Availability
DX Engineering Tools and Supplies
DX Engineering Ultra-Grip 2 Crimp Connector Hand Tools and Tool Kits
DX Engineering Ultra-Grip 2 Crimp Connector Hand Tools and Tool Kits are ready to help you make professional quality crimped coaxial cable assemblies, Powerpole® connections and many other popular-size wire terminations. Ultra-Grip 2 Crimp Tools are precision made heavy-duty commercial grade hand crimp tools. They are multi-purpose interchangeable-die tools made from high-quality carbon steel with a tough black-oxide finish for corrosion resistance and durability. These easy-to-use ratcheting crimpers are ergonomically shaped to produce extra manual power, with soft non-slip dual-color thermoplastic rubber grips for comfortable and positive connector crimping results. Ultra-Grip 2's integral ratcheting mechanism lets you make 'semi-automatic' perfect crimps, again and again, with any of the available dies for RF connectors and wire terminations. One of or DXE-UT-CRMP2 Crimp Tools is supplied with the DXE-UT-DIE-8U Crimp Die for RG-8U/213/LMR-400 size cable. The included 2.5 mm Allen wrench is used to change to one of the other optional die sets. Other sets cover the most popular sizes of coaxial cables with ten different Amphenol Connex crimp connectors in UHF Male/PL-259, Type N, BNC; Powerpole® connector sizes 15, 30 and 45 Ampere connectors, Molex connector pins, insulated crimp type connectors for 22-18/16-14/12-10 AWG and un-insulated crimp type connectors for 20-18/16-14/12-10 and 8 AWG. Our crimp tool and dies are compatible with major brand crimp tool manufacturers. DX Engineering Ultra-Grip 2 Crimp Connector Hand Tool Kits, model DXE-UT-KIT-CRMP2, provides a handsome, convenient carrying case furnished with the Ultra-Grip 2 Crimp Connector Hand Tool, cable shears, braid trimming tool and ALL FIVE CRIMP DIE SETS with a precut foam insert providing a home for each tool and die set. Coaxial cable connector crimping dies are cut to enable crimping both the ferrule and the center pin. DXE-UT-CRMP2 Crimp Tools, sold individually, include one set of DXE-UT-DIE-8U Crimp Dies for RG-8U/213/LMR-400 size cable. DXE-UT-KIT-CRMP2 Complete Kits contain: * DXE-UT-CRMP2 Ultra-Grip 2 Crimp Connector Hand Tool * DXE-UT-DIE-8U Crimp Die works on connectors for RG-8U/213/LMR-400 size cable * DXE-UT-DIE-8X Crimp Die works on connectors for RG-8X/LMR-240 AND RG-58/LMR-195 size cable * DXE-UT-DIE-PP Crimp Die for Powerpole® 15, 30, 45A contacts and Molex connector pins * DXE-UT-DIE-INS for insulated crimp style terminals 22-18/15-14/12-10 AWG * DXE-UT-DIE-UNIS for uninsulated crimp style terminals 20-28/26-24/12-10/8 AWG * CNL-911 Coaxial cable shears * DXE-170M Precision braid trimmers * 2.5 mm Allen Wrench * DXE-CRIMP-CASE Custom Tool Case Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Here is a link to a "how-to" video about using DX Engineering Cable Prep and Crimp Tools for Crimp Connectors by Randy, K7AGE: https://youtu.be/T6sYL_eJFaQ Not only are these DX Engineering Ultra-Grip 2 Crimp Connector Hand Tools and Tool Kits perfect for helping you make quality crimps and keeping track of your tools, but they also make it easy for you to duplicate quality crimps every time.
( 126 )
$249.99
DX Engineering Coax Cable Stripping Tools
DX Engineering Coax Cable Stripping Tools provide an easy way to prepare your 50 ohm coax cable for the installation of solder-type PL-259 (UHF-male) and 2-piece solder-type "N" connectors. These handy coax cable strippers work on foam or solid dielectric cables with a precision, 2-step operation. DX Engineering strippers are made with premium, long-lasting, tool-steel cutter blades for clean coaxial cable preparation. These cable stripping tools are intended to be used ONLY on PVC and PE jacketed coaxial cables, not ultra-flex soft rubber-like Thermoplastic Elastomer (TPE) jacket. Use our red DXE-UT-8213 Coax Cable Stripper for 0.405 in. OD cables. The following cables have been successfully stripped using the superior tool steel cutting blades of our DXE-UT-8213: * DXE-213U * DXE-8U * DXE-11U * Belden 8213 RG11/U * Belden 8214 RG-8 foam * Belden RG-213/U * Belden 8237 RG-8/U * Belden 8267** **Belden 8267 and Belden 9913F7: Some cable labeled as Belden 9913F7 (and also Belden 8267) which has a very "squirmy" jacket and is easy to bend into all shapes without rebounding has proven very challenging to strip easily. The jacket material seems different than the Belden (9913F7 and 8267) samples we had on hand from earlier lots that were used to test the DXE-UT-8213. Belden was contacted concerning this and a sample of the suspect 9913F7 was sent for testing. Belden informed us this was their cable (not a suspected counterfeit) and this is a known tolerance in their manufacturing process of this type coaxial cable jacket. Therefore, the DXE-UT-8213 may or may not work properly with some Belden 9913F7 or Belden 8267. Times Microwave LMR-400UF Ultra-Flex has a similar rubbery, thermoplastic jacket that which CANNOT be stripped by this type of cutter. The new purple UT-8213LR Coax Cable Stripping Tools have been designed to properly prepare RG-213 and 8U sized, 0.405 in. coaxial cables for silver-plated solder-type PL-259 connectors (like DXE-PL259-6). These preparation tools will allow you to strip the coaxial cable with special dimensions to facilitate a unique method of soldering the shield to the back of the connector, proven at the K3LR world-wide contest station. DXE-UT-8213 cutter blades are designed to cut through the more rigid materials encountered with high quality coaxial cables with an OD of 0.405 in with PVC (polyvinyl chloride) and PE (polyethylene) jackets. Our green DXE-UT-808X prepares smaller coaxial cables such as DXE-8X and Mini 8. They have been designed and manufactured to properly prepare coaxial cable for use with DXE-PL259, PL-259 Silver Plated, PTFE Insulation PL-259 connectors and associated reducers, or the DXE-N1001-S Type-N Male Silver Plated, PTFE Insulation two-piece Type-N connector (requires a slight additional trimming of the cable center conductor length) and reducers. DXE-UT-808X has been tested with: * DXE-8X * Belden 9258 RG-8/X These cable strippers are NOT intended for use with look-alike RG-8X cables with soft, rubbery, 'squirmy' outer jackets. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. The best way to install solder connectors on your coaxial cables is to prep them the easy way: with DX Engineering Coax Cable Stripping Tools!
( 48 )
$100.99
DX Engineering DXE-8X-PREP-P Coax Cable Prep Tool Combos
DX Engineering DXE-8X-PREP-P Coax Cable Prep Tool Combos pair two of our most popular prep tools in one convenient package! DX Engineering UT-808X cable strippers are the preferred method for preparing RG-8X size cables; including LMR-240, RG-8X and DXE-8X. These strippers easily remove the outer jacket and dielectric to prepare for coaxial connectors. Our new DXE-CGH-8X hinged cable gripper is the perfect companion! These grippers allow you to have a much larger surface to hold onto while the gripper itself securely holds your cable for easy trimming. This is especially helpful with smaller DXE-8X or LMR-240 cables. Please check the "Kit/Combo Contents" tab for more detailed individual-item information. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Make coax cable preparation so much easier. Order DX Engineering DXE-8X-PREP-P Coax Cable Prep Tool Combos and get a better grip on coax preparation!
( 4 )
$107.98
DX Engineering UT-KIT3 Basic Coax Cable Tool Kits
DX Engineering DXE-UT-KIT3 Basic Coax Cable Tool Kits are cost-saving tool kits contained in a handsome, convenient carrying case. They are designed to enable fast, easy installation of soldered PL-259 connectors on single shield cables including RG-8U, RG-213 and RG-11U. These kits are furnished with our high-quality DX Engineering coaxial cable prep tools and accessories. They feature a rugged, lockable enclosure that is fitted with a precut foam insert with a home for each tool. Not only are these DX Engineering Basic Coax Cable Tool Kits perfect for helping you keep track of your DX Engineering coaxial tools, but they also make it easy for you to carry them from job to job. UT-KIT3 includes: - DXE-UT-8213* - Stripping tool for RG-213 or RG-8 size cable - DXE-CG-8U - Coaxial Cable Gripping Tool - DXE-UT-80P - PL-259 assembly tool, (US Pat. 8,701,278 B2) - CNL-911 - Coaxial cable shears - DXE-UT-CASE - Custom made carry case with foam insert fitted with a precut foam insert with a specific position for each tool Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Whether you are a communications professional who prepares coaxial cables frequently or a Radio Amateur who likes the occasional job done right and easily, these DX Engineering Basic Coax Cable Tool Kits will make coax preparation for soldered PL-259s a snap! *IMPORTANT: The UT-8213 Prep Tool is NOT intended for use on dual shield coaxial cables including DXE-400MAX and LMR-400 series. Those cables require crimped shield connectors with different stripping dimension. For dual shield cables use the DXE-UT-405C-P1 Cable Prep Tool for DXE-PL259CS8U-6 Next Generation PL-259, or the DXE-UT-405C-N1 Cable Prep Tool for Type N model 172102H243. See the DXE-UT-KIT-CC1.
( 3 )
$181.99
DX Engineering F-Connector RG-6 Coax Cable Tool Kits
DX Engineering F-Connector RG6 Coax Cable Tool Kits, DXE-UT-KIT-F, provide a handsome and convenient carrying case furnished with three of the most-used DX Engineering RG6 coaxial cable prep tools plus accessories. These kits not only have the right tools to prepare RG-6 size cables, but also include 25 Universal Compression Connectors that now fit any RG6 from 60% braid to Quad Shield. No more color coded F connector types to worry about! The rugged, lockable carrying case is fitted with a pre-cut foam insert that provides a space for each tool, extra blades and the bag of connectors. DX Engineering F-Connector Coax Cable Tool Kits are perfect for helping you keep track of your tools and make it easy to carry them from job to job. DXE-UT-KIT-F Kits include: * Stripping tool for RG-6U dual shield and quad shield and F-6 size cable - DXE-CPT-659 * 25 Universal Compression F-connectors for any RG-6U or F-6 cables – DXE-EX6XL-25 * F Connector Compression Tool - DXE-SNS-CT1 * Coaxial cable shears – DXE-CNL-911 * F-connector tightening tool – DXE-CIT-1 * Stripping tool replacement blades - DXE-CPT-659RB Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. The included 25 count EX6XL type-F Universal Compression Connectors have a rugged metal body and heavy duty black plastic with a large tapered compression area that creates a redundant moisture-tight interface to the coaxial cable. They also feature complete, moisture-tight, circumferential triple-gasket and a compression sealing nut O-ring. These are direct replacements for all previous blue and purple F connectors. EX6XL connectors fit any RG6 from 60% braid to Quad Shield, including RG-6 and F-6 (DXE-F6 and DXE-6UF) and Quad Shield RG-6U (DXE-RG6UFQ and RG6UQ. Installing connector after connector can be tedious. Make your work easier with DX Engineering F-Connector RG6 Coax Cable Tool Kits!
( 4 )
$195.99
DX Engineering Partsbox Storage Cabinets
DX Engineering Partsbox Storage Cabinets are the very handy place to store your DX Engineering Partsbox Storage Cases. They are available empty with just their sliding shelves, to load up with your individually purchased Partsbox separates along with our special coaxial and Anderson PowerPole connector Partsbox offerings. Or, you can buy these cabinets "loaded" with Partsbox empties. Partsbox Storage Cabinets are well designed with protrusions and indentations for interlocking multiple cabinets side-by-side and secure vertical stacking. Each cabinet is 15 1/2 x 16 x 14 1/2 in. (WHD). Each drawer holds each Partsbox Storage Case snugly and slides out 10 in. to allow the lid to open completely, one at a time, for easy access to your part and tools. Both Cabinet versions are here and the Partsbox offering are shown at Related Parts and in the Detail page at the Suggested Parts tab. Now your workbench and the shack can be super organized and cleaned up for company (or personal satisfaction). Get your DX Engineering Partsbox Storage Cabinets and Cases right here and now!
( 4 )
$219.95
DX Engineering Tube Deburring Tools
Designed and manufactured in the USA, DX Engineering Tube Deburring Tools feature hardened steel cutting surfaces arranged in a conical shape. Both the interior and exterior of the tool's cone may be used to smooth the rough edges of the inside and outside of the cut ends of pipe and tubing. Its rotational symmetry allows easy reaming and deburring rough-cut tubing edges with minimum effort. The UT-2125 is usable on all tubing and pipe sizes from 3/8 in. to 2-1/8 in. O.D. The UT-3500 covers sizes from 1-7/8 in. to 3-1/2 in. O.D. The complete tool kit, model UT-KIT-DBR, includes both sizes of conical tools, a small hand deburrer and a half round file. DX Engineering Tube Deburring Tools are reversible, so they are ideal to deburr both ID and OD of aluminum tubing prior to telescoping the sections together. These tools assure a smooth fit without galling and seizing that can occur with the slightest roughness. Only a couple of revolutions with very light pressure is needed to produce excellent results. DX Engineering Tube Deburring Tools may be used to deburr tubing and pipe made of aluminum, fiberglass, copper, steel, plastic pipe, etc.
( 2 )
$119.99