Availability
DX Engineering Antennas
DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas
New Name...Same Antenna! DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas are designed for low-noise reception of signals within the frequency range of 100-kHz to 30-MHz. Their integral, extra-high dynamic range, low-noise preamplifier is designed for minimum intermodulation distortion in the presence of very high-level signals that would normally overload most preamplifiers. Read more about the exclusive Clifton Laboratories design of the loop's RF-30 preamplifier by clicking "More Details" below. RF-PRO-1B Active Magnetic Loop Antennas, formerly known as the "Pixel Loop" and recently as InLogis, are now manufactured and serviced by DX Engineering. For Amateur Radio operators, AM DXers and Short-Wave Listeners, these active loop antennas are a great way to extend your listening ability. Add DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas to your radios and start hearing more signals with less noise! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 26 )
$809.99
DX Engineering NCC-2 Receive Antenna Phasing Systems
Imagine adjusting the controls to knock out strong interfering stations or noise—and then being able to copy and log that weak DX station. By successfully combining the right antennas with the advanced phasing capabilities of the NCC-2, this is the operating thrill that every radio enthusiast can enjoy, again and again! DX Engineering NCC-2 Receive Antenna Phasing Systems are variable phasing controllers that combine the 300 kHz- 30MHz received signals from one transmit antenna and one receive antenna, or from two dedicated receive antennas. Combining signals from two stationary antennas physically spaced 1/10 to 1/2 wavelength apart creates an array pattern with signal peaks and dips called nulls. Adjusting the NCC-2 Phase and Balance controls have the effect of electronically rotating or steering that pattern. Steering the null direction to significantly weaken a local or distant interfering signal or noise is known as "Noise Cancelling." This "Noise Cancelling Controller" (NCC-2) can dramatically enhance the reception of weak signals from non-null directions. This "reverse-beam" capability on radio frequencies AM Broadcast through HF can provide amazing benefits for many types of AM DX and SWL receiving and ham radio operating. Work new DX, hear the weak station in casual regional conversations, snag the rare multiplier in contests and hear beyond the noise and interference in dire circumstances. DX Engineering NCC-2 Phasing Systems now feature the built-in RTR Receive-Transmit Interface relay system that expands the exciting benefits of antenna phasing for interference reduction in two ways: * First, the NCC-2 can combine signals from the HF transmit antenna and a separate receive antenna to effectively notch-out strong stations or noise. Almost any Amateur can now enjoy the benefits of antenna phasing and noise-nulling, even those with space limitations for separating the receiving and transmitting antennas. * Second, the user of any standard HF transceiver that lacks a separate receive antenna input can have enhanced reception of noise and signal nulling with the DXE-NCC-2 and two antennas. Rear panel SO-239, F and BNC connectors make the NCC-2 extremely versatile and easy to connect to almost any receiver or HF transceiver up to 200 watts. Redesigned with plug-in modular circuit board sockets, the NCC-2 includes one switched and powered internal slot and two passive internal slots per channel to accommodate these new options: * DXE-RPA-2-PM Receive Preamplifier Plug-In Modules (powered): one per channel for low-signal passive antennas with poor ground conditions * DXE-RG5000HD-PM Receiver Guard 5000HD Plug-In Module (passive): Front-end protection for the NCC-2 and the receiver * DXE-IT-PM 75 to 50 ohm Impedance Transformer Plug-In Module (passive): to match 75 ohm RX ANT feedlines to NCC-2 50 ohm internal impedance * NCC-2 Receive Filter Sets (passive, non-switchable): High Pass, Band Pass and Low Pass Filters for 160, 80, 40 meters typically in stock, with other band filters available individually by special order. DX Engineering NCC-2 Receive Antenna Phasing Systems offer these new additional benefits: * Multi-Color Status Indicating LEDs for Power, RTR Mode and Preamp Power CH A and CH B * New Radio Key Line Input with RX Enable Output-RTR Failsafe to prevent RF damage to NCC-2 and RX equipment * New ACC Key Line Output RCA female 'ground on transmit' pass-through for Amplifier or Accessory * New screw-on 2.1mm DC connector to prevent accidental power cable pull-out * Operates on +13.8VDC @ 2A input to power the NCC-2 and internally jumper set Bias Tee on each RX ANT ports for coax fed Active Verticals and other accessories. Offering new and experienced radio enthusiasts the next level of reception enhancements, DX Engineering model NCC-2 Receive Antenna Phasing Systems in use around the world!
( 19 )
$955.99
DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas
DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas are 43 ft. tall, high performance, 160 through 10 meter vertical antennas - designed from the ground up to offer ease of use, reliability and performance! New design and materials technology are used throughout. The patented* and massive SAF-T-TILT™ 3/8 in. thick rugged aluminum base allows easy, safe tilt action without the unsafe removal of mounting hardware -- as with some competitors' antennas! Now - using our ground-mounted vertical, you'll work DX as you never could with a low horizontal-dipole antenna! DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas require a special DX Engineering DXE-UN-43 UNUN with 150 ft. of RG-213 coax feed and your wide-range tuner - OR a automatic tuner at the base of the antenna without the UNUN.. These MBVE-5A verticals feature: * High strength Delrin® thermoplastic insulator that won't crack, splinter, peel or fail from exposure * Rugged structural grade type 6063-T832 drawn aluminum tubing radiator - the best alloy for high-strength, long-lasting antenna applications * New, massive, patented* SAF-T-TILT™ base allows safe raising and lowering of antenna without removal of fastening hardware * The fast taper antenna element provides the lowest wind resistance * Free-standing to 92 mph wind speeds * All Stainless Steel hardware - very durable and attractive MBVE-5A verticals include the antenna element, mounting plate with insulator, exclusive Patent Pending SAF-T-TILT™ Base, stainless steel hardware and clamps. Like any HF vertical, MBVE-5A verticals require a good ground radial system. 32 radials, 65 feet long are recommended. Fewer or shorter radials will work, but with some diminished results. For proper installation, additional materials are needed, but not supplied. You will need: * Mounting pipe--steel pipe that has 2.0 in. O.D. with 0.25 in. wall thickness, 4 ft. long -- standard 1-1/2 in. galvanized water pipe (with its 1.9 in. OD) is fine * Quick-Set or other concrete for mounting pipe installation * Radial wire and wire lugs--must use 14-gauge, stranded copper wire with PVC insulation. A minimum of 20 radials, each 32 feet long, should be used. * Penetrox A -- to ensure good connection between aluminum hardware and in-between aluminum tubing sections * Anti-seize compound, which should be used on the threads of all the stainless steel hardware to prevent galling Consider these new, cost-effective DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas and packages now available for your application: -- DXE-MBVE-5A 43 Ft. Antenna only -- DXE-MBVE-5A-4P Antenna Package with Radial Plate -- DXE-MBVE-5A-4UP Antenna Package with UN-43 UNUN -- DXE-MBVE-5A-4UPR Antenna Package with Radial Plate and UNUN Packages with Radial Plates include two extra hardware kits for a total of 60 possible radial wire connections. Packages that include the UNUN also include the UNUN mounting bracket. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. *US Patents D654,063 and D654,064 DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas are high-performance verticals and antenna packages that allow you to access all HF bands with only one antenna solution. Order one of these premium-quality all-band HF verticals from DX Engineering and roam HF… freely!
( 9 )
$846.95
—
$989.61
DX Engineering 6BTV 6-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems
DX Engineering 6BTV 6-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems are convenient and economical antenna installation packages that combine the time-tested Hustler antenna with our radial plate and our innovative tilt system! This can be your high performance HF ground mounted vertical antenna system. This DX Engineering Hustler 6BTV Package provides 80, 40, 30, 20, 15, and 10 meter band operation with: -- Dramatically improved transmit and receive signals -- Best possible signal pattern and performance boost with organized radial wire attachment system -- Simplified and long-lasting RF connections with proper connectors and cable -- Safe and easy tuning with our OMNI-TILT® mount - one person can walk the antenna up or down -- Professional grade stainless steel clamps and mounting hardware Included with each antenna package is our exclusive High Performance Hustler BTV Assembly and Installation Guide that will answer all your questions! You can read more right here, including the best way to install your vertical antenna system, the reasons for installing a radial system, and how to "Install Radial Wires Without Digging". Click "More Detail" below and then click the "Documentation" link. "More Details" includes the list of items included in this fantastic package. Make contacts beyond expectations! Operate with a versatile HF multi-band vertical antenna that performs to its full potential. Install a DX Engineering 6BTV 6-Band High Performance HF Vertical Antenna and OMNI-TILT® Mounting System.
( 4 )
$889.68
DX Engineering RR8B Remote Antenna Switch and Control Console Packages
DX Engineering RR8B Remote Antenna Switch and Control Console Packages bring a new level of convenience to your antenna setup. These packages combine DX Engineering's 5 or 10 kW key-down switch, plus a CC-8A or EC-8 Control Console. RR8B series Remote Antenna Switches feature: * 0-54 MHz operation with industry leading port-to-port isolation * 5 or 10 kW versions * Fully RF shielded with high strength, UV-resistant cover, stainless steel mounting bracket, and hardware * Lightning protection is standard * Solderless, removable plug for easy installation of control line with no disassembly * Can be wired without disassembly * Can select individual or multiple ports for stacking and phased array applications * Safe 12V DC relay operation * Unused antenna ports are open by design; may be internally jumpered to be grounded when not selected CC-8A Consoles feature: * 1-of-8 control format * 8 front panel LEDs to indicate switch position (with adjustable brightness) * Rear panel external plug * Operates on your 12V DC source, ideal for battery or emergency ops * Ergonomic selector knob * Powder-coated metal housing EC-8 controller features include: * 1-of-8 control format * Green power LED * Operates on your 12V DC source, ideal for battery backup or EMCOMM * Ergonomic selector knob * Powder-coated metal housing Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. When a complete remote antenna switching system is needed and high reliability is a must, DX Engineering RR8B Remote Antenna Switch and Control Console Packages are your best solution! * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 8 )
$789.98
—
$859.98
DX Engineering 4BTV 4-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems
DX Engineering 4BTV 4-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems are convenient and economical antenna installation packages that combine the time-tested Hustler antenna with our radial plate and our innovative tilt system! This can be your high performance HF ground mounted vertical antenna system. This DX Engineering Hustler 4BTV Package provides 40, 20, 15, and 10 meter band operation with: -- Dramatically improved transmit and receive signals -- Best possible signal pattern and performance boost with organized radial wire attachment system -- Simplified and long-lasting RF connections with proper connectors and cable -- Safe and easy tuning with our OMNI-TILT® mount - one person can walk the antenna up or down -- Professional grade stainless steel clamps and mounting hardware Included with each antenna package is our exclusive High Performance Hustler BTV Assembly and Installation Guide that will answer all your questions! You can read more right here, including the best way to install your vertical antenna system, the reasons for installing a radial system, and how to "Install Radial Wires Without Digging". Click "More Detail" below and then click the "Documentation" link. "More Details" includes the list of items included in this fantastic package. Make contacts beyond expectations! Operate with a versatile HF multi-band vertical antenna that performs to its full potential. Install a DX Engineering 4BTV 4-Band High Performance HF Vertical Antenna and OMNI-TILT® Mounting System.
( 3 )
$759.68
DX Engineering TFS4 Series B Transmit Four Square Systems
DX Engineering TFS4 Series B Transmit Four-Square Systems bring together the highest level of engineering excellence with the practical realities of operator convenience and ease of installation. These four-square hybrid systems are available in versions for the 160, 80, and 40 meter bands. They can be easily dropped into your quarter-wave spaced vertical 4-antenna array to provide optimum directional control. They allow the operator to receive or transmit with 5.5 dB gain in any one of four directions with a 20+ dB front-to-back ratio for interference reduction from unwanted directions. You can also switch to a single Omni-directional pattern with a push of a single button. This combination permits you to listen "all-around," unhindered by pattern nulls, and then select the best direction for signal reception and noise rejection. TFS4 Series B Transmit Four Square Systems are designed for use with four monoband vertical antennas placed at the corners of a square that is one-quarter wavelength on a side. The vertical element must be ungrounded and resonant in the desired band, and should be directly base-fed by the coaxial cable phasing lines from the centrally located controller (shunt-fed towers or radiating elements cannot be used). DX Engineering has several vertical antennas that are well suited for this application. Above all, a properly designed and installed radial system is necessary for top antenna performance, whether it's a single vertical or a full array. DX Engineering strongly recommends our optional Q75- series quarter wavelength cables constructed from our own high quality DXE-11U coax. It features a waterproof PE jacket, foam dielectric and has a velocity factor of 82 percent. These cables are electronically pruned to a precise electrical length derived from your choice of center operating frequency, terminated with hand-soldered silver-PTFE PL-259 connectors and weather-sealed with shrinkable tubing. Finally, each cable is tested for high voltage breakdown for maximum reliability and power handling. Since the transmit power is divided by the controller, the coaxial cable can handle QRO power with ease. If you already have a four-square array with a hybrid controller and would like to upgrade to improved performance and the Omni feature, the DX Engineering TFS4 Series B Transmit Four Square Systems are a direct transplant. BCD logic switching allows for the use of a 4-wire control cable to perform the necessary switching functions when powered by the included control console. Features: * Classic hybrid design is easy to install * Four directions plus Omni for versatile operation * 5 kW CW power rating for high reliability * Hot switching lock-out to disable amplifier while switching * Drop-in replacement for COMTEK systems * Proven DX Engineering RF relays for high performance * RF Shielded, high impact thermoplastic cover offers unique protection * Relays cycle during Power-On to ensure clean contacts Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Four-square systems work great! DX Engineering TFS4 Series B Transmit Four-Square Systems provide the heart of a modern phased array.
Not Yet Reviewed
$807.98
—
$831.98
DX Engineering 6BTV Six-Band High Performance HF Vertical Antenna and Original Tilt Base Systems
DX Engineering 6BTV Six-Band High Performance HF Vertical Antenna and Original Tilt Base Systems are convenient and economical antenna installation packages that combine the time-tested Hustler antenna with our radial plate and our innovative tilt system. DX Engineering Hustler 6BTV Packages provide 80, 40, 30, 20, 15, and 10 meter band operation with: --Dramatically improved transmit and receive signals --Best possible signal pattern and performance boost with organized radial wire attachment system --Simplified and long-lasting RF connections with proper connectors and cable --Safe and easy tuning using our patented original Tilt Base so one person can walk the antenna up or down --Professional grade stainless steel clamps and mounting hardware Included with these antenna packages is our exclusive High Performance Hustler BTV Assembly and Installation Guide that will answer all your questions! You can read more about the best way to install your vertical antenna system, the reasons for installing a radial system, and find out how to "Install Radial Wires Without Digging". Click the "Documentation" link to The Guide. Make contacts beyond expectations! Operate with a versatile HF multi-band vertical antenna that performs to its full potential.
Not Yet Reviewed
$842.69
DX Engineering 5BTV 5-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems
DX Engineering 5BTV 5-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems are convenient and economical antenna installation packages that combine the time-tested Hustler antenna with our radial plate and our innovative tilt system! This can be your high performance HF ground mounted vertical antenna system. This DX Engineering Hustler 5BTV Package provides 80, 40, 20, 15, and 10 meter band operation with: -- Dramatically improved transmit and receive signals -- Best possible signal pattern and performance boost with organized radial wire attachment system -- Simplified and long-lasting RF connections with proper connectors and cable -- Safe and easy tuning with our OMNI-TILT® mount - one person can walk the antenna up or down -- Professional grade stainless steel clamps and mounting hardware Included with each antenna package is our exclusive High Performance Hustler BTV Assembly and Installation Guide that will answer all your questions! You can read more right here, including the best way to install your vertical antenna system, the reasons for installing a radial system, and how to "Install Radial Wires Without Digging". Click "More Detail" below and then click the "Documentation" link. "More Details" includes the list of items included in this fantastic package. Make contacts beyond expectations! Operate with a versatile HF multi-band vertical antenna that performs to its full potential. Install a DX Engineering 5BTV 5-Band High Performance HF Vertical Antenna and OMNI-TILT® Mounting System.
( 1 )
$849.68
DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas
DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas, model DXE-7580FS-VA-1, are high performance 68 ft. antennas that are tunable to operate over segments of the entire 75/80 meter band with an SWR of 1.5:1 or less! These antennas are a breakthrough in full size, quarter wave verticals that offer full performance, but don't cost an arm and a leg. Plus, if your neighbors are the slightest bit touchy, these are the antennas for you. Their slim lines can hide in even a small stand of tall trees. Some have even painted these antennas the color that matches the bark of their surrounding trees! Designed with 6063 corrosion-resistant aluminum tubing and stainless steel hardware, these 80 meter vertical antennas are very durable and attractive. Because of their full size height and tubing size, rope guying is required on these antennas, typically at two levels. They include the DX Engineering standard stainless steel Tilt Base to allow you to walk the antenna up or down with only a few helpers on the rope guys. These inexpensive 80 meter verticals are ideal for phased arrays! DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas have a bandwidth that is outstanding—up to 528 kHz under 2:1, depending on your radial field. Your internal tuner can get the SWR down to 1:1 on any DX frequency for maximum power transfer and full performance! Of course, another key to performance is a good ground radial system; we recommend 32 radials, 65 ft. long. Fewer radials will work, but with diminished results. DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas feature: -- 5 kW SSB and CW rating—unparalleled reliability -- High power handling capacity--high strength, UV-protected EXTREN® insulators -- Ultra-wide SWR bandwidth and unbeaten gain -- Highest wind ratings—Up to 100 mph with proper rope guying --High strength 6063/6061 tubing manufactured to DX Engineering specifications -- Easy tilt up and down— exclusive antenna mount features DX Engineering's patented Tilt Base, *U.S. Patent Number 7,432,875 -- No rust --100 percent stainless steel tubing clamps and hardware -- Reliability second to none--specially manufactured stainless and aluminum saddle clamps, stainless bolts, and precision machining on each antenna Note: For additional information, please look at the files under the "Documentation" tab. Make plans to install your DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas and join in the fun of having the best possible signal on the 75 and 80 meter bands with a great antenna!
( 1 )
$899.98
DX Engineering PS-3B PRO-STACK Three Antenna Phasing Units
DX Engineering PS-3B PRO-STACK Three Antenna Phasing Units offer the ultimate performance for combining three identical Yagi or Log Periodic directional antennas and may be used for vertical antennas in a phased array that cover any band, from 160 through 10 meters. Pro-Stack frequency independent broadband phasing devices operate optimally with three properly spaced mono-band antennas, but can be used with three identical stacked multi-band beam antennas, for pattern and null steering that wins contests and snags the rarest DX! Signals arrive at your antenna system from different azimuth directions and different elevation angles. Adding a stacking phasing system to a rotational array adds the ability to steer the pattern of the antenna array in two planes, azimuth and elevation, and to move the major lobe and nulls. The greatest advantage of Pro-Stack arrays is the ability to move harmful pattern nulls away from signal arrival angles. While gain makes a marginal improvement, moving a 20 to 40 dB null can be a phenomenal change, so the Pro-Stack can make the difference between a barely readable and a strong signal, providing the performance edge needed to work rare DX - and win contests. DXE-PS-3B Pro-Stack Phasing Units are 50 ohm relay systems that handle up to 5 kW. A separate user-supplied automated controller or the optional DX Engineering DXE-EC-PS3 Control Console for these 12-position rotary switch selections: - Three antenna ports in phase, default with no power to control console. - Antenna port 1 only - Antenna port 2 only - Antenna port 3 only - Port 2 out of phase, Port 3 in phase - Port 1 out of phase, Port 3 in phase - Port 1 out of phase, Port 2 in phase - Ports 2 and 3 in phase - Ports 1 and 3 in phase - Ports 1 and 2 in phase - Ports 1 and 2 in phase, Port 3 out of phase - Ports 1 and 3 in phase, Port 2 out of phase - Port 1 out of phase, Ports 2 and 3 in phase These PRO-STACK units may also be used for other applications requiring these feedline selections. To ensure lowest SWR, impedance matching automatically changes when any antenna is disabled. By switching between antennas at different heights above ground and/or changing the phase relationship between multiple antennas. The old standard system in stacks was to activate or disable specific antennas in the stack to change pattern. However, with the Pro-Stack system, gain remains higher when all antennas are driven and phase is changed, plus this system allows phase inversion as well as the ability to switch any single antenna out of the array. DXE-PS-3B Broadband Phasing Units provide the greatest flexibility for three identical antennas. This relay unit contains a broad-bandwidth high-power 2:1 impedance matching transformer. This eliminates common requirements of using mixtures of 75 ohm and 50 ohm phasing or delay cables for impedance matching. Feedlines to each antenna from the relay unit must be the same cable of the same length and match the antenna impedance. DXE-PS-3B Pro-Stack Broadband Three Antenna Phasing Units feature: - Power Handling up to 5 kW - Broad band coverage on 160-10 meters - RF Shielded Weatherproof Housing - unique protection - DXE-PS-3B has High-RF tolerant, silver - PTFE UHF connectors - DXE-PS-3BDIN has Amphenol Connex 7/16 DIN Panel Connectors - DXE-PS-3BN-P are made with high-quality silver-PTFE Type N female connectors - Proven high current DX Engineering RF Relays - Safe 12 volt dc relay operation - MOV surge protection on control lines - RoHS compliant assembly Get a DX Engineering PS-3B PRO-STACK Three Antenna Phasing System for your winning antenna array.
Not Yet Reviewed
$895.99
—
$999.99
DX Engineering TW Antenna 5-Band Explorer Packages
DX Engineering is now the manufacturer of TW Antennas!* Our DX Engineering TW Antenna 5-Band Explorer Packages preserve and build upon the legacy of this premier portable HF antenna maker. Covering all bands from 20 through 10 meters, including WARC, DXE-TW-2010L-P Explorer Packages include everything you need to go portable! The package is comprised of the basic antenna structure, the switchable band box and an antenna stand with travel bag. You supply the coax and your own powered transceiver. It's a great antenna for portable HF QRP! Ideal for portable use, the lightweight Quadrastand, DXE-TW-AQ, lets you set up your DX Engineering HF Portable TW Antenna wherever you happen to be. Think about special operating events like Scouts Jamboree On-The-Air (JOTA), Field Day or even SOTA (Summits On-The-Air). For general camping and travel, a convenient and durable carrying case, DXE-TW-DXBAG, is included to make transporting these antennas in your car or RV a snap! Typical installation for TW Antennas is a compact 8.25 ft. tall and only 5 ft. wide. Make your choice; portable, fixed or both, then equip yourself with the best compact vertical-dipole antennas available. Note: Although a permanently-installed TW mount is available, DX Engineering TW Antenna band boxes are not waterproof. Do not leave your TW Antenna exposed to the elements without durable weather protection. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering TW Antenna 5-Band Explorer Packages are here to help you enjoy working stealthy HF at home or … anywhere! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
( 6 )
$888.95
DX Engineering 5BTV Five-Band High Performance HF Vertical Antenna and Original Tilt Base Systems
DX Engineering 5BTV Five-Band High Performance HF Vertical Antenna and Original Tilt Base Systems are convenient and economical antenna installation packages that combine the time-tested Hustler antenna with our radial plate and our innovative tilt system. DX Engineering Hustler 5BTV Packages provide 80, 40, 20, 15, and 10 meter band operation with: --Dramatically improved transmit and receive signals --Best possible signal pattern and performance boost with organized radial wire attachment system --Simplified and long-lasting RF connections with proper connectors and cable --Safe and easy tuning using our patented original Tilt Base - one person can walk the antenna up or down --Professional grade stainless steel clamps and mounting hardware Included with these antenna packages is our exclusive High Performance Hustler BTV Assembly and Installation Guide that will answer all your questions! You can read more about the best way to install your vertical antenna system, the reasons for installing a radial system, and find out how to "Install Radial Wires Without Digging". Click the "Documentation" link to The Guide. Make contacts beyond expectations! Operate with a versatile HF multi-band vertical antenna that performs to its full potential.
Not Yet Reviewed
$802.69
DX Engineering PRO-STACK Broadband Antenna Phasing Systems
DX Engineering PRO-STACK Broadband Antenna Phasing Systems are designed to combine two identical Yagi or log periodic beams, or three quarter-wave vertical antennas, into a phased array for enhanced directional pattern selections and dramatically improved HF operations. There is no need for special coaxial delay lines with the DX Engineering PRO-STACK systems. Just connect your antennas to the system relay unit with equal-length 50-ohm coaxial cable assemblies. The PRO-STACK switch relay units are available with high-quality PTFE-silver plated SO-239, UHF female connectors. The matching PRO-STACK Control Console operates the system with a 1-of-3 source voltage control format at 12-15V DC with a user supplied four conductor control cable to achieve four different antenna phasing selections. PRO-STACK Broadband Antenna Phasing Systems operate across the 160 to 10 meter range. They have two antenna ports that can be used for any application requiring the four basic selections: 1. BIP - Both antenna ports In-Phase 2. BOP - Both antenna ports Out-of-Phase 3. BOTTOM - Antenna port 1 only 4. TOP - Antenna port 2 only. The unpowered default is 1 - Both ports In-Phase. Impedance matching is automatic in the PRO-STACK even when any antenna port is disconnected. Generally, stacked Yagi antennas are separated vertically with greater than one half wavelength free space. Since the DX Engineering PRO-STACK Antenna Phasing Systems are broadband, they may be easily adapted to larger arrays. For example, four stacked Yagis may be combined by creating two sets of PRO-STACKS, with a third DX Engineering PRO-STACK to combine the first two. PRO-STACK systems may also be used to feed quarter-wave resonant vertical antennas for a high-gain, 4-pattern array. This arrangement requires three verticals, with the center #2 passive antenna element directly grounded to the system ground radial system at all times, while elements #1 and #3 are then fed in various phase relationships by the PRO-STACK. Details are in the complete PRO-STACK PS-2B Instruction Manual linked here in "Documentation" tab. The full- color printed manual is included with the system relay unit. PRO-STACK Broadband Antenna Phasing Systems are available as separate Relay Units for operators who have automated BCD switching devices, and as packaged systems with Relay Unit and matching manual Control Console. Features of the DX Engineering PRO-STACK Broadband Antenna Phasing Systems include: * Power handling up to 5 kW * Broadband coverage on 160-10 meters * High impact shielded weatherproof housing * High-RF tolerant, silver-PTFE SO-239 (UHF female) connectors * Proven DX Engineering RF relays for high performance * Safe 12V relay operation * DC-powered control console allows battery or solar emergency operation * MOV surge protection on control lines * External, removable control line connector * RoHS-compliant assembly Dominate the airwaves with DX Engineering PRO-STACK Broadband Antenna Phasing Systems. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
Not Yet Reviewed
$895.98
—
$935.99
DX Engineering Receive Eight Circle Array Controller and Switch Package
DX Engineering Receive Eight Circle Controller and Switch Package, DXE-RCA8C-SYS-2P, is for the array builder who wants to use their own passive receive verticals for a mono-band receive array. The DX Engineering Eight Circle Array will dramatically improve reception of weak distant signals with unparalleled rejection of extraneous signals and noise. This eight-direction switchable array uses a special end-fire/broadside combination of eight short receiving vertical elements. The resulting narrow directional receiving pattern is superior to standard or short Beverage antennas, Reversible Beverage systems and typical two, three or four element arrays. Receive arrays of short vertical elements limit signal and noise for dramatically superior weak signal reception as compared to full size transmitting antennas and arrays. With proper spacing of eight vertical elements, the Receive Eight Circle Array is the ultimate high performance, directional receive antenna for HF Amateur, SWL or AM DXing. DX Engineering Receive Eight Circle Arrays offer directional performance comparable to eight very long phased Beverages, using far less land area. These packages are designed to be used with eight identical, user-supplied, active or passive symmetrically-spaced vertical elements to provide switching for an 8-direction receiving antenna system. Passive elements will generally provide you with a monoband receiving system. With a DX Engineering Active Vertical package you can achieve excellent directional receiving performance over three bands. Click "More Details" below for additional information, features and specifications. The "Documentation" link contains manuals and associated files for complete product installation information. Build an exceptionally effective, electronically rotatable, stationary receive antenna that lets you hear the DX that cannot be heard on a transmit antenna. Dig the weak signals out of the noise with an antenna that can help make your station one of the best. Order the DX Engineering Receive Eight Circle Controller and Switch Package.
Not Yet Reviewed
$815.98
DX Engineering Receive Short Element Active Vertical Antennas
DX Engineering Receive Short Element Active Vertical Antennas (the RSEAV Antennas) offer excellent low noise radio frequency reception from 40 kHz to 30 MHz. Better receiving performance than full-size transmit antennas and other active makes the DXE-RSEAV-1 the best choice on the market for VLF through HF reception, including long-distance AM broadcast, Medium Wave and Shortwave (SWL), and new low-frequency Amateur bands, DXing, contesting, and everyday HF operations. Click on a listed product title and Scroll Down to see additional important information. A complete product description appears below the Specifications Overview. Instruction manual links appear in the Documentation section. The sleek and stealthy DXE-RSEAV-1 includes a high-quality three-section 8.5 ft. (2.6m) aluminum tubing whip, insulated mounting plate and the completely new DXE-AVA-3 Active Matching Unit. Its state-of-the-art broadband operational amplifier design works as a high-impedance buffer between the short antenna element and RG6U 75-ohm coax. When installed in the appropriate location, RSEAV antennas provide significantly better weak signal reception than other active receive antennas and full-size transmit-capable antennas, with substantially reduced noise and lower spurious signal interference. Receive Short Element Active Vertical Antennas are intended to be mounted on a ground rod at ground level in a clear area away from all metal, towers and other antennas. They are sold individually (DXE-RSEAV-1), or with a bias tee (DXE-RSEAV-1FVI) and DXE-RSEAV-1 Receive Short Element Active Verticals set a new standard for "Active Receive Vertical Antennas" replacing legacy DXE-ARAV-3, ARAV-2, ARAV-1 and AL-24 versions. Use multiple DXE-RSEAV-1 for all 4 and 8 element DX Engineering Receive Arrays – all 3, 4 and 8 element Hi-Z Antennas Arrays – and 2 element receive arrays with DXE-NCC-2 and NCC-1 Variable Phasing Controllers. The DXE-RSEAV-1 is designed to be a very low-gain, low-noise antenna for greatly improved signal-to-noise performance over a very wide range of frequencies. In a proper single or multi-element array installation, this Receive Vertical antenna will attenuate high-angle skywave signals, which is the goal for a low band DXing receive antenna. Low-angle, long-range DX signals are easier to copy with a good radio and DX Engineering Receive Short Element Active Vertical Antennas. Please Note: To achieve the expected reception pattern, multi-element phased arrays depend upon identical gain and phase response from each element. Every individual element amplifier, its grounding, and even its feedline characteristics and length, must be identical to the others in the array. Therefore, when unrepairable failures occur, it is essential to replace or upgrade all the elements in the array with identical, fully compatible DXE-RSEAV-1 antennas or DXE-AVA-3 units.
( 3 )
$999.96
DX Engineering TW Antenna 5-Band Globetrotter Packages
DX Engineering is now the manufacturer of TW Antennas! Our DX Engineering TW Antenna 5-Band Globetrotter Packages preserve and build upon the legacy of this premier HF-stealth and portable antenna maker. Covering all bands from 20 through 10 meters, including WARC, DX Engineering Globetrotter antennas may be remotely band-switched (from the shack) to cover any of the five high bands. DXE-TW-2010-P-P Globetrotter packages include everything you need! The package is comprised of the basic antenna structure, the switchable band box, a 65.5 ft. control cable, controller console and permanent antenna mount. The included DXE-TW-PMP permanent mount lets you set up your DX Engineering HF Portable TW Antenna wherever it's convenient. Being naturally stealthy, these compact HF vertical-dipole antennas feature a black powdercoat finish that is excellent for concealment. They make great fixed antennas in HOAs or where "CC and R" antenna restrictions preclude the installation of towers or easily visible HF antennas. It couldn't be much easier: Simply unfold the Globetrotter Top and Bottom Sections, add your Band Box Center Post section, and place the antenna on the stationary ground mount (DXE-TW-PMP) run your choice of coax and operate! No radials are required for these vertical dipoles! Typical installation for TW Antennas is a compact 8.25 ft. tall and only 5 ft. wide. Equip yourself with the best multi-band compact, stealth vertical-dipole antennas available. Note: Although a permanently-installed mount is available, DX Engineering TW Antenna band boxes are not waterproof. Do not leave your TW Antenna exposed to the elements without adequate and durable weather protection for the band box. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering TW Antenna 5-Band Globetrotter Packages are here to help you enjoy working stealthy HF at the home QTH! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
( 2 )
$956.96
DX Engineering DXE-VE-60-2P 60-Meter Monoband Vertical Antennas
DX Engineering DXE-VE-60-2P 60-Meter Monoband Vertical Antennas are high performance, mono-band vertical antenna systems that are easy to assemble, install and adjust. An overall height of about 43 ft. allows these antennas provide full-band 60M coverage with one full quarter wavelength. Since the impedance at resonance of a properly installed quarter wave vertical is less than 50 ohms, the SWR may be optimized with the optional DXE-VMN-1 Matching Network Kit, rather than changing the length in an attempt to find better SWR. Parts included with DXE-VE-60-2P antenna kits are: * DXE-MBVE-5ABASE * DXE-MBVE-5ATOP * DXE-MBVE-5A60MCK (60 meter kit) * Maxi-Core® 20 1:1 Current Choke Balun * DXE-UN-BRKT-5A Balun mounting bracket These ground-mounted antennas will require user-supplied radials, radial plate, radial hardware and ground staples. Radials increase antenna current, sharpen the antenna Q and boost efficiency. Additionally, two DXE-SSVC-2P Saddle clamps are required for antenna mounting. In case you don't want to collect these parts piece meal, all of them are included in the larger DXE-VE-60-2P-RAD 60 Meter Monoband Vertical Antenna kits. The SAF-T-TILT Tilt™ Base, supplied with the DXE-VE-60-2P, allows you to walk the antenna up and down to make tuning changes easily. Designed with 6063 corrosion-resistant aluminum tubing and stainless steel hardware, these antennas are very durable and attractive. With excellent surface appearance, 6063 aluminum alloy is the best alloy for high strength, long-lasting antenna applications. 60 meters is used throughout much of the world as an emergency and search and rescue band. Carrier frequencies from 5.102 through 5.425 MHz are used, with Upper Sideband as the emission mode. Due to limited access and rugged terrain, heavier activity exists in Australia and the State of Alaska. Alaska's emergency channel is 5167.5 USB. Australia has a 60 meter health and welfare net to monitor its citizens traversing the treacherous Outback regions. Amateur Radio operations have also been authorized on 60 meters in many parts of the world. In the USA, five channels are available including 5330.5 kHz, 5346.5 kHz, 5357.0 kHz, 5371.5 kHz, and 5403.5 kHz. These are the frequencies that appear in your transceiver's tuning display when your transceiver is properly set in the USB mode. Note: For additional product information, please look at the files under the "Documentation" tab. CW and digital modes may also be used on 60 meters. That makes 60 meters a worldwide and versatile DX band! Get in on the 60 meter action with a robust quarter wave vertical antenna. Install DX Engineering 60 Meter Monoband Vertical Antennas and see who you can work on 5 MHz!
Not Yet Reviewed
$828.45
DX Engineering DVA Dual Vertical Array Systems
DX Engineering DVA Dual Vertical Array Systems are advanced phasing systems that have set a new standard for array performance with two ground-mounted verticals. Dual Vertical Array Systems include a compact DVA Phasing Relay Unit made specifically for an individual HF band and an EC-DVA Directional Control Console. DX Engineering Dual Vertical Arrays produce two opposite enhanced End-Fire Cardioid patterns and one Broadside-Omni pattern. Heavy-duty components handle over 2 kW continuous RF power for enhanced performance at low SWR over a wide bandwidth. The Dual Vertical Array end-fire directional patterns achieve a real front-to-back over 20 dB with typical array forward gain up to 3 dB over a single vertical. The greatest advantage of a Dual Vertical Array is that a tower and rotator are not required, as with a Yagi antenna. Especially for 160, 80, and 40, and even on the other HF bands, a Dual Vertical Array is mechanically simpler and safer. Here is a financially practical directional antenna that is much easier to install! These are great directional antenna systems for temporary and Field Day operation, as well as for permanent builds, because they ARE so much easier to install than a beam! If you are dissatisfied with your present system, are ready for an upgrade, or just need to get out of the tower game, the DX Engineering DVA is your answer! Refurbish an existing antenna system, equip your temporary array, or build a new phased array with a DVA. It's all on the ground, safe and simple: DX Engineering Dual Vertical Arrays offer a better way to enjoy a high-performance mono-band directional antenna. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 4 )
$775.98
DX Engineering TW Antenna 80 Meter Solo Explorer Packages
Preserving and building upon the legacy of this premier portable HF antenna line, DX Engineering is now the manufacturer of TW Antennas!* DX Engineering's acquisition of the products and designs of these unique HF portable and stealthy antennas brings easy access and simplified ordering to this antenna line formerly known as Transworld. DX Engineering TW Antenna 80 Meter Solo Explorer Packages include everything you need to go portable! The package is comprised of the basic antenna structure, an expanded band box to contain the large 80 meter matching coils and an antenna stand. You supply the coax and your own powered transceiver. It's a great antenna for portable Low-Band QRP! Naturally stealthy, these compact HF vertical-dipole TW antennas feature a black powder-coat finish that is excellent for antenna use in HOAs. Use them where "CC & R" antenna restrictions preclude the installation of towers or easily-visible HF antennas. Simply unfold the DXE-TW-BAS-BLK Top and Bottom Sections, add your Band Box Center Post section, and place the antenna on the antenna stand and operate! No radials are needed with these 80-meter vertical dipoles! Ideal for portable use, the lightweight Quadrastand, DXE-TW-AQ, lets you set up your DX Engineering HF Portable TW Antenna wherever you happen to be. Think about special operating events like Scouts Jamboree On-The-Air (JOTA), Field Day or even SOTA (Summits On-The-Air). For general camping and travel, a convenient and durable carrying case, DXE-TW-DXBAG, is OPTIONALLY available to make transporting these antennas in your car or RV a snap! Typical installation for TW Antennas is a compact 8.25 ft. tall and only 5 ft. wide. Make your choice; portable, fixed or both, then equip yourself with the best compact vertical-dipole antenna available. Note: Although a permanently-installed mount is available, DX Engineering TW Antenna band boxes are not waterproof. Do not leave your TW Antenna exposed to the elements. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering TW Antenna 80 Meter Solo Explorer Packages are here to help you enjoy working stealthy HF at home or… anywhere! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
Not Yet Reviewed
$898.96