Selected Filters


Availability


14 Results Found For "Choke"

Part Groups

Results 1 - 14 of 14

DX Engineering Balun or Choke Mounting Plate and Bracket Kits

DX Engineering Balun or Feedline Choke Mounting Plate and Bracket Kits provide a variety of mounting solutions for DX Engineering Maxi-Core® 20, Comtek and other brands that use 4 x 4 x 2 in. plastic NEMA boxes. This rugged polymer plastic plate and stainless steel bracket kit may be used at the base of any vertical, on the boom of a Yagi or beam antenna, or even on a mast or post. This unique perpendicular mount provides a beneficial separation between the ferrite of the balun or choke and the metal tubing of the antenna or mount, resulting in improved choking performance. This UV black high-strength polymer mounting plate provides additional isolation between the feedline and the antenna system for optimal performance and decoupling. The stainless steel mounting bracket has holes laser cut for any one of these optional heavy-duty DX Engineering V-Saddle Clamps. Choose based on the outside diameter (OD) of your antenna mounting pipe or boom tubing: -DXE-CAVS-11P for 1/2 to 1-3/4 in. aluminum tubing -DXE-CAVS-2P for 1 to 2 in. aluminum tubing -DXE-CAVS-3P for 2 to 3 in aluminum tubing -DXE-SSVC-2P for 1 to 2 in. for steel pipe -DXE-SSVC-3P for 2.375 to 3 in. steel pipe No optional clamps are necessary when attaching this Mounting Plate and Bracket Kit to a 4x4 or 6x6 wooden post for vertical. Use two suitable wood lag bolts or carriage bolts from a local hardware. DX Engineering Balun or Feedline Choke Mounting Plate and Bracket Kits are the right choice to mount a DX Engineering Maxi-Core® 20 Balun or Feedline Choke onto a vertical or beam antenna.

5.0 out of 5 stars ( 4 )

$37.99

DX Engineering TWIG QRP 1:1 Choke Baluns

DX Engineering TWIG QRP 1:1 Choke Baluns were engineered as the key component for building a low power (QRP) dipole antenna. Ideal for use during outdoor adventures such as POTA® or SOTA, or any portable operation. The TWIG incorporates a 1:1 transformer to keep the feedline impedance of the half-wave element wire down to 50-ohms. The connector is a BNC female and matches up with the recommended coax and most low power (QRP) transceivers. When properly installed and the element wire is accurately tuned, the system can achieve an SWR below 2:1 without the need for an external antenna tuner, reducing the amount of extra equipment required. The TWIG 1:1 is rated for 25W SSB, 10W CW, and 5W digital.

Not Yet Reviewed

$49.99

DX Engineering Balun and Feedline Current Choke Mounting Kits

DX Engineering Balun and Feedline Current Choke Mounting Kits allow you to mount a legacy "metal case" DX Engineering balun or feedline current choke at the base of any vertical antenna. This original mounting plate is not drilled for the Maxi-Core 20 Baluns and Feedline Chokes released in February 2020. Please see DXE-MC20K-BRKT to mount the plastic NEMA box models. For the older metal case models, this polymer mounting plate is isolated from the rest of the vertical ground system for best performance and decoupling. The mounting brackets were designed to utilize DX Engineering's V-bolt DXE-CAVS-1P saddle clamps, to mount the bracket onto a 1/2 to 1-3/4 in. ground pipe which mounts the balun or choke horizontally. Also available are the heavy duty DXE-CAVS-11P for 1/2 to 1-3/4 in. aluminum pipe and DXE-SSVC-2P for 1 to 2 in. steel pipe. V-bolt saddle clamps are not included and will need to be purchased separately if you choose to mount your bracket to a ground pipe. If you are mounting to a 4x4 or 6x6 wooden post, then no clamps are necessary--simply use 2 suitable wood screws. These kits work with any DX Engineering balun or choke with a formed-aluminum enclosure. Each kit includes a polymer mounting plate, aluminum adapter brackets, and stainless steel mounting hardware. Mounting clamps are sold separately. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. This is the legacy DX Engineering Balun and Feedline Current Choke Mounting Kits for the metal case baluns and feedline current chokes.

5.0 out of 5 stars ( 1 )

$28.99

DX Engineering Wire Antenna Balun Mounting Brackets

DX Engineering Wire Antenna Balun Mounting Bracket Kits are custom designed specifically for mounting high-performance Maxi-Core® 20 Baluns or legacy Comtek baluns. These kits include the virtually unbreakable combination balun mounting frame and wire antenna center insulator bracket, two DX Engineering End Insulators plus all stainless steel hardware. This unique design provides minimum capacitive coupling between the antenna wire and the field surrounding the balun core. Wire Antenna Balun Mounting Bracket Kits are the ideal starting point for building a top-performing and long-lasting coaxial cable fed single-band or multi-band wire antennas. Use a DX Engineering Maxi-Core® 20 Balun or Comtek balun, or other manufacturer's similar NEMA box balun, for a resonant or off-center fed dipole, inverted-V or loop. Use the optional coaxial cable strain relief (DXE-CSR213-1 for RG-213 or RG-8U sized coax or the DXE-CSR8X-1 for RG-8X sized coax) with your optional dipole wire (DXE-ANTW Antenna Wire) and antenna rope, all from DX Engineering. These patented** balun wire antenna insulator brackets and end insulators are made from a super high-strength UV resistant black poly-resin compound. They provide an exclusive serpentine wire-weave grip for insulated antenna wire. This method of threading the wire provides a grip strong enough to permanently support the antenna wires without the need for soldered wrapped wire ends onto the antenna wires. This allows fast and easy field adjustments of antenna length for tuning without soldering. Get everything you need to build the best performing, longest lasting wire antenna possible, all from DX Engineering! DX Engineering Wire Antenna Balun Mounting Bracket Kits DXE-WA-BMB: 1 ea. Balun & Wire Antenna bracket High-strength UV black poly-resin (** US Patent # D744,459) 2 ea. DX Engineering End Insulators High-strength, UV poly-resin (**US Patent # D534,905) 4 ea. 6-32 x 3/4" long Stainless Steel Hex Head Bolts 8 ea. #6 Stainless Steel Flat Washers 4 ea. 6-32 Nyloc Hex Nuts Click "More Detail" to see the "Documentation" tab for additional product information and the "Suggested Parts" tab for the additional items (not supplied) for your resonant wire antenna project with the DX Engineering Wire Antenna Balun Mounting Bracket Kit.

4.86 out of 5 stars ( 22 )

$29.99

DX Engineering Low Power Balun Center Insulators

DX Engineering LPB-B Low Power Balun Center Insulators feature an amazing Hi-CMI 50-ohm 1:1 Balun built onto a Center Insulator board, and a BNC female right-angle connector pre-installed. Designed for portable operations on HF bands, these baluns let you join the fun of making a high-performance Single Band or Multi-Band Linked Dipole! This coax wound toroid achieves an amazing common mode impedance (CMI) curve, with an RF choking capability that far exceeds 'a-few-beads-on-coax' products that are offered by other suppliers, and they can handle up to 250 watts on SSB voice, or 100 watts or less on CW or Digital modes on frequencies below a 2:1 SWR. They are designed for building a center supported Inverted Vee Dipole (not end supported) and are great for use with DX Engineering Nomad Portable Telescopic Masts (sold separately). Great for POTA, SOTA and JOTA, low-cost DIY Low Power Balun Center Insulators are ready for use on a monoband resonant or link-clip multi-band resonant wire antenna for portable or long-term temporary operations. These Low Power Balun Center Insulators are the heart of the DX Engineering Low Power Portable Dipole and Winder Kits.

Not Yet Reviewed

$49.99

DX Engineering Mounting Brackets for Baluns

DX Engineering Mounting Brackets for Baluns are custom-made, patented* adapter plates. They accommodate your DX Engineering Maxi-Core® 20 Baluns and Chokes, for mounting on a boom or mast of an antenna. These UV resistant poly-resin balun mounting brackets also fit legacy Comtek Baluns and other manufacturers' similarly packaged, NEMA box baluns. These kits include stainless steel mounting hardware for only the balun. Choose a pair of specific optional ECLS series band clamps with studs, sold in pairs, required to mount these Mounting Brackets onto a boom, a mast or pipe, in sizes ranging from 1/2 in. through 3-1/4 in. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. *U.S. Patent Number D597086

5.0 out of 5 stars ( 5 )

$20.99

DX Engineering TWIG QRP 9:1 UNUNs

The DXE-TWIG-9-1 QRP UNUN (Unbalanced-to-Unbalanced transformer) matches a high-impedance, non-resonant end-fed/random wire antenna (33 to 84 feet long) to the 50-ohm unbalanced load required by amateur radio transceivers. The DXE TWIG-9-1 covers 1.8–30 MHz and is ideal for portable (QRP) or HOA-restricted antennas. The connector on the DXE-TWIG-9-1 is a BNC female to mate with the recommended 35 to 50 feet of coax cable, which is used as the counterpoise. In some cases, an external wide range tuner may be needed. This UNUN may not provide a perfect 1:1 SWR on all bands without an additional tuner and may experience heating at higher power due to impedance mismatches. Typically, 9:1 UNUNs are used for: • Random Wire Antenna: Long wires of specific non-resonant lengths (e.g., 29, 35.5, 41, or 71 feet) designed to avoid an electrical half-wave, or multiple of a half-wave, on any amateur band. • End-Fed Long Wire: General-purpose long wire used for wideband receiving or multiband transmitting where an antenna tuner is available. • Inverted "L" or Sloper Configuration: When these are fed as non-resonant wires rather than resonant half-wave radiators. Tips on How to Use the 9:1 QRP UNUN as a Random Wire Antenna 1. Select a "Random" Length: Do not use resonant half-wave lengths. Popular lengths that avoid resonance on amateur bands include e.g., 29, 35.5, 41, or 71 feet. 2. Connect the Antenna Wire: Attach your long wire to the element wire terminal of the UNUN. 3. Use an Antenna Tuner: Because a random wire is never perfectly resonant, you may have to use an internal or external antenna tuner to achieve a low SWR for your transceiver. 4. Placement: Mount the UNUN near the ground or on a short support and run the element wire as high and clear of obstacles as possible. The antenna shown in this manual was tested using the optional 24 or 26 AWG wire such as CEW-VIZ24-YEL100 stranded copper, PVC insulated, high visibility yellow antenna wire. The coax cable (with BNC connectors) is recommended to be 35 to 50 feet in length since the coaxial cable shield is used as the counterpoise. The antenna can be installed in different configurations. Wire lengths will vary depending on the installation and antenna design chosen. This is a low power (QRP) antenna system impedance matching UNUN which handles 25 Watts on SSB, 10 Watts on CW and 5 Watts on digital mode when the antenna SWR is less than 2:1 without the use of an antenna tuner.

Not Yet Reviewed

$49.99

DX Engineering Replacement Ceramic Insulators

DX Engineering replacement ceramic insulators are designed for use with DX Engineering baluns. They are manufactured from quality materials and include one gasket for installation. These through-panel ceramic replacement insulators have a diameter of 1.250 in. and are 0.813 in. tall without the metal hardware (not included). They are also very suitable for homebrew projects and as replacements in special applications such as vintage transmitters or trans-matches. For the best in porcelain insulators, DX Engineering Replacement Ceramic Insulators are the ones to use!

Not Yet Reviewed

$23.99

YCCC Receive Feedline Choke Kits

Closeout- Other YCCC array components are no longer available YCCC Receive Feedline Choke Kits prevent common-mode noise or unwanted signal intrusion on the feed lines of YCCC Receive Vertical Array Kits. These choke kits are the same as provided in the array kit packages and may be used as replacements or in other applications. Component-level assembly of these kits is required. A choke enclosure is user supplied. Their function is to provide isolation between the input and output coaxial shield connections, while passing desired receive or control signals. Their isolation impedance blocks common-mode noise or unwanted signals. YCCC Receive Feedline Choke Kits are supplied with standard "F" female connectors to prevent connection to transmitting equipment. All inquiries and technical support for the discontinued YCCC kits and kit packages is handled by e-mail only, typically within two to three business days: yccctechsupport@verizon.net

Not Yet Reviewed

$22.00

DX Engineering Receive Device Replacement Parts Kits

DX Engineering Receive Device Replacement Parts Kits contain RF chokes and capacitors that are commonly found in bias tee circuits and in many other receiving and control devices. Also known as feedline voltage injectors, bias tee circuits occasionally suffer minor lightning pulse damage. Typically the choke or capacitor is burned out, which can be easily repaired with one of these replacement parts. Contained in each kit are 30 electronic components: • 10 each 100uH RF chokes • 10 each 0.1uF 50V capacitors with 0.2 in. leg spacing • 10 each 0.1uF 50V capacitors with 0.3 in. leg spacing. Click "More Detail" to see the DX Engineering device compatibility chart. Several DX Engineering devices use only one of these parts. None of the devices listed require all three parts; this is a multi-purpose package for the repair bench. These common electronic parts may be used for many other projects around the shack and in station gear, and even for repair of other types of equipment. Use these parts at your own discretion. Technical support for any application is not included.

Not Yet Reviewed

$22.99

DX Engineering Ferrite

DX Engineering Ferrites are partially magnetic metal and ceramic mixes available in a variety of forms, including toroid core, bead type and plastic-covered split-bead ferrite called snap-beads. They are used in a myriad of RF suppression applications to mitigate RFI (radio frequency interference) as well as to reduce pulse and other types of RF noise interference. Special ferrites are used for experimentation and electronic circuit building and for making transformers, RF chokes and antenna baluns. The variations of magnetic and non-magnetic metals and non-metal ceramics used to make ferrites are called "Mixes" and each has different radio frequency properties or ranges. Therefore, different mix number ferrites are typically used for different applications within those ranges, determined by decades of experiments by engineers and applications by hams. Each Mix has been assigned a color code to help identify the ferrite, so numerical labeling is not used on the metal. Color coded ferrite can be identified long after the numbered package is discarded or has disintegrated with time. How do they work? Simply use snap-on beads on a cable or wire. An even more effective choke takes a few to several turns of a wire or cable through and around a ferrite snap-on bead or toroid core. This mitigates RFI to, or from, the connected RF noise producing or noise affected electronic device. The results can be very surprising. Solving noise and RFI can be frustrating. Due to the nature of RF and noise interference suppression; the techniques of appropriate use of ferrites can take a bit of trial and error, but are often the best solution for a difficult problem. Use DX Engineering Ferrite for an incredible range of electronic circuits, noise abatement and RF suppression projects. The details of DX Engineering Ferrite mixes and types appear in each product description. Sizes and applications are discussed in "More Details" and in the literature available at the "Documentation" tab of each of these products.

4.88 out of 5 stars ( 198 )

$27.99

—

$49.99

DX Engineering TWIG End Fed Half Wave QRP Antenna Feedpoint Kits

DX Engineering TWIG End Fed Half Wave QRP Antenna Feedpoint Kits are a compact, essential component for building a low-power (QRP) end-fed half-wave antenna system. Perfect for portable operations and outdoor activities such as POTA® or SOTA™, this feedpoint kit simplifies setup while delivering reliable performance. The TWIG is rated for 25W SSB, 10W CW, and 5W Digital modes, delivering an SWR of less than 2:1 without an antenna tuner. At its core, the TWIG features a 49:1 transformer that matches the impedance of the user supplied half-wave element wire to 50-ohms, ensuring compatibility with most QRP transceivers. The BNC female connector pairs easily with recommended coax cables, and when the element wire is properly tuned, no external tuner is required—reducing the amount of gear you need to carry. The kit includes a built-in quick connector designed for 24/26 AWG antenna wire, making element installation fast and secure. Two end insulators and clips are also provided, ensuring reliable strain relief and easy attachment of the antenna wire in the field. Installation is quick and straightforward, allowing you to get on the air fast and start making contacts. No additional counterpoise wire is necessary; the coax cable serves that function when installed correctly. For best results, use optional 24/26 AWG wire such as CEW-VIZ24-YEL100, a high-visibility, PVC-insulated stranded copper wire. A typical setup uses a sloper configuration, with the feedpoint about 6–7 feet above ground and the wire sloping upward to 25–30 feet. Recommended coax length is 25–35 feet with BNC connectors and adding an optional DXE-LPFC-BNC Feedline Choke at the transceiver end is suggested. While the antenna supports multiple configurations, wire length will vary based on installation.

5.0 out of 5 stars ( 1 )

$49.99

DX Engineering Flanged Feedpoint Connectors

DX Engineering Flanged Feedpoint Connectors provide a direct transition from coaxial cable to feedpoint for Yagi, Loop Fed Arrays (LFA), Rotatable Dipoles and other antennas that do not have a coaxial connector. The worry of failed weatherproofing at the end of a stripped coax is eliminated for the 50 ohm beam or loop antenna feedpoint with stud terminals. Flanged Feedpoint Connectors allow direct connection of a PL-259 or N male terminated coaxial cable. Only this Flanged version (FFPC) can be mounted using the optional bracket, Flanged Feedpoint Connector Mount (FFPM) and an optional studded band clamp or other clamp of choice. Two connector types are available in three versions: DXE-FFPC-SO239ZD UHF Female with 11 inch leads and color-coded heat shrink DXE-FFPC-SO239 UHF Female with 4 inch leads and color-coded heat shrink DXE-FFPC-N Type N with 4 inch leads and color-coded heat shrink Each Flanged Feedpoint Connector (FFPC) features silver-soldered solid tinned-copper 12 AWG wire leads to the silver-plated connector, which is epoxy potted into a plastic housing, 1.573 inch square and 0.787 inch deep, for a weather-sealed direct feedpoint connection. Each lead has color-coded heat shrink; Red is Center and Black is Shield. Additional weatherproofing should be applied to the male-female connector junction, as recommended. DX Engineering Flanged Feedpoint Connectors two wire leads are about 4 in. each, or 11 in. each for the ZD version. A longer length of wire can be soldered to these tinned wires, if required, but keep in mind that increasing connection spacing drives up feedpoint impedance, which could increase the possibility of mismatch on an antenna that has a 50 ohm feedpoint. Flanged Feedpoint Connectors are ideal for phased antenna pairs or multiples, on which a coaxial cable ferrite RF bead choke is desired at the feedpoint, in place of a traditional enclosure balun. The top performing 40-bead DXE-FBC Ferrite Bead Choke fits on 0.405 in. diameter coax cable, like RG-213U and RG-8U, prior to connector installation. For the 50 ohm beam or loop antenna feedpoint with stud terminals, the DXE-FFPC-SO239, DXE-FFPM and DXE-FBC are THE perfect combination of feedpoint connection, mounting and RF choke.

5.0 out of 5 stars ( 5 )

$46.99

Clearance

DX Engineering Feedpoint Connectors

DX Engineering Feedpoint Connectors provide a direct transition from coaxial cable to feedpoint for Yagi, Loop Fed Arrays (LFA), Rotatable Dipoles and other antennas that do not have a coaxial connector. Three Feedpoint Connector types are available; SO-239 UHF Female, Type-N Female and 7-16 DIN Female. Each Feedpoint Connector (FPC) features silver-soldered solid tinned-copper 12 AWG wire leads to the connector, which is epoxy potted into a plastic housing, 1.573 inch square and 0.787 inch deep, for a weather-sealed direct feedpoint connection. Of course, additional weatherproofing should be applied to the male to female connector junction, as is typically suggested. DX Engineering Feedpoint Connectors' two wire leads are about 4 in. each, for connection to balanced driven elements of beams and rotatable dipoles on which a coaxial connector does not exist. A longer length of wire is easily soldered to these tinned wires, if required, but increasing connection spacing drives up feedpoint impedance and increases the possibility of mismatch. FPCs are ideal for antennas, especially phased antenna pairs or multiples, on which a coaxial cable ferrite RF bead choke is required at the feedpoint, in place of a traditional enclosed balun. DXE-FPC units do not have mounting clamps, straps or holes. They are intended to be supported by the coax cable attachment to the boom or mast and by the connections to the antenna. An appropriate center insulator kit, such as the DXE-UWA-KIT and coaxial cable strain relief, DXE-CSR213-1, can accommodate the use of Feedpoint Connectors SO-239 UHF Female, Type-N and 7-16DIN for specialized and high power wire antennas, also accommodating a ferrite RF Bead Choke on the RG-213U size coax cable, 0.405 in. diameter.

4.0 out of 5 stars ( 8 )

$46.99


$37.59

  • 1
  • Page 1 of 1