Selected Filters


Availability


6 Results Found For "75 ohm coax"

Part Groups

Results 1 - 6 of 6

DX Engineering 75 ohm Coaxial Lightning Surge Protectors

DX Engineering 75 ohm Coaxial Lightning Surge Protectors feature a unique design that is impedance-matched to 75 ohms and are virtually transparent to all analog or digital bi-directional signals from DC to 1.0 GHz. Manufactured by Tii Network Technologies for DX Engineering, their patented proprietary coaxial gas tube surge protectors are equipped with an integral failshort mechanism for a power-cross condition, which shunts both the coaxial cables' center conductor and sheath for a common path to ground. The dc breakdown voltage of the protector provides superior protection against transient surges, and yet is compatible with network-powered applications. They may also be used in 75-ohm receive systems up to 1.0 GHz. The protection element is designed to reset after each over-voltage event and the metallic housing of the coaxial lightning surge protectors provides necessary EMI shielding. When properly connected, DX Engineering Coaxial Lightning Surge Protectors are environmentally sealed (15 psi) to prevent the ingress of moisture and humidity encountered in broadband pedestals, vaults and stand-alone receive antenna applications. Full 360 degree Type F connectors provide superior RF performance and tighter connections.

5.0 out of 5 stars ( 9 )

$39.99

DX Engineering RG-6/U 75-ohm Quad-Shield Coax Cable Assemblies

Our new DX Engineering RG-6/U 75-ohm Quad-Shield Coaxial Cable Assemblies are constructed from our own premium DX Engineering brand RG-6/U 75 ohm cable and superior quality weather-sealed nickel-plated compression F connectors. Their best-in-class design reduces loss and provides greater protection against electromagnetic interference. Available in specific lengths between 3 ft. and 200 ft., these pre-assembled cables with F connectors are your most convenient ultra-high quality RG-6/U cable solution. These RG-6/U cable assemblies are ideal for many applications such as active or passive HF Amateur Radio receive antenna systems, magnetic loop antennas, Beverage antennas, over the air TV reception, FM broadcast reception, CATV systems, raw video distribution and satellite radio installations like Sirius/XM. In fact, their low-loss characteristics are excellent up to the microwave frequencies that Satellite Radio systems employ! Our RG-6/U cable assemblies have gas-injected polyethylene foam dielectric for flexibility and moisture resistance. Their 18 AWG center conductor is copper-clad steel and is durable in the extreme. They have two foil shields plus two high-density aluminum braids for ultimate four-layer RF shielding. Their UV protected black exterior jacket is tough PVC (polyvinyl chloride). DX Engineering RG-6/U cable impedance is 75 ohms with an 83 percent velocity factor and have a minimum bend radius of 2.50 in. This is absolutely the best RG-6/U cable available and it's RoHS compliant! Look at these attenuation figures per 100 ft.: 5 MHz: 0.6 dB 30 MHz: 1.1 dB 55 MHz: 1.6 dB Are you installing or upgrading any receiving antenna or video distribution system that uses RG-6/U cable? If so, then these exceptional DX Engineering RG-6/U 75-ohm Quad-Shield Coaxial Cable Assemblies will make your installation easier and your results so much better!

5.0 out of 5 stars ( 13 )

$28.99

—

$49.99

Clearance

DX Engineering F6 75-ohm Coaxial Cable Assemblies

DX Engineering F6 75-ohm Coaxial Cable Assemblies are intended to be used for HF receive antenna systems as well as for cable or satellite TV system use. They are made with a high-quality, 75-ohm, direct-bury, "flooded" F6-type coax and watertight Snap-N-Seal F connectors. Flooded-style feedline, infused with a waterproof compound, have the distinct advantage of automatically sealing small accidental cuts or lacerations in the cable jacket. Plus, the flooding compound works perfectly with the Snap-N-Seal connector's O-rings to provide a reliable, environmentally sealed connection that prevents shield contamination, with no external waterproofing requirement. These low-loss cable assemblies feature a waterproof polyethylene jacket, dual shields, and connectors that are installed with a unique 360 degree radial compression system. A superior RF integrity of over -95 dB external signal rejection means that DX Engineering F6 75-ohm Coaxial Cable Assemblies are your best choice for any high performance system installation.

Not Yet Reviewed

$28.99

—

$29.99


$20.29

—

$20.99

DX Engineering EX6XL Type-F Universal Compression Connectors

DX Engineering EX6XL Type-F Universal Compression Connectors work on all RG6U coaxial cables, solving the problems of trying to identify cable type and figuring out which compression connector to use. This connector's unique design fits any RG6 and RG6U coaxial cables, standard or self-healing (flooded). They install onto RG6U 60% braid, dual shield, such as RG-6U and F-6, including legacy DXE-F6 and DXE-6UF, as well as all Quad Shield RG-6U including DXE-RG6UFQ and DXE-RG6UQ. These F connectors have a long, rugged metal body, heavy duty black plastic and are direct replacements for all previous blue and purple F connectors. They are easily installed with common F-connector installation compression tools including DXE-SNS-CT1. Features of the DX Engineering EX6XL Type-F Universal Compression Connectors: - O-ring is a redundant seal and is always compression sealing, regardless of torque - Large tapered compression area creates a redundant moisture-tight interface - Three circumferential gaskets seal the body to the post - Gas-tight seal connection between the nut and the post Specifications: Bandwidth: 0 to 3 GHz Impedance: 75 ohm (nominal) Return Loss: Minimum -30 dB to 3 GHz Insertion Loss: Less than .10 dB to 3 GHz Operating Voltage: 90 V (at 60 Hz continuous AC) Operating Temperature:-40 F to + 140 F (-40 C to 60 C) Cable Retention: 45 lbs. (20.41 kg) minimum Meets or exceeds all SCTE Specifications

3.33 out of 5 stars ( 6 )

$27.99

DX Engineering Termination Loads

DX Engineering Termination Loads are for use on receive devices, splitters and feedlines for operational and testing purposes. Two types are available in 5 packs: - 75 ohm Type-F connector - 50 ohm BNC connector

Not Yet Reviewed

$22.99

DX Engineering F6 Cable Tool Cases

DX Engineering F6 Cable Prep Tool Cases keep your 75-ohm F-6 coaxial cable prep tools in one secure case. These rugged, lockable cases are lined with a precut foam insert to provide a home for each tool. Keep your tools together, protected, and out of sight with DX Engineering F6 Cable Prep Tool Cases.

Not Yet Reviewed

$31.99

  • 1
  • Page 1 of 1