Availability
5 Results Found For "Stack"
DX Engineering PRO-STACK 2 Control Consoles
DX Engineering PRO-STACK 2 Control Consoles are designed for use with DX Engineering PS-2 and PS-2B switches. They require 12 Vdc well-filtered at 2 amps (fused) minimum.
( 1 )
$195.99
DX Engineering PRO-STACK 3 Control Consoles
DX Engineering PRO-STACK Three Antenna Control Consoles, model DXE-EC-PS3, are custom made twelve-position rotary switch controls for manual operation of PRO-STACK Broadband Three Antenna Phasing Relay Units, models DXE-PS-3B and DXE-PS-3BDIN. DXE-EC-PS3 Control Consoles offer the following features: * Stainless Steel Housing * Non-Skid feet * On-Off toggle switch * Green LED power on indicator * Filter capacitors on each control line * Internal automatic resettable fuse * Includes a 2.1mm power plug for +12 V DC power connection Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DXE-EC-PS3 Control Consoles connect to the PRO-STACK Relay Units with 9-conductor control cable, or with 8-conductor cable plus ground using the coaxial cable shield as the ground return. These consoles were designed for the PS-3B series, but may be used for other applications which require a special BCD controller. See the EC-PS3 manual linked in the "Documentation" tab for detail on connections and the BCD truth table.
Not Yet Reviewed
$205.99
DX Engineering Aluminum Tubing
DX Engineering High-Strength Aluminum Tubes are ideal for your antenna building projects. It is made available in sizes that fit into and over the next, with close tolerances specifically designed for strength when joined and overlapping only by a few to several inches, to build Yagi, Moxon or vertical antenna elements. NOTE: This tubing is NOT intended for each size to telescope completely into the full length of the next; it cannot be used for telescopic mast building. DX Engineering aluminum tubing is manufactured to very close tolerances. This provides the greatest amount of surface contact between nesting tubes for mechanical and electrical stability. Due to the close tolerance, any burrs, dirt, grit or other foreign material, as well as dents, dings and unseen bending or crushing suffered during shipment will cause binding that prevents this aluminum tubing from fully nesting. 6063-T832 seamless drawn aluminum tubing is available in 3, 6 and 12 ft. lengths. 6063-T832 tubing provides good resistance to general corrosion, including stress corrosion cracking, and an excellent surface appearance. Use a series of 3 ft. lengths to build an element that tapers more quickly for lower wind-resistance applications. Use a series of 6 ft. lengths to make an element that tapers more slowly for greater strength and bandwidth. The 12 ft. lengths are great for HF Yagi construction. Most sizes (except 12 ft.) are available slit on one end for use with DX Engineering stainless steel element clamps. If un-slit ends are required for your applications, merely insert the slit end into the next larger size in the stack and use your own attachment method. 6063-T832 tubing features a 0.058 in. wall thickness and is available in 1/8 in. increments from 3/8 in. to 2-1/8 in. O.D. 3003-H14 drawn aluminum tubing features a 0.035 inch wall thickness and a 1/4 inch outside diameter. Each piece is supplied with non slit ends and is available in both 3 foot and 6 foot lengths, making them ideal for your antenna building projects. If your setup requires maximum strength at very long assembly lengths, then choose DX Engineering 6061-T8 tubing. This heavy-duty version features a 0.120 in. wall thickness and is available in 1/4 in. increments from 1-1/2 in. to 3 in. O.D. Packaged shipments of 6 ft. tubing have oversize shipping fees, regardless of the number of 6 ft. pieces. Therefore, order more 6 ft. pieces to spread oversize fees over more tubing for a more cost effective shipment. Tubing that is 12 ft. long MUST be shipped by truck freight. If you need many pieces of the same size in a 12 ft. tube length, then buying DX Engineering High-Strength Aluminum Tubing Bundles (elsewhere in our catalog) maximizes the economy of scale for your shipping costs. NOTE: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Order DX Engineering High-Strength Aluminum Tubing here.
( 137 )
$103.99
—
$137.99
DX Engineering Partsbox Storage Cabinets
DX Engineering Partsbox Storage Cabinets are the very handy place to store your DX Engineering Partsbox Storage Cases. They are available empty with just their sliding shelves, to load up with your individually purchased Partsbox separates along with our special coaxial and Anderson PowerPole connector Partsbox offerings. Or, you can buy these cabinets "loaded" with Partsbox empties. Partsbox Storage Cabinets are well designed with protrusions and indentations for interlocking multiple cabinets side-by-side and secure vertical stacking. Each cabinet is 15 1/2 x 16 x 14 1/2 in. (WHD). Each drawer holds each Partsbox Storage Case snugly and slides out 10 in. to allow the lid to open completely, one at a time, for easy access to your part and tools. Both Cabinet versions are here and the Partsbox offering are shown at Related Parts and in the Detail page at the Suggested Parts tab. Now your workbench and the shack can be super organized and cleaned up for company (or personal satisfaction). Get your DX Engineering Partsbox Storage Cabinets and Cases right here and now!
( 4 )
$219.95
DX Engineering Maxi-Core® 20 Baluns and Feedline Chokes
The present-day DX Engineering was launched in the year 2000. To celebrate our 20th Anniversary in the year 2020 we have developed a new line of Baluns and Feedline Chokes. Introducing DX Engineering "Maxi-Core® 20" Baluns and Feedline Chokes. They reduce or eliminate currents on the outside of your feedline allowing you to hear and to be heard much better. They keep more RFI/BCI out of your antenna and receiver and transfer more of your transmitted signal to the antenna for higher efficiency, the best antenna pattern and maximum performance. Signaling a new era of RF performance across the 1.8 to 54 MHz frequency range, DX Engineering Maxi-Core® 20 Baluns and Feedline Chokes handle full-legal-power-plus and provide higher common mode impedance (CMI) across a greater frequency range than competing models and even previous DX Engineering and Comtek models. Years of R&D coupled with major advancements in test equipment and techniques combined with custom ferrite materials have allowed our engineering team to design the DX Engineering Maxi-Core® 20 Baluns and Feedline Chokes. Maxi-Core® 20 Baluns and Chokes have high CMI across the AM Broadcast band and the HF/6M spectrum, which is essential to provide sufficient suppression of unwanted transmitted and received RFI/BCI current on the feedline shield exterior. Hear and be heard with DXE Maxi-Core® 20 Baluns and Feedline Chokes. Choose superior performance from these models: * DXE-MC20-1-1 Maxi-Core® 20 - 1:1 Current Choke Balun - For all HF-6m balanced antennas with a 50 ohm feedpoint, including resonant dipoles, loops, Yagis, beams, etc. * DXE-MC20-FC Maxi-Core® 20 - 1:1 Feedline Choke – This high CMI line isolator is perfect for use in line on 50 ohm coaxial feedlines, at the antenna, tower or shack end of the feedline. * DXE-MC20-1-1T Maxi-Core® 20 - 1:1 Current Choke Balun – This 1:1 "T" model is for force feeding antennas with a tuner. Use it at the end of ladder line of any impedance or mounted on a coax fed non-resonant antenna. This model tolerates operation at high SWR on non-resonant multi-band antennas. * DXE-MC20-C4-1 Maxi-Core® 20 - 4:1 Current Choke Balun is for use on antennas with a 200 ohm feedpoint and at the end of any impedance ladder line, especially on antenna systems with higher impedance. This model tolerates operation at high SWR on non-resonant multi-band antennas. * DXE-MC20-V4-1 Maxi-Core® 20 - 4:1 Voltage Balun is a 200 ohm to 50 ohm transformer for use on random long-wire and OCF antenna applications. This true voltage balun is intentionally designed with low CMI for antennas that need a transformer without RF choking for easier antenna tuner operation and it tolerates elevated SWR. Maxi-Core® 20 Baluns and Feedline Chokes are built into a convenient weather resistant NEMA enclosure that is mounted easily with optional brackets. They feature 1/4-20 stainless steel hardware and a high quality silver-plated PTFE dielectric SO-239 (UHF female) input connector. The SO-239 connector limits power handling to 5 kW at low SWR and reduced power at elevated SWR. These baluns and the feedline choke exhibit very low insertion loss and inherently low SWR. Optional mounting brackets are available for use on wire antennas or for verticals, Yagi and beam antennas. See the Suggested Parts tab after clicking "More Detail" on the model of interest. Combination packages that include balun or choke and mounting bracket are also available.
( 141 )
$141.99
—
$169.99