass via a pultrusion process making them perfect for vertical antenna projects. These 3mm, or about 1/8in. wall fiberglass posts are 45.276 (115cm) long and features a corrosion barrier built into the surface for longer life. DX Commander Rapide2 HF Multi-Band Vertical Antennas feature a newly designed and upgraded all-metal end cap for the telescoping mast and upgraded ground plate assembly. These resonant multi-band vertical antenna systems are designed to operate on the 30 through 10 meter Amateur Radio bands (with the 6m band handled by the 30m element as a 1.25 wavelength element). Operation on the 40 meter band is possible with the addition of a user made coil (see the user guide for details). DX Commander Rapide2 vertical antennas are based on the same principles as a fan dipole, with several vertical wire elements of various resonant lengths connected to a common feedpoint. Spacer Plates keep the wire elements and support ropes neatly arranged around the non-conductive fiberglass mast. When installed with an appropriate radial system, the Rapide2 achieves efficient quarter-wave vertical performance with natural resonance and low SWR on every band, with no traps, coils or antenna tuners. Band-hopping, DXing and simultaneous multi-band operations are supported. The Rapide2 antenna is rated at 1500W SSB/CW, 375W FT8 and other digital modes.
( 2 )
$444.90
DX Commander CLASSIC 2 Plus 80m HF Multi-Band Vertical Antennas
DX Commander CLASSIC 2 Plus 80m HF Multi-Band Vertical Antennas are an excellent choice for DX performance and general operations. Efficiently resonant on every HF band of operation, featuring wide SWR bandwidth and low take-off angle, the CLASSIC 2 Plus 80 covers the Amateur bands 80 to 2 meters* with the exception of 30M as the 30M element is replaced with an 80M element. DX Commander vertical antennas are based on the same principles as a fan dipole, with several vertical wire elements of various resonant lengths connected to a common feedpoint. The wire elements and support ropes are arranged with spacer plates around the non-conductive fiberglass mast. When installed with an appropriate radial system, the CLASSIC 2 achieves efficient quarter-wave vertical performance with natural resonance and low SWR on every band, without the need for traps, coils or antenna tuners. Band-hopping DXing and simultaneous multi-band multiplexed operations are supported. The CLASSIC 2 antenna is rated at 1500W SSB/CW, 400W FT8 and other digital modes.
( 4 )
$536.04
DX Commander Signature 18 Nebula eXtreme HF Multi-Band Vertical Antennas
DX Commander Signature 18 Nebula eXtreme HF Multi-Band Vertical Antennas are an excellent choice for DX performance and general operations. Efficiently resonant on every HF band of operation, featuring wide SWR bandwidth and low take-off angle, the Signature 18 covers the Amateur bands 80 to 6 meters. DX Commander vertical antennas are based on the same principles as a fan dipole, with several vertical wire elements of various resonant lengths connected to a common feedpoint. The wire elements and support ropes are arranged with spacer plates around the non-conductive fiberglass mast. When installed with an appropriate radial system, the Signature 18 achieves efficient quarter-wave vertical performance with natural resonance and low SWR on every band, without the need for traps, coils or antenna tuners. Band-hopping DXing and simultaneous multi-band multiplexed operations are supported. The Signature 18 antenna is rated at 1500W SSB/CW, 400W FT8 and other digital modes.
( 2 )
$933.91
DX Commander Rapide Ground Mounted Fiberglass Posts
DX Commander Rapide Ground Mounted Fiberglass Posts are extremely strong and flexible tubing that's constructed with a high glass, no carbon content fiberglass via a pultrusion process making them perfect for vertical antenna projects. These 3mm, or about 1/8in. wall fiberglass posts are 45.276 (115cm) long and features a corrosion barrier built into the surface for longer life.
( 2 )
$53.99
DX Commander Venture HF Multi-Band Vertical Antennas
DX Commander Venture HF Multi-Band Vertical Antennas are designed for portable operation. The design is built on the proven success of other DX Commander antennas but optimized for portable operation. Efficiently resonant on 40, 20 and 15 meters, the DX Commander Venture is designed for some of the most popular bands for portable operation. Using the same principals as a fan dipole, with several vertical wire elements of various resonant lengths attached to a common feedpoint. The Wire elements and any supporting ropes are arranged on spacer plates with "speed slots" around the non-conductive fiberglass mast. When a proper radial system is attached to the radial plate, the Venture will achieve quarter-wave vertical performance with natural resonance and low SWR on the bands it's configured for with no antenna tuner required. Band hopping DXing and simultaneous multi-band multiplex operations are supported. The Venture is rated at 1500W SSB/CW, 400W FT8 and other digital modes. The Venture antenna is only 23 feet (7 m) so setup is a cinch in the field. SWR bandwidth is typically 300 kHz on the bands the antenna is cut for. The Venture, while being designed for 40, 20 and 15 meters, can be used on 10 and 6 meters with an antenna tuner. DX Commander Venture Features and Specifications: Ground Post: Supplied with a Fiberglass Ground post. Alloy Plates: Aircraft quality 5251 alloy, laser cut in England before deburring to give that "hammered" look, which eliminates sharp edges and provides a nice finish. Spreader Plates: Marine-grade high-density polyethylene sheet material from USA, charcoal-gray, UV and environmentally stabilized to withstand the harshest of marine and high RF conditions. Spreader Plates are machine cut in England to DX Commander specifications. Shock Cord: Marine Grade shock-cord, with a UV and RF stable Dyneema woven exterior. Hardware: Kit includes Stainless Steel bolts, wing nuts, and spade connectors. Coaxial Connector: UHF Female SO-239 coaxial connector, nickel plated brass with PTFE dielectric. Fiberglass Poles: Made to DX Commander specifications in a spiral wound fiber, high-quality epoxy and paint finish. DX10 Wire: Made in England for DX Commander, DX10 wire has an outstanding reputation for both strength and in particular, extreme flexibility. The insulation is "arctic grade" and still flexible down to -40° F. Originally designed for military use, this insulation is particularly strong but highly flexible and the stranded annealed copper wire is approximately 19 AWG and is made from 24 strands of 0.008 in. (0.2mm) wire. All DX Commander Venture Antenna Kits come with everything you need (except the patio): • Rapide2 Mast – 23 ft. (7m) Extended Height • Supplied with a 1.50 in. (38mm) Fiberglass Ground Post • The DX Commander Ground Plate – 0.128 in. (3mm) thick laser cut 5251 alloy, with the hole for the included SO-239 assembly and 6 pre-drilled holes for the ground radials. Use up to 4 wires per connector and you can double up on connectors to achieve 48 radials total. • The Driven Plate – 0.128 in. (3mm) thick with pre-drilled holes for the three bands that the antenna is cut for. • The Venture kit comes with 3 spreader plates with speed slots to help facilitate setup in the field. One of the spreader plates has three holes to attach guy ropes to. • 328 ft. (100m) of DX10 Antenna Wire – cut all the elements first, then cut radials with the remaining wire. • SO-239 Coaxial Connector Assembly • Selection of Spade Connectors • Marine Dyneema Shock-Cord • Glue Lined Shrink-Wrap • Stainless Steel Hardware.
( 1 )
$354.97
DX Commander EzyClamp Replacement Mast Clamp Kits
DX Commander EzyClamp Replacement Mast Clamp Kits serve as direct replacements for the mast clamps originally supplied with the DX Commander Telescoping Masts and come packaged with the proper size and quantity of clamps needed. These replacement clamps are constructed of durable Nylon 66. When properly installed and torqued at the bottom of each telescoping section, they ensure that each mast section will not compress under pressure. EzyClamps features an 8mm hex, however the Expedition clamps feature a wing nut style thumbscrew. Additional Features and Specifications: * Adjustment – 8mm (approx. 5/16 in.) Hex Screw (Expedition clamps include a wing nut) * Max Torque – 2.0Nm * Band Width – 0.50in. – (12.7mm) * Operating Temperature – Max Long term Temp 257°F (125°C) – Occasional Peak Temp 302°F (150°C) * Material - Nylon 66 * RoHS Compliant * No Hazardous Materials * Flammability - UL 94 V-2 * Minimum Tensile Strength - 359lbs/163kg/1600N * Continuous Load - 20lbs/9.1kg/89N
( 8 )
$8.39
—
$25.99
DX Commander Rapide2 HF Multi-Band Vertical Antennas
DX Commander Rapide2 HF Multi-Band Vertical Antennas feature a newly designed all-metal end cap for the telescoping mast and upgraded ground plate assembly. These resonant multi-band vertical antenna systems are designed to operate on the 30 through 10 meter Amateur Radio bands (with the 6m band handled by the 30m element as a 1.25 wavelength element). Operation on the 40 meter band is possible with the addition of a user made coil (see the user guide for details). DX Commander Rapide2 vertical antennas are based on the same principles as a fan dipole, with several vertical wire elements of various resonant lengths connected to a common feedpoint. Spacer Plates keep the wire elements and support ropes neatly arranged around the non-conductive fiberglass mast. When installed with an appropriate radial system, the Rapide2 achieves efficient quarter-wave vertical performance with natural resonance and low SWR on every band, with no traps, coils or antenna tuners. Band-hopping, DXing and simultaneous multi-band operations are supported. The Rapide2 antenna is rated at 1500W SSB/CW, 375W FT8 and other digital modes.
( 1 )
$391.99