Selected Filters


Availability


12 Results Found For "Choke"

Part Groups

Results 1 - 12 of 12

DX Engineering LPFC-BNC Low Power Feedline Chokes

DX Engineering LPFC-BNC Low Power Feedline Chokes are intended to be placed in line with coaxial cable fed antennas and equipment used for portable operations, including POTA and SOTA activations. The DXE-LPFC-BNC coax wound toroid achieves an amazing common mode impedance (CMI) curve, with an RF choking capability that far exceeds the CMI of 'a-few-beads-on-coax' product that is offered by other suppliers. Actually, these "Low Power" Feedline Chokes can be used in any station that runs less than 250 watts SSB, 100 watts CW or Digital. ________________________________________ DX Engineering Low Power Feedline Chokes features and benefits: - A unique, lightweight form, with clear heat shrink over the choke* - Light enough to hang inline at the feedpoint of any portable HF antenna. - BNC female connectors for easy connection to portable antennas and gear. - Much higher CMI that other portable, low power chokes, especially across the 40 through 6 meter bands. - Frequency range of 1.8 through 54MHz. - RF Power Handling up to 250 watts PEP SSB, 100 watts CW and Digital (at SWR <2:1). - Recommended for general use to isolate either end of a coaxial cable. * Not intended for permanent outdoor use unless mounted inside a weatherproof enclosure. ________________________________________ These chokes are ideal for use at any HF transceiver or receiver antenna connection, portable, mobile or base. In most cases, DXE-LPFC-BNC prevents RFI, stops stray RF and noise on the feedline from getting into the receiver that would cover up weak signals, and improves efficiency of the antenna system. For any station, including POTA and SOTA, mobile and base, DX Engineering Low Power Feedline Chokes keep the RF controlled.

Not Yet Reviewed

$59.99

DX Engineering Bead Choke Standoff Kits

DX Engineering Bead Choke Standoff Kits bring a practical solution to a serious problem when ferrite chokes are placed directly onto the metal boom at the feedpoint of beam antennas. A number of Amateur Radio operators and antenna engineers have known for years about the superior choking function of many ferrite toroids beads placed directly on the coaxial cable, as compared to standard feedpoint baluns. A more recent revelation is that the proximity of ferrite beads on coax taped to the aluminum boom of the antenna drastically reduces their effectiveness. DX Engineering Bead Choke Standoff Kits are mounting systems, made of fiberglass or acetyl standoff rods (color varies), PVC carriers and stainless steel hardware, available in four versions. Two sizes of PVC cradle tubes handle two different types of RF bead chokes; 3/4 inch outside diameter (OD) ferrite beads on RG-400 size cable, and 1 inch OD ferrite beads on RG-213 size 0.405 in. coax cable. Each are offered with two different boom size clamps, 2 inch OD and 3 inch OD. Bead Choke Standoff Kits simply hold an RF bead choke and feedline 4 inches away from the metal beam antenna boom (or 4 inches away from the metal mast for a dipole). They maintain the optimal choking performance of ferrite beads on coax. Using DX Engineering Bead Choke Standoff Kits, ferrite bead chokes function at peak performance for these key results: • Prevent feedline radiation of RF • Preserve current balance for proper beam antenna pattern • Prevent feedline shield exterior collected noise and signals from entering the antenna and interior of the feedline, resulting in lower noise floor and enhanced reception The absolute superiority of RF chokes made of many beads on the feedline, over the traditional enclosure balun, is becoming better understood in Amateur Radio. They achieve the best possible RF isolation of the feedline from the antenna and provide completely balanced currents at the feedpoint. Plus, they provide quieter reception with reduction of common-mode noise. Keeping Bead RF Chokes away from metal preserves the optimal function of this method of antenna feedpoint current balance and isolation. This mechanical requirement is simple and practical with DX Engineering Bead Choke Standoff Kits.

5.0 out of 5 stars ( 3 )

$52.79

—

$65.99

DX Engineering TWIG QRP 4:1 Current Baluns

The DXE-TWIG-4-1C QRP Current Balun is designed to be used as the feedpoint of a very low power (QRP) Off Center Fed dipole (OCF) antenna. Ideal for use during outdoor adventures such as POTA® or SOTATM, or any portable operation. The TWIG-4-1C incorporates a 4:1 transformer to convert the OCF antenna impedance of 200-ohms to the desired 50-ohms to match the coaxial cable feedline. It also has a 1:1 feedline choke, to prevent current imbalance, detuning, and to help prevent the addition of unwanted noise. The connector is a BNC female and mates with the recommended coax and most low power (QRP) transceivers. When properly installed and the element wire is properly tuned, you should not need an external tuner. This reduces the need to bring more equipment than is necessary or a portable operation and provides higher efficiency of your output signal and instant band changes. The antenna shown in this manual was designed and tested using the optional 24 AWG wire such as CEW-VIZ24-YEL100 stranded copper, PVC insulated, high visibility yellow antenna wire. The BNC connectors coax cable is recommended to be at least 25 to 35 feet in length. The antenna can be installed in different configurations of wire lengths for various band selections. For example, a very common TWIG QRP OCF for 40, 20, 15 and 10 meters has one 57 ft. dipole wire and the other wire is 12 ft. See the chart in the Instruction Manual linked below for details. This is a low power (QRP) antenna system balun which handles only 25 Watts on SSB, 10 Watts on CW and 5 Watts on digital mode when antenna SWR less than 2:1, without the use of an antenna tuner.

Not Yet Reviewed

$69.99

DX Engineering High CMI Receive Feedline Chokes

DX Engineering High CMI Receive Feedline Chokes achieve exceptionally high isolation between the input and output connector shields to effectively block common-mode RF noise and unwanted signals that collect on 50 or 75 ohm receive antenna feedlines. Ongoing research and development by the design team at DX Engineering has produced two bidirectional Receive Feedline Chokes; a 50-ohm model with BNC female connectors and a 75-ohm model with Type-F female connectors. Both chokes cover the RF frequency range 100 kHz through 30 MHz. They exhibit very high common mode impedance* (CMI typically over 8,000 ohms across the 160, 80, and 40 meter bands) and feature DC pass capability up to 700 mA at 13.8VDC, with extremely low SWR and negligible insertion loss. Affordable DX Engineering High CMI Receive Feedline Chokes will be considered the best, most versatile receive chokes ever produced for typical low band receive antenna applications.

5.0 out of 5 stars ( 3 )

$59.99

—

$64.95

DX Engineering ISO-PLUS Ethernet RF Filters

DX Engineering ISO-PLUS Ethernet RF Filters are very effective EMI Suppressors that are quickly and easily connected inline on Cat5e or Cat6 network cables. Their patented* design provides common mode RF interference and EMI noise filtering of radio frequencies from well below 1 MHz to 100 MHz and beyond. DX Engineering ISO-PLUS Ethernet RF Filters have no effect on throughput; Ethernet data signal levels and speed remain unchanged. *US Patent No. 11,211,679 B2 Electromagnetic interference (EMI), also known as RF interference (RFI), can be imposed onto your received radio and data signals from many electronic devices normally found around a residence, a radio room or a business network. Areas of major concern are the Gigabit Ethernet Cat5(e) and Cat6 cables used for network (LAN) connections between personal computers, printers, multi-port switches, cable modems, routers and radio transceivers, and between many other devices. DX Engineering ISO-PLUS RF filters, installed on both ends of Ethernet cables, work two ways. First, they can mitigate RF interference caused to the Ethernet connected device. Second, they can reduce interference to radio receivers and other Ethernet devices that is caused by RFI or EMI generated by an Ethernet connected device. ISO-PLUS filters are sold in pairs and are normally installed at each end of an Ethernet cable; one filter at the RJ-45 Ethernet plug of the first device and the other filter at the RJ-45 Ethernet plug of the second device. Each ISO-Plus comes with one six inch shielded RJ-45 patch cable (color may vary). They are designed to be installed in pairs; offered in a 2 filter package DXE-ISO-PLUS-2 or a 10 filter package DXE-ISO-PLUS-10. Click "More Details" below for additional information. DX Engineering ISO-PLUS Ethernet RF Filters are an important tool to improve productivity and radio reception of weak signals. "If you can't hear them, you can't work them." Order ISO-PLUS Ethernet RF Filters exclusively from DXEngineering.com

4.63 out of 5 stars ( 49 )

$81.99

DX Engineering TWIG QRP Monoband Dipole Antenna Kits

DX Engineering TWIG QRP Monoband Dipole Antenna Kits provide everything needed to build a lightweight, low-power (QRP) standard Dipole antenna using the DXE-TWIG-1-1 QRP Choke Balun. Designed for portable operating, these kits make it easy to assemble an efficient monoband dipole antenna for outdoor activities such as POTA® and SOTA®, as well as other field and portable operations. This antenna kit comes with enough wire to operate on any single band, 40 through 10-meters, depending upon the length of wire cut for both legs of the dipole according to the included instructions. When properly constructed and supported with the center feedpoint at least 15 feet above ground, this antenna is rated for 25 watts SSB, 10 watts CW, and 5 watts digital modes. DX Engineering TWIG QRP Monoband Dipole Kits Include: • (1) DXE-TWIG-1-1 QRP Choke Balun • (2) DXE Lightweight Wire Winders • (2) End Insulators • (4) Bongo Ties • (3) Hanging Clips • (2x35ft.) 24 AWG PVC Insulated High-Viz Yellow Antenna Element Wire •(1) Instruction Manual

Not Yet Reviewed

$79.99

DX Engineering TWIG QRP Off Center Fed Dipole Kits

DX Engineering TWIG QRP Off Center Fed Dipole Kits provide everything needed to build lightweight, low-power (QRP) Off Center Fed Dipole (OCF) antennas around the DXE-TWIG-4-1C QRP Current Balun. Designed for portable operating, these kits make it easy to assemble efficient multiband antennas for outdoor activities such as POTA® and SOTA®, as well as other field and portable operations on the 40 through 10-meter amateur bands. When properly constructed, these antennas are rated for 25 watts SSB, 10 watts CW, and 5 watts digital modes. At the heart of these kits is the included DXE-TWIG-4-1C balun, which features a 4:1 transformer that converts the approximately 200-ohm impedance of an OCF antenna to the desired 50-ohm impedance required by standard coaxial feedlines. A BNC female connector provides compatibility with recommended coaxial cables and most QRP transceivers. When installed correctly and tuned to the desired operating bands, the included 24 AWG PVC-insulated, stranded copper, high-visibility yellow antenna wire typically eliminates the need for an external antenna tuner. This reduces the amount of gear operators need to carry into the field while allowing for quick band changes and improved operating efficiency. For best performance, a coaxial feedline with BNC connectors (sold separately) measuring approximately 25 to 35 feet is recommended. These antennas can be deployed in a variety of configurations, with final wire lengths varying based on the installation method and operating requirements.

Not Yet Reviewed

$77.99

DX Engineering Ferrite

DX Engineering Ferrites are partially magnetic metal and ceramic mixes available in a variety of forms, including toroid core, bead type and plastic-covered split-bead ferrite called snap-beads. They are used in a myriad of RF suppression applications to mitigate RFI (radio frequency interference) as well as to reduce pulse and other types of RF noise interference. Special ferrites are used for experimentation and electronic circuit building and for making transformers, RF chokes and antenna baluns. The variations of magnetic and non-magnetic metals and non-metal ceramics used to make ferrites are called "Mixes" and each has different radio frequency properties or ranges. Therefore, different mix number ferrites are typically used for different applications within those ranges, determined by decades of experiments by engineers and applications by hams. Each Mix has been assigned a color code to help identify the ferrite, so numerical labeling is not used on the metal. Color coded ferrite can be identified long after the numbered package is discarded or has disintegrated with time. How do they work? Simply use snap-on beads on a cable or wire. An even more effective choke takes a few to several turns of a wire or cable through and around a ferrite snap-on bead or toroid core. This mitigates RFI to, or from, the connected RF noise producing or noise affected electronic device. The results can be very surprising. Solving noise and RFI can be frustrating. Due to the nature of RF and noise interference suppression; the techniques of appropriate use of ferrites can take a bit of trial and error, but are often the best solution for a difficult problem. Use DX Engineering Ferrite for an incredible range of electronic circuits, noise abatement and RF suppression projects. The details of DX Engineering Ferrite mixes and types appear in each product description. Sizes and applications are discussed in "More Details" and in the literature available at the "Documentation" tab of each of these products.

4.88 out of 5 stars ( 198 )

$51.99

—

$99.99

DX Engineering 400MAX Type-N to PL-259 Low-Loss 50-ohm Coaxial Adapter Cable Assemblies

What if two RF devices – the radio, switch, meter, lightning protector, choke, balun or the antenna – have opposite female connectors, one type-N and the other SO-239? This dilemma is solved with the uniquely helpful DX Engineering 400MAX Type-N to PL-259 Low-Loss 50-ohm Coaxial Adapter Cable Assemblies, the perfect alternative to questionable straight adapters. Made for any job (HF, VHF and UHF) and especially for outdoors, one top-quality silver plated Type-N male connector and one patented* Next Generation PL-259 (UHF male) connector terminates our premium, low-loss 400MAX coaxial cable to create these very useful Adapter Cable Assemblies. DX Engineering 400MAX coax features a waterproof jacket made with a highly UV-resistant, Type III-A polyethylene which is ideal for all outdoor feedline applications, including direct-bury installations. With a large 10 AWG stranded copper center conductor, 400MAX NX Series low-loss assemblies are perfectly suited for short or long cable runs and low or high-power level operations. Our 400MAX coaxial cable also features modern, gas-injected foam polyethylene dielectric that cannot absorb moisture and has complete shielding with 100 percent coverage bonded aluminum tape covered by minimum 95-percent coverage tinned copper braid. Regarded in the industry as a top quality low-loss feedline, DX Engineering 400MAX Coaxial Cable is custom made to provide the highest performance and excellent longevity. Coaxial cables with foil-braid dual shielding or foam dielectric are optimized for stationary simplex antenna applications across HF, VHF and UHF. Note: DXE-400MAX is not recommended for use in repeater applications, VHF/UHF duplex, or for a beam antenna rotator loop. DX Engineering 400MAX PL-259 NX Series Coaxial Adapter Cable Assemblies are terminated at one end with the N-Type male connector and the other end with our custom-designed DX Engineering PL-259 (UHF male) connector. Both silver plated connectors feature machine-crimped shields with 360 degrees of complete mechanical and electrical contact for maximum reliability. PL-259 center pins are hand-soldered, and Type-N center pins are machine-crimped by trained assembly techs to assure a proper connection. Next Generation PL-259 connectors feature: * Full diameter, full-length soldered center pins that snugly fit even worn SO-239s * Spacious center pin inside diameter that accepts large conductors and allows generous solder flow * Deep, double-knurled threaded shells for secure finger tightening These high-quality PL-259s have all silver-plated brass shells and bodies with center pins securely mounted in PTFE dielectric for exceptional RF characteristics and power handling. Every assembly is continuity and Hi-Pot tested and then heat-shrink weather-sealed for the ultimate service longevity. You won't find this level of cable assembly quality anywhere else! 400MAX Type-N to PL-259 Low-Loss 50-ohm Coaxial Adapter Cable Assemblies are available in selected lengths and at any length in the Custom Cable Builder, only from DX Engineering! *U.S. Patent D745849

5.0 out of 5 stars ( 8 )

$55.99

—

$59.99

DX Engineering TWIG End Fed Half Wave QRP Antenna Kits

DX Engineering TWIG End Fed Half Wave QRP Antenna Kits include the essential components needed to build a lightweight, low-power (QRP) end-fed half-wave antenna for portable and field operations. Ideal for activities such as POTA® and SOTA™, these kits are designed for quick deployment, efficient operation, and minimal equipment requirements. When properly assembled and tuned, TWIG End Fed Half Wave QRP antennas deliver an SWR of less than 2:1 without the need for an antenna tuner and are rated for 25 watts SSB, 10 watts CW, and 5 watts digital modes. At the heart of these kits is a 49:1 transformer that matches the high feedpoint impedance of the half-wave radiator to a standard 50-ohm coaxial feedline. The integrated BNC female connector is compatible with recommended coaxial cables and most QRP transceivers. Once the included antenna wire is properly tuned for the desired operating band, an external tuner is typically unnecessary, reducing pack weight and simplifying field operation. No separate counterpoise wire is required, as the coaxial feedline serves this function when installed correctly. To simplify assembly and deployment, the kits feature a built-in quick-connect wire terminal designed for use with the included 24 AWG antenna wire. Two end insulators and attachment clips are also included to provide secure strain relief and convenient field installation. A DX Engineering wire winder and reusable Bongo ties help keep the antenna organized and compact when stored or transported. A typical installation uses a sloper configuration, with the feedpoint positioned approximately 6 to 7 feet above ground level and the antenna wire extending upward to a height of 25 to 30 feet. For optimum performance, a 25- to 35-foot coaxial feedline with BNC connectors is recommended. An optional DXE-LPFC-BNC Feedline Choke installed at the transceiver end of the coax is also recommended to help minimize common-mode current. While the antenna can be deployed in a variety of configurations, final wire lengths may vary depending on the installation method and operating requirements. User assembly is required. Recommended tools and materials include wire cutters, a tape measure, 3/16-inch diameter rope to hang the antenna, electrical tape, a suitable throwing weight for antenna installation, and an antenna analyzer for trimming and tuning the antenna element to the desired operating band.

Not Yet Reviewed

$77.99

DX Engineering Flanged Feedpoint Connectors

DX Engineering Flanged Feedpoint Connectors provide a direct transition from coaxial cable to feedpoint for Yagi, Loop Fed Arrays (LFA), Rotatable Dipoles and other antennas that do not have a coaxial connector. The worry of failed weatherproofing at the end of a stripped coax is eliminated for the 50 ohm beam or loop antenna feedpoint with stud terminals. Flanged Feedpoint Connectors allow direct connection of a PL-259 or N male terminated coaxial cable. Only this Flanged version (FFPC) can be mounted using the optional bracket, Flanged Feedpoint Connector Mount (FFPM) and an optional studded band clamp or other clamp of choice. Two connector types are available in three versions: DXE-FFPC-SO239ZD UHF Female with 11 inch leads and color-coded heat shrink DXE-FFPC-SO239 UHF Female with 4 inch leads and color-coded heat shrink DXE-FFPC-N Type N with 4 inch leads and color-coded heat shrink Each Flanged Feedpoint Connector (FFPC) features silver-soldered solid tinned-copper 12 AWG wire leads to the silver-plated connector, which is epoxy potted into a plastic housing, 1.573 inch square and 0.787 inch deep, for a weather-sealed direct feedpoint connection. Each lead has color-coded heat shrink; Red is Center and Black is Shield. Additional weatherproofing should be applied to the male-female connector junction, as recommended. DX Engineering Flanged Feedpoint Connectors two wire leads are about 4 in. each, or 11 in. each for the ZD version. A longer length of wire can be soldered to these tinned wires, if required, but keep in mind that increasing connection spacing drives up feedpoint impedance, which could increase the possibility of mismatch on an antenna that has a 50 ohm feedpoint. Flanged Feedpoint Connectors are ideal for phased antenna pairs or multiples, on which a coaxial cable ferrite RF bead choke is desired at the feedpoint, in place of a traditional enclosure balun. The top performing 40-bead DXE-FBC Ferrite Bead Choke fits on 0.405 in. diameter coax cable, like RG-213U and RG-8U, prior to connector installation. For the 50 ohm beam or loop antenna feedpoint with stud terminals, the DXE-FFPC-SO239, DXE-FFPM and DXE-FBC are THE perfect combination of feedpoint connection, mounting and RF choke.

5.0 out of 5 stars ( 5 )

$53.99

—

$55.99

DX Engineering Feedpoint Connectors

DX Engineering Feedpoint Connectors provide a direct transition from coaxial cable to feedpoint for Yagi, Loop Fed Arrays (LFA), Rotatable Dipoles and other antennas that do not have a coaxial connector. Three Feedpoint Connector types are available; SO-239 UHF Female, Type-N Female and 7-16 DIN Female. Each Feedpoint Connector (FPC) features silver-soldered solid tinned-copper 12 AWG wire leads to the connector, which is epoxy potted into a plastic housing, 1.573 inch square and 0.787 inch deep, for a weather-sealed direct feedpoint connection. Of course, additional weatherproofing should be applied to the male to female connector junction, as is typically suggested. DX Engineering Feedpoint Connectors' two wire leads are about 4 in. each, for connection to balanced driven elements of beams and rotatable dipoles on which a coaxial connector does not exist. A longer length of wire is easily soldered to these tinned wires, if required, but increasing connection spacing drives up feedpoint impedance and increases the possibility of mismatch. FPCs are ideal for antennas, especially phased antenna pairs or multiples, on which a coaxial cable ferrite RF bead choke is required at the feedpoint, in place of a traditional enclosed balun. DXE-FPC units do not have mounting clamps, straps or holes. They are intended to be supported by the coax cable attachment to the boom or mast and by the connections to the antenna. An appropriate center insulator kit, such as the DXE-UWA-KIT and coaxial cable strain relief, DXE-CSR213-1, can accommodate the use of Feedpoint Connectors SO-239 UHF Female, Type-N and 7-16DIN for specialized and high power wire antennas, also accommodating a ferrite RF Bead Choke on the RG-213U size coax cable, 0.405 in. diameter.

4.0 out of 5 stars ( 8 )

$86.99

  • 1
  • Page 1 of 1