Availability
DX Engineering HAM Radio Equipment
DX Engineering offers the top brands in the ham radio industry—none better than our very own DX Engineering products. From our station accessories and antennas...
DX Engineering offers the top brands in the ham radio industry—none better than our very own DX Engineering products. From our station accessories and antennas right down to the cable assemblies, clamps, and hardware that bring it all together, DX Engineering products are made with superior materials, expert engineering—and no compromises! Build a better ham radio station with our heavy-duty rotator, steel masts, thrust bearings, remote antenna switches, fiberglass and aluminum tubing, element and saddle clamps, antenna building parts, our full line of coaxial cables, cable assemblies, connectors, high-quality...
DX Engineering offers the top brands in the ham radio industry—none better than our very own DX Engineering products. From our station accessories and antennas right down to the cable assemblies, clamps, and hardware that bring it all together, DX Engineering products are made with superior materials, expert engineering—and no compromises! Build a better ham radio station with our heavy-duty rotator, steel masts, thrust bearings, remote antenna switches, fiberglass and aluminum tubing, element and saddle clamps, antenna building parts, our full line of coaxial cables, cable assemblies, connectors, high-quality tools and a wide selection of accessories. Maximize performance with DX Engineering verticals and dipoles, add-on kits, baluns, RF chokes and ununs, transmitting array systems, receiving antennas and arrays, our receive phasing unit and more. Keep your station in peak condition with weatherproofing kits, grounding clamps, plates, surge protectors and copper straps. All DX Engineering products are engineered to be the best. See for yourself—shop now!
DX Engineering Tinned Copper Braid Assemblies
DX Engineering Tinned Copper Braid Assemblies are typically used for the proper grounding of individual pieces of electrical or electronic equipment to a common grounding bus, such as a copper strap or a thicker bus bar. DX Engineering tinned copper braid assemblies are used for industrial, commercial, and broadcasting applications inside of electrical racks, for the connection of sub-assemblies to a metal chassis or grounding point, and for any special application where a high-quality tinned copper braid assembly is required. Our assemblies are made with top-quality tinned copper braid of various widths and lengths, and most are terminated with machine-crimped and hand-soldered terminals. Some assemblies feature heat shrink tubing over the connections for strain relief and longevity. Be confident with your equipment and system grounding with the best--DX Engineering Tinned Copper Braid Assemblies.
( 95 )
$14.25
—
$31.99
DX Engineering Tinned Copper Braid
DX Engineering tinned copper braid is available in five widths and is perfect for grounding applications. It's sold by the foot to accommodate almost any project. Contact your DX Engineering sales representative to discuss your needs if long, continuous lengths are required.
( 40 )
$0.85
—
$2.25
DX Engineering UNUN to Vertical Antenna Feedpoint Connection Kits
DX Engineering UNUN to Vertical Antenna Feedpoint Connection Kits consist of two tinned copper braid straps for a connection between a DX Engineering 4:1 high power UNUN and the ground radial systems and feedpoint of a vertical antenna. These straps are the correct length to allow for short, low inductance connections, and flexible to allow for the use of a tilt base with the antenna. Included with the UN-43-R, both straps measure 10 in. long, 9 in. from center to center of the preformed 1/4 in. holes, 1 in. wide, and 0.045 in. thick. The width and thickness may vary slightly as the flexible braid is stretched or compressed. DX Engineering UNUN to Vertical Antenna Feedpoint Connection Kits are the perfect choice when adding an UNUN to your antenna system.
( 2 )
$11.99
DX Engineering Exhaust Grounding Kits
Eliminate stubborn noise in your mobile installation with DX Engineering Exhaust Grounding Kits. Many modern vehicles have individual injectors and spark plug coils for each cylinder. These units can create substantial pulses on the vehicle wiring against the ground system. Engine blocks often have a poor ground, so anything attached to them can become a radiator. The exhaust pipe is directly bolted to the engine and can be excited just like an antenna, radiating the pulsing noise. By using one of our exhaust grounding kits, you can eliminate noise from your mobile installation. All hardware in these kits is made from high quality stainless steel. Each kit includes: * Exhaust saddle clamp * 14 in. long x 0.75 in. wide x 0.125 in. thick tinned copper braid * 3/8 x 1 in. bolt * 3/8 nut * Three 3/8 external tooth washers * 3/8 flat washer * 3/8 split washer
( 5 )
$31.99
—
$34.99
DX Engineering Station Accessory Packages
DX Engineering Station Accessory Packages take the guesswork out of ham radio shopping and help you get going and get on the air! We've assembled specialized accessory packages to make it easy for the beginner, as well as the more experienced hams trying a new system or a new facet of our great hobby. You've got a good-performing station and DX Engineering has the equipment and accessories necessary to make it even better! CLICK or TAP on the title of a listed item for an overview - a complete description, Kit Contents, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation.
Not Yet Reviewed
$515.42
DX Engineering 400MAX Low-Loss 50-ohm Bulk Coaxial Cable
DX Engineering 400MAX is premium, low-loss, 50-ohm bulk cable with a special Type III-A, UV-resistant polyethylene jacket that is waterproof; ideal for outdoor applications, particularly direct-bury. With its larger 10 AWG stranded copper center conductor, 400MAX is specially suited for high-power amateur stations, providing a lower loss solution for long cable runs at any legal power level. The high-quality construction continues with a gas-injected foam polyethylene dielectric, followed by the highest level of shielding with bonded aluminum tape covered by a tinned copper shield braid. Coaxial cables with foil-braid dual shielding or foam dielectric are optimized for stationary simplex antenna applications across HF, VHF and UHF. DXE-400MAX is not recommended for use in in a VHF/UHF duplex repeater applications or for a beam antenna rotator loop. DX Engineering 400MAX Low-Loss 50-ohm Bulk Coaxial Cable accepts standard PL-259 or N connectors. Note: For additional product information, please look at the files under the "Documentation" tab.
( 92 )
$1.54
—
$1,539.99
DX Engineering 400MAX PL-259 Low-Loss 50-ohm Coax Assemblies
Our patented* revolutionary new PL-259 connector and our premium, low-loss 400MAX coaxial cable are designed to make the new DX Engineering 400MAX PL-259 Low-Loss 50-ohm Coaxial Cable Assemblies the best cable assemblies available for simplex HF, VHF and UHF applications. DX Engineering 400MAX coax features a waterproof jacket made with a highly UV-resistant, Type III-A polyethylene which is ideal for all outdoor feedline applications including direct-bury installations. With a large 10 AWG stranded copper center conductor, 400MAX DX Series low-loss assemblies are perfectly suited for long cable runs and low or high power level operations. Our 400MAX coax cable also features modern, gas-injected foam polyethylene dielectric that cannot absorb moisture and has complete shielding with 100 percent coverage bonded aluminum tape covered by minimum 95 percent coverage tinned copper braid. Regarded in the industry as a top quality low-loss feedline, DX Engineering 400MAX Coaxial Cable is custom made to provide the highest performance and excellent longevity. Coaxial cables with foil-braid dual shielding or foam dielectric are optimized for stationary simplex antenna applications across HF, VHF and UHF. DXE-400MAX is not recommended for use in in a VHF/UHF duplex repeater applications or for a beam antenna rotator loop. DX Engineering 400MAX PL-259 DX Series Coaxial Cable Assemblies are terminated at each end with our new, custom-designed, silver-plated brass DX Engineering PL-259 (UHF male) connectors. These next generation PL-259 connectors feature: -Full diameter, full length soldered center pins that snugly fit even worn SO-239s -Spacious center pin inside diameter that accepts large conductors and allows generous solder flow -Deep, double knurled threaded shells for secure finger tightening These new, ultra-high quality PL-259s have all silver-plated brass shells and bodies with center pins securely mounted in PTFE dielectric for exceptional RF characteristics and power handling. Our new 400MAX DX Series cable assembly PL-259 center pins are hand soldered by trained assembly techs to assure a proper connection. These special PL-259 cable assemblies also feature machine crimped shields, with 360 degrees of complete mechanical and electrical contact for maximum reliability. Every assembly is continuity and Hi-Pot tested and then heat-shrink weather-sealed for the ultimate service longevity. You won't find this level of cable assembly quality anywhere else! DX Engineering 400MAX PL-259 Low-Loss 50-ohm Coaxial Cable Assemblies with our new PL-259 connectors are now available, only from DX Engineering! *U.S. Patent D745849
( 324 )
$40.99
—
$334.99
DX Engineering 400MAX Type N Low-Loss 50-ohm Coax Assemblies
DX Engineering 400MAX Type N Low-Loss 50-ohm Coaxial Cable Assemblies offer the lowest possible loss at VHF and UHF frequencies. Used by communications professionals through 2,400 MHz and above, N-Type connectors have low insertion loss and maintain 50 Ohm impedance, for installations where every tenth of a dB counts! DX Engineering 400MAX coax features a tough, waterproof jacket made with a highly UV-resistant, Type III-A polyethylene which is ideal for simplex outdoor feedline applications including direct-bury installations. With a large 10 AWG stranded copper center conductor, 400MAX low-loss assemblies are perfectly suited for long cable runs and low or high power level operations. Our 400MAX coax cable also features modern, gas-injected foam polyethylene dielectric that cannot absorb moisture and has complete shielding with 100 percent coverage bonded aluminum tape covered by minimum 95 percent coverage tinned copper braid. Regarded in the industry as a top quality low-loss feedline, DX Engineering 400MAX Coaxial Cable is custom made to provide the highest performance and excellent longevity. B) Coaxial cables with foil-braid dual shielding or foam dielectric are optimized for stationary simplex antenna applications across HF, VHF and UHF. DXE-400MAX is not recommended for use in in a VHF/UHF duplex repeater applications or for a beam antenna rotator loop. Our 400MAX DN Series cable assembly N-Type connectors feature machine crimped shields and centers, with 360 degrees of complete mechanical and electrical contact for maximum reliability. Every assembly is continuity and Hi-Pot tested and then heat-shrink weather-sealed for the ultimate in-service longevity. You won't find this level of cable assembly quality anywhere else! DX Engineering 400MAX Type N Low-Loss 50-ohm Coaxial Cable Assemblies are now available, only from DX Engineering!
( 33 )
$41.99
—
$182.99
DX Engineering 400MAX Type-N to PL-259 Low-Loss 50-ohm Coaxial Adapter Cable Assemblies
What if two RF devices – the radio, switch, meter, lightning protector, choke, balun or the antenna – have opposite female connectors, one type-N and the other SO-239? This dilemma is solved with the uniquely helpful DX Engineering 400MAX Type-N to PL-259 Low-Loss 50-ohm Coaxial Adapter Cable Assemblies, the perfect alternative to questionable straight adapters. Made for any job (HF, VHF and UHF) and especially for outdoors, one top-quality silver plated Type-N male connector and one patented* Next Generation PL-259 (UHF male) connector terminates our premium, low-loss 400MAX coaxial cable to create these very useful Adapter Cable Assemblies. DX Engineering 400MAX coax features a waterproof jacket made with a highly UV-resistant, Type III-A polyethylene which is ideal for all outdoor feedline applications, including direct-bury installations. With a large 10 AWG stranded copper center conductor, 400MAX NX Series low-loss assemblies are perfectly suited for short or long cable runs and low or high-power level operations. Our 400MAX coaxial cable also features modern, gas-injected foam polyethylene dielectric that cannot absorb moisture and has complete shielding with 100 percent coverage bonded aluminum tape covered by minimum 95-percent coverage tinned copper braid. Regarded in the industry as a top quality low-loss feedline, DX Engineering 400MAX Coaxial Cable is custom made to provide the highest performance and excellent longevity. Coaxial cables with foil-braid dual shielding or foam dielectric are optimized for stationary simplex antenna applications across HF, VHF and UHF. Note: DXE-400MAX is not recommended for use in repeater applications, VHF/UHF duplex, or for a beam antenna rotator loop. DX Engineering 400MAX PL-259 NX Series Coaxial Adapter Cable Assemblies are terminated at one end with the N-Type male connector and the other end with our custom-designed DX Engineering PL-259 (UHF male) connector. Both silver plated connectors feature machine-crimped shields with 360 degrees of complete mechanical and electrical contact for maximum reliability. PL-259 center pins are hand-soldered, and Type-N center pins are machine-crimped by trained assembly techs to assure a proper connection. Next Generation PL-259 connectors feature: * Full diameter, full-length soldered center pins that snugly fit even worn SO-239s * Spacious center pin inside diameter that accepts large conductors and allows generous solder flow * Deep, double-knurled threaded shells for secure finger tightening These high-quality PL-259s have all silver-plated brass shells and bodies with center pins securely mounted in PTFE dielectric for exceptional RF characteristics and power handling. Every assembly is continuity and Hi-Pot tested and then heat-shrink weather-sealed for the ultimate service longevity. You won't find this level of cable assembly quality anywhere else! 400MAX Type-N to PL-259 Low-Loss 50-ohm Coaxial Adapter Cable Assemblies are available in selected lengths and at any length in the Custom Cable Builder, only from DX Engineering! *U.S. Patent D745849
( 8 )
$55.99
—
$573.70
DX Engineering RG-58A/U 52-ohm Low-Loss Coaxial Cable Assemblies
DX Engineering RG-58A/U 52-ohm Low-Loss Coaxial Cable Assemblies are very flexible, solid dielectric, braided shield cable intended for RF connections to SO-239 and BNC equipment and antennas. These assemblies are suitable for moderate-power applications where flexibility is a key consideration. NOTE: These premade cables come with either high quality, silver plated 83-1SP PL-259 or silver plated BNC Male connectors installed at each end of the DXE-58AU cable, for use on any equipment with SO-239 or BNC Female connectors. Slightly smaller than RG-8X cable, DX Engineering RG-58A/U Coaxial Cable Assemblies are made from our new-process DXE-58AU solid dielectric cable. Featuring a stranded tinned copper center conductor, a braided tinned copper shield and a standard Type I PVC jacket, our 58AU cable assemblies are intended for low to moderate power, test and mobile applications where short runs and flexibility are required. DX Engineering RG-58AU offers easy handling characteristics and good shielding. Plus, this solid dielectric cannot gather moisture and has longer viability than old RG-58 foam cables. INFO: Type-I PVC is not intended for permanent installation in outdoor locations where sun exposure is expected. This cable can last well over 10 years if it is protected from UV sunlight. Our RG-58AU Coaxial Cable Assemblies come complete with high-quality silver-plated Delrin-dielectric PL-259 or BNC male connectors. Their machine-crimped shields feature 360 degrees of complete mechanical and electrical contact for maximum reliability. Their center conductors are hand soldered and inspected. All DX Engineering Cable Assemblies are Hi-Pot tested and heat-shrink weather-sealed for the ultimate in service longevity. When you are looking for lightweight and flexible pre-assembled cable assemblies and want a high-quality, reliable product, look no further than our own DX Engineering RG-58A/U 52-ohm Low-Loss Coaxial Cable Assemblies.
( 1 )
$34.99
—
$55.99
DX Engineering Times Microwave LMR® UHF Male Coaxial Cable Assemblies
DX Engineering Times Microwave LMR® UHF Male Coaxial Cable Assemblies are available in several useful lengths, terminated with DX Engineering Next Generation PL-259 connectors; ultra-high quality all silver-plated shells and bodies with center pins securely mounted in PTFE dielectric for exceptional RF characteristics and power handling. DX Engineering Next Generation PL-259 connectors feature: * Full diameter, full length soldered center pins that fully engage even worn SO-239s * Spacious center pin inside diameter that accepts large conductors and allows generous solder flow * Deep, double knurled threaded shells for secure finger tightening * All DX Engineering Cable Assemblies are Hi-Pot tested and adhesive heat-shrink weather-sealed for the ultimate in service longevity Times Microwave Coaxial Cables are recognized as superior RF cable products. Times Microwave Systems LMR® UltraFlex (UF) cables have a stranded bare copper center conductor, a gas foam polyethylene dielectric, and a rubber-like black thermoplastic elastomer jacket designed for repeated bending. LMR®'s RF shielding is typically 50 dB greater than off-brand single braided shield coax. LMR® UltraFlex copper braid and multi-ply bonded foil outer conductor shields provide greater than 90dB shielding. That is better than 180 dB isolation between two adjacent LMR® cables. DX Engineering Times Microwave LMR® UHF Male Coaxial Cable Assemblies are an excellent choice for a variety of indoor, mobile, portable, and outdoor applications.
( 1 )
$42.99
—
$196.99
DX Engineering LMR400UF Ultra-Flex Coaxial Cable Assemblies
DX Engineering LMR400UF UltraFlex Coaxial Cable Assemblies handle twice the power at half the loss with the same bending capabilities of smaller diameter coaxial cables. UltraFlex Cable Assemblies are perfect for interconnecting high and low power HF and VHF equipment. Times Microwave LMR® 400UF UltraFlex cable has a stranded bare copper center, foam polyethylene dielectric and a pliable rubber jacket (black thermoplastic elastomer) designed for bending. DX Engineering LMR400UF UltraFlex DX Series PL-259 Coaxial Cable Assemblies are terminated at each end with our custom-designed, silver-plated brass DX Engineering PL-259 (UHF male) connectors. These next generation PL-259 connectors feature: -Full diameter, full length soldered center pins that snugly fit even worn SO-239s -Spacious center pin inside diameter that accepts large conductors and allows generous solder flow -Deep, double knurled threaded shells for secure finger tightening These high quality PL-259s have all silver-plated brass shells and bodies with center pins securely mounted in PTFE dielectric for exceptional RF characteristics and power handling. Our DX Series cable assembly PL-259 center pins are hand soldered by trained assembly techs to assure a proper connection. These special PL-259 cable assemblies also feature machine crimped shields, with 360 degrees of complete mechanical and electrical contact for maximum reliability. Every assembly is continuity checked and evaluated with extremely high voltage, then heat-shrink weather-sealed for ultimate longevity. You will not find this level of cable assembly quality anywhere else! Terminated with DX Engineering Next Generation PL-259 connectors, these cable assemblies are intended for use to 170 MHz. An exceptionally flexible, low-loss coaxial jumper for high power Amateur or commercial HF or VHF use – order DX Engineering LMR400UF UltraFlex Coaxial Cable Assemblies.
( 30 )
$54.19
—
$289.99
DX Engineering RG-58A/U 52-ohm Bulk Coaxial Cable
DX Engineering RG-58A/U 52-ohm Bulk Coaxial Cable is a highly flexible, 52 ohm feedline with a black PVC jacket, which is ideal for all indoor and some outdoor applications where UV exposure is not an issue. Specially suited for low to medium-power amateur stations, RG-58A/U also provides an ultra-flexible cable for coaxial jumpers. DX Engineering RG-58A/U features a low-density polyethylene dielectric and uses PL-259 or 2-piece N connectors. Both connector types must be used with reducing adapters that fit RG-58 cable.
( 17 )
$0.55