Availability
DX Engineering HAM Radio Equipment
DX Engineering offers the top brands in the ham radio industry—none better than our very own DX Engineering products. From our station accessories and antennas...
DX Engineering offers the top brands in the ham radio industry—none better than our very own DX Engineering products. From our station accessories and antennas right down to the cable assemblies, clamps, and hardware that bring it all together, DX Engineering products are made with superior materials, expert engineering—and no compromises! Build a better ham radio station with our heavy-duty rotator, steel masts, thrust bearings, remote antenna switches, fiberglass and aluminum tubing, element and saddle clamps, antenna building parts, our full line of coaxial cables, cable assemblies, connectors, high-quality...
DX Engineering offers the top brands in the ham radio industry—none better than our very own DX Engineering products. From our station accessories and antennas right down to the cable assemblies, clamps, and hardware that bring it all together, DX Engineering products are made with superior materials, expert engineering—and no compromises! Build a better ham radio station with our heavy-duty rotator, steel masts, thrust bearings, remote antenna switches, fiberglass and aluminum tubing, element and saddle clamps, antenna building parts, our full line of coaxial cables, cable assemblies, connectors, high-quality tools and a wide selection of accessories. Maximize performance with DX Engineering verticals and dipoles, add-on kits, baluns, RF chokes and ununs, transmitting array systems, receiving antennas and arrays, our receive phasing unit and more. Keep your station in peak condition with weatherproofing kits, grounding clamps, plates, surge protectors and copper straps. All DX Engineering products are engineered to be the best. See for yourself—shop now!
DX Engineering 400MAX Type-N to PL-259 Low-Loss 50-ohm Coaxial Adapter Cable Assemblies
What if two RF devices – the radio, switch, meter, lightning protector, choke, balun or the antenna – have opposite female connectors, one type-N and the other SO-239? This dilemma is solved with the uniquely helpful DX Engineering 400MAX Type-N to PL-259 Low-Loss 50-ohm Coaxial Adapter Cable Assemblies, the perfect alternative to questionable straight adapters. Made for any job (HF, VHF and UHF) and especially for outdoors, one top-quality silver plated Type-N male connector and one patented* Next Generation PL-259 (UHF male) connector terminates our premium, low-loss 400MAX coaxial cable to create these very useful Adapter Cable Assemblies. DX Engineering 400MAX coax features a waterproof jacket made with a highly UV-resistant, Type III-A polyethylene which is ideal for all outdoor feedline applications, including direct-bury installations. With a large 10 AWG stranded copper center conductor, 400MAX NX Series low-loss assemblies are perfectly suited for short or long cable runs and low or high-power level operations. Our 400MAX coaxial cable also features modern, gas-injected foam polyethylene dielectric that cannot absorb moisture and has complete shielding with 100 percent coverage bonded aluminum tape covered by minimum 95-percent coverage tinned copper braid. Regarded in the industry as a top quality low-loss feedline, DX Engineering 400MAX Coaxial Cable is custom made to provide the highest performance and excellent longevity. Coaxial cables with foil-braid dual shielding or foam dielectric are optimized for stationary simplex antenna applications across HF, VHF and UHF. Note: DXE-400MAX is not recommended for use in repeater applications, VHF/UHF duplex, or for a beam antenna rotator loop. DX Engineering 400MAX PL-259 NX Series Coaxial Adapter Cable Assemblies are terminated at one end with the N-Type male connector and the other end with our custom-designed DX Engineering PL-259 (UHF male) connector. Both silver plated connectors feature machine-crimped shields with 360 degrees of complete mechanical and electrical contact for maximum reliability. PL-259 center pins are hand-soldered, and Type-N center pins are machine-crimped by trained assembly techs to assure a proper connection. Next Generation PL-259 connectors feature: * Full diameter, full-length soldered center pins that snugly fit even worn SO-239s * Spacious center pin inside diameter that accepts large conductors and allows generous solder flow * Deep, double-knurled threaded shells for secure finger tightening These high-quality PL-259s have all silver-plated brass shells and bodies with center pins securely mounted in PTFE dielectric for exceptional RF characteristics and power handling. Every assembly is continuity and Hi-Pot tested and then heat-shrink weather-sealed for the ultimate service longevity. You won't find this level of cable assembly quality anywhere else! 400MAX Type-N to PL-259 Low-Loss 50-ohm Coaxial Adapter Cable Assemblies are available in selected lengths and at any length in the Custom Cable Builder, only from DX Engineering! *U.S. Patent D745849
( 8 )
$281.70
DX Engineering Mobile Whip Antennas
DX Engineering Mobile Whip Antennas are the classic 102 in. whip made from the finest heat treated 17-7 PH tapered stainless steel, which resists bending and kinking. 17-7 PH is a precipitation-hardening stainless steel that provides high strength and hardness, excellent fatigue properties, good corrosion resistance, and minimum distortion upon heat treatment. These stainless steel whip antennas are tough. Dissipation tips reduce unwanted static buildup and they fit all 3/8-24 in. threaded mounts. The WP-102 is the standard 102 in. whip, shipped in a 104 in. tube. They resist bending and kinking and are ideal for mobile and portable operations and for Active Receive Antenna Systems. They are also great for use with mobile antenna tuners. No matter what your HF whip antenna application may be, get your stainless steel Mobile Whip Antennas from DX Engineering!
( 19 )
$49.99