Filters
2 Results Found For "noise"
DX Engineering Coaxial Connectors
The DX Engineering Coaxial Connectors shown here include two-part, silver-plated PL-259 and Type-N connectors designed to be crimped or soldered to the shield and soldered to the center conductor. These connectors deliver excellent performance for HF, VHF, and UHF applications. DX Engineering's PL-259 and Type-N connectors feature silver-plated brass throughout the outer and inner conductors and use PTFE dielectric—the best RF insulator—for very low loss and high electrical breakdown strength. Also available are DX Engineering Silver-Plated Reducers, which adapt standard solder-type PL-259 and Type-N connectors for use with single-shield RG-8X and RG-58U coaxial cables. While many types and grades of coaxial RF connectors are offered on the market, DX Engineering provides only top-quality connectors with silver-plated brass bodies and PTFE dielectric. These two-part solder-style connectors fit RG-213, RG-8U, RG-8X/LMR240 and other standard 0.405 in. single-braid shield coaxial cables intended for soldering*—but not 400MAX or LMR-400 double-shield cables. These solder-shield and solder-center connectors are the preferred choice for many Amateur Radio operators installing single-braid shield coaxial cables. Order your DX Engineering Coaxial Connectors and Reducers today! *NOTE: To prevent noise issues, modern engineering practice has determined that double shield cables that have one foil and one braid should not be soldered to the braid, including DXE-400MAX and LMR-400 style cables. Those cables should be terminated with crimp shield or clamp shield style connectors, also available from DX Engineering.
( 116 )
$11.99
—
$13.29
DX Engineering RF PRO Loop Replacement Components
Since DX Engineering manufactures the RF-PRO-1B® Active Magnetic Loop Receive Antenna, we can offer these RF PRO Loop Replacement Components. Available for refurbishing Pixel, InLogis or DX Engineering Active Magnetic Loops, choose one or more of these individual "Original Equipment" components, component set or handy accessory pack that fills your needs. 1. DXE-RFPRO1B-PA Receive Preamplifier has this new part number for the preamp unit only. This is the weatherproof, metal-encased replacement RF PRO 1B Receive Preamplifier that mounts directly onto the loop bracket. Mounting hardware is not included with this replacement low-noise preamp, but it is available in the… 2. DXE-RFPRO1B-OAP Outdoor Accessory Pack. This package contains the insulated shoulder washers, flat washers and nuts to properly mount the preamp. Also included in this outdoor package for the loop installation are the mast mounting V-Bolts and Saddles and the short RG-6 F connector jumper to connect the loop to the preamp, and weather sealer. User supplied RG-6 coaxial cable is used for the long feedline that is run inside to the… 3. DXE-RFPRO1B-PI Power Inserter. This is the indoor unit that puts a well filtered and regulated 20 Vdc power onto the feedline for the preamp. It carries the loop RF to the receiver via the F connector. This unit also disables the power to the preamp when it is keyed by the transceiver amplifier keying line. The Power Inserter is run on 24 Vac from the… 4. DXE-PSW-24A-6AU AC Adapter. This clean power supply is a linear transformer that converts 120 Vac to the 24 Vac at 600 mA required by the Power Inserter. It is has the attached 2.1mm power connector. 5. DXE-RFPRO1B-IAP Indoor Accessory Pack contains the cables and adapter to connect the transceiver RF and keying lines to the Power Inserter. The F connector coaxial cable connects RF from the Inserter to the radio. A supplied F female to PL-259 adapter facilitates that connection, should you radio need it. An RCA phono patch cable is supplied for keying the Power Inserter and a RCA phono y-adapter provides the additional keying line connection for a power amplifier. 6. DXE-RF-30B Complete Component Package is for a system replacement where only an existing RF PRO 1B Loop is available. All of the above individual components, cables and hardware items listed above, items 1 through 5, but not the loop, are included in this DXE-RF-30B package. 7. DXE-PRO-LOOP is the Replacement RF PRO 1B Loop that is ordered by customers who have all other components of their system working. When your damaged or defective loop needs to be replaced, this is the loop only part to order. RF-PRO-1B® Loops may occasionally need a replacement component or hardware package. DX Engineering RF PRO Loop Replacement Components are available right here, at DX Engineering!
( 9 )
$17.49