Availability
DX Engineering Grounding and Lightning Protection
DX Engineering Tinned Copper Braid Assemblies
DX Engineering Tinned Copper Braid Assemblies are typically used for the proper grounding of individual pieces of electrical or electronic equipment to a common grounding bus, such as a copper strap or a thicker bus bar. DX Engineering tinned copper braid assemblies are used for industrial, commercial, and broadcasting applications inside of electrical racks, for the connection of sub-assemblies to a metal chassis or grounding point, and for any special application where a high-quality tinned copper braid assembly is required. Our assemblies are made with top-quality tinned copper braid of various widths and lengths, and most are terminated with machine-crimped and hand-soldered terminals. Some assemblies feature heat shrink tubing over the connections for strain relief and longevity. Be confident with your equipment and system grounding with the best--DX Engineering Tinned Copper Braid Assemblies.
( 93 )
$14.25
—
$19.99
DX Engineering Grounding Clamps
DX Engineering Grounding Clamps are used to connect wire grounding conductors of AWG 2 through 10 to a ground rod, tower leg or grounded pipe. These clamps are manufactured from cast bronze, a highly conductive copper alloy, and include high quality 1/4-20 stainless steel screws for maximum longevity and durability. These clamps also accept the stud from our IS-RCT control line protectors, to provide the proper protection of rotator control lines at the base of a grounded tower. Please note that pipe is measured by ID, not OD. For example, 1-1/4 pipe is much larger than 1-1/3 in. OD. DX Engineering Grounding Clamps are available in two sizes, to fit your grounding project. These are great general purpose grounding clamps to have on hand for future projects, so add a few to your order today!
( 8 )
$16.99
DX Engineering Flange Mounting Brackets
DX Engineering Flange Mounting Brackets are handy accessories for mounting lightning protectors or other devices to a grounding panel. Specially made for the protectors that are sold only with a stud, these brackets convert them for flange mounting to a flat panel. Panel mounting hardware is included.
( 5 )
$10.99
DX Engineering Tower Leg Ground Clamps
DX Engineering Tower Leg Ground Clamps provide a very good ground connection between your copper ground strap and tower legs. Protection against lightning is a must for you, your radio tower, and costly Amateur Radio equipment. DX Engineering Tower Leg Ground Clamps are crafted from 100 percent marine-quality 300 Series stainless steel, with a stainless steel inner metal leaf to buffer the copper from touching your galvanized tower legs. These worm-gear transition clamps are available to fit 5/8 in. up to 3.25 in. tower leg/ground strap combos. Get your tower grounded faster and easier with DX Engineering Tower Leg Ground Clamps!
( 5 )
$10.29
—
$13.49
DX Engineering Weatherproofing Kits
DX Engineering Weatherproofing Kits weatherize your outdoor connections and prevent moisture entry and corrosion with vapor wrap and high quality electrical tape. When your non-weather resistant equipment needs to be mounted outdoors, these weatherproofing kits provide needed protection. Use these kits to protect lightning protectors, coaxial connections, antenna joints, steel hardware, junction boxes and just about anything you can wrap with tape by using these kits. The non-conductive malleable vapor wrap sealant is water-impermeable and withstands temperatures from minus 65 degrees F to plus 180 degrees F without cracking. Choose from Standard, Upgraded or Ultimate kits with different grades of vinyl tape. The WK-PRO Kit has more vapor wrap material and five rolls of tape for large projects. See each kit's detailed description. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Reliable waterproofing is important to protect equipment and cable connections from damage caused by moisture penetration. Protect your equipment, handle extreme temperatures, and remain unaffected by water and UV sun rays with DX Engineering Weatherproofing Kits.
( 18 )
$15.99
DX Engineering Cable Feedthrough Couplers
DX Engineering Cable Feedthrough Couplers are extra parts that are designed to fit over your cables that will be routed through the top of DX Engineering Utility Enclosures or other utility boxes or panels. They feature a weather-tight design to keep moisture, dust, and insects out, so your cables and internal hardware will be safe from corrosion. The couplers are available in two sizes, one that fits RG-8X, RG-6, F6 and control cable sizes, or the other for RG-8 and RG-213 sized cables.
( 4 )
$19.99
DX Engineering Coaxial Connection Weatherproofing Kits
DX Engineering Coaxial Connection Weatherproofing Kits provide two types of 3/4 inch tape, sealing and vinyl, that provide the right combination of reliable protection for your coaxial connections. This method provides an inexpensive water moisture and UV barrier that is fully capable for a long term installation, but is also easily and cleanly removed for maintenance. Taping, and subsequent removal and re-taping is accomplished quickly and easily with these tape kits. Each weatherproofing kit each contains two tapes; one roll of 3M Temflex™ 2155 Rubber Splicing Tape TES-2155, a conformable, self-fusing sealing tape as the water barrier, and one roll from three different grades of 3M Vinyl Electrical Tape for a UV barrier. Choose from Scotch Supper 88 Premium, Scotch Super 33 Plus or economy 3M Tartan 1710. Each kit will weatherproof six to ten double connections, depending upon the number of overlapping layers used. Select the kit below with the vinyl tape grade desired. Choose the economy kit for temporary weather protection and one of the professional grade tape kits for the long-term installation. The other type connector weather sealing that is a tar like substance is excellent for permanent commercial installations that are not intended to require removal. Instead, these tape kits also prevent water or condensation from entering your coaxial cable. They are perfect for the amateur, antenna experimenter or professional. Don't let water ruin your temporary or permanent coaxial connections. Moisture ingress could lead to damaged coax and corroded connections and cause high SWR conditions or shorts that could damage your equipment. Order DX Engineering Coaxial Connection Weatherproofing Kits to get those cable connectors sealed and plan for easy weatherproofing removal for future maintenance.
( 18 )
$15.98
DX Engineering Electronic Protection Components
DX Engineering Electronic Protection Components may be used in a variety of electronics and radio applications. These are wire lead components that can be used on circuit boards or in multi-purpose connection devices. Choose from the components listed for detailed specifications: DXE-MOV-82VDC-10 Metal Oxide Varistor, Surge Protector, max. 82VDC/50VAC Pack of 10 DXE-GDT-4KV-5 Gas Discharge Tube, Surge Arrestor, 4kV, Pack of 5 DXE-TVS-1500-10 ESD Suppressor, TVS Diode, Bidirectional, 17VDC max., Pack of 10 DXE-CAP-PT1UF-10 Capacitor, Ceramic, 0.1uf, 1kV DC, RF Bypass, Pack of 10 ---------------------------------------------------------------------------------------------------------------------------------- This series of protection components are well suited for the DXE-CLTB Control Line Terminal Board that provides a flexible and simplified approach to control line surge protection. The DXE-CLTB is a small, 3 inch square printed circuit board (PCB) with four ten-wire compression screw terminal blocks that handle from 14 to 26 AWG conductors and up to 10A. The two outer terminal blocks are for input and output of the control wires and the two 45 degree angled ten-wire compression screw terminal blocks are for connecting electronic surge protection components. This provides for the choice of components to install between the control line and ground to provide shunt protection. Metal Oxide Varistor (MOV), Gas Discharge Tube (GDT), EMP Suppressor TVS Diodes, RF Bypass Capacitors and other wire lead components are easily connected between the control lines and ground. For effective protection wherever shunt devices are used, a low impedance ground is critical. The DXE-CLTB Control Line Terminal Board has four corner grounding screw holes for mounting on metal standoffs to a metal grounding panel inside an enclosure. DXE-CLTB-M Control Line Terminal Board includes a 10-pack of MOVs.
( 1 )
$11.99
—
$15.99