Availability
DX Engineering HAM Radio Equipment
DX Engineering offers the top brands in the ham radio industry—none better than our very own DX Engineering products. From our station accessories and antennas...
DX Engineering offers the top brands in the ham radio industry—none better than our very own DX Engineering products. From our station accessories and antennas right down to the cable assemblies, clamps, and hardware that bring it all together, DX Engineering products are made with superior materials, expert engineering—and no compromises! Build a better ham radio station with our heavy-duty rotator, steel masts, thrust bearings, remote antenna switches, fiberglass and aluminum tubing, element and saddle clamps, antenna building parts, our full line of coaxial cables, cable assemblies, connectors, high-quality...
DX Engineering offers the top brands in the ham radio industry—none better than our very own DX Engineering products. From our station accessories and antennas right down to the cable assemblies, clamps, and hardware that bring it all together, DX Engineering products are made with superior materials, expert engineering—and no compromises! Build a better ham radio station with our heavy-duty rotator, steel masts, thrust bearings, remote antenna switches, fiberglass and aluminum tubing, element and saddle clamps, antenna building parts, our full line of coaxial cables, cable assemblies, connectors, high-quality tools and a wide selection of accessories. Maximize performance with DX Engineering verticals and dipoles, add-on kits, baluns, RF chokes and ununs, transmitting array systems, receiving antennas and arrays, our receive phasing unit and more. Keep your station in peak condition with weatherproofing kits, grounding clamps, plates, surge protectors and copper straps. All DX Engineering products are engineered to be the best. See for yourself—shop now!
DX Engineering PCB Mount Right Angle BNC Female Bulkhead Connectors
DX Engineering PCB Mount Right Angle BNC Female Bulkhead Connectors are perfect for any project requiring a PCB (printed circuit board) mounted BNC female connector. These connectors include a locking nut and washer for a secure thru-hole bulkhead connection.
( 1 )
$10.79
DX Engineering Winder and Tie Wrap Combos
DX Engineering Winder and Tie Wrap Combos are designed with the amateur radio portable operator in mind, but they are equally useful for keeping your shack organized. These durable yet lightweight winders are made from FR4 PCB Material, and measure 8 inches by 4 inches. They come in a striking red color and feature a built-in handle, making them easy to spot and handle during portable operations like SOTA and POTA. Their bright color ensures they won't easily get lost in your toolbox, go-bag or in the grass. Each combo includes four winders, ideal for organizing and managing your portable antennas, wire, rope, or even small diameter coax. With the DX Engineering logo proudly displayed on each winder, you can be confident that you are getting a high-quality product. Additionally, each combo comes with a 10-pack of professional quality BongoTies multi-purpose tie wraps, made from highly renewable organic materials: bamboo and natural Hevea rubber. These tie wraps are perfect for securing your wire, rope, or cable to the DX Engineering winder, ensuring everything stays neatly in place.
( 6 )
$24.99
DX Engineering Transmit Receive Interrupter Plug-In Module
DX Engineering Transmit Receive Interrupter Plug-In Module, DXE-TRI-PM, provides essential protection from the station's transmitted energy picked up by a receive antenna that is connected to the DXE-NCC-2 Channel B Receive Antenna Input active front end. This optional custom PCB relay switch device is typically installed in the top Option Slot of the Channel B rear panel board in the NCC-2. When the transceiver keys the RADIO PTT port of the NCC-2, the DXE-TRI-PM can open or ground the receive antenna input and the board output, as selected by jumpers. It functions independently and does not affect or depend on the settings of the NCC-2 Bias-Tee Enable circuit that places DC on the receive antenna feedline for Active antennas. The DXE-TRI-PM is only in the path of the receive antenna input. It also features a Gas Discharge Tube to protect the front end of the NCC-2 while in the receive mode. Adding a second DXE-TRI-PM Transmit Receive Interrupter Plug-In Module to the the top slot of the NCC-2 Channel A rear panel board is recommended. The gas tube provides pulse energy protection during receive and disconnect or grounding protection when the CH A RX ANT IN port is used for a receive antenna that is physically too close to the transmit antenna. Adding a DXE-TRI-PM can provide input protection for the RTR-2 RX ANT IN during receive and by grounding the receive antenna input during transmissions. Alternatively, the DXE-TRI-PM installed in the DXE-DMC-2 Dual Module Chassis can interrupt or ground any receive antenna feedline or a receiver input. Jumper settings select opening or grounding of the receive antenna input and receiver output. This receive feedline RF switch is operated by toggling 13.8 VDC, on for Receive and off when Transmitting. The DMC-2 PCB jumper HD5 selects operating DC from either the 2.1mm power connector or the "Receiver Output" coaxial cable with a user supplied DC Bias-Tee device, such as the DXE-FVI-1 Feedline Voltage Injector. Remote outdoor installation requires a weather resistant cover.
Not Yet Reviewed
$44.99
DX Engineering Clifton Laboratories Z10000 Buffer Amplifiers
DX Engineering Clifton Laboratories Z10000 Buffer Amplifiers may be the products most often requested by radio experimenters and electronics enthusiasts. These are the very popular circuits, designed by Jack Smith, K8ZOA (SK), that are crucial for adding a SDR receiver and panadapter display capabilities to a receiver or transceiver which lacks that feature. The Z10000 Buffer Amplifier's high-input impedance can safely tap the early-stage broadband Intermediate Frequency (IF) signal from inside your radio and feed the buffered and amplified low impedance IF signal to your external SDR receiver. It can then produce a spectrumscope - waterfall display pattern of the receiver signals on a compatible tablet or monitor and PC that is running the appropriate third party SDR software. DX Engineering offers two Clifton Labs Buffer Amplifier Kits to add an IF output SMA connector to the rear panel of your radio: * The DXE-Z10000U-KIT is the Universal Buffer Amplifier Kit that covers 50 kHz to 100 MHz. This kit is designed for those willing to do an internal modification, and will output the IF signal of virtually any receiver or transceiver that has an IF in that range. However, the DXE-Z10000U-KIT can be used as a buffer and low-gain preamp between any low level RF devices that operate in that range. As a buffer, this circuit provides over 90dB of reverse isolation to protect the IF stages of the radio from possible birdies on an SDR receiver input. So, even if your radio has an IF output connector, the DXE-Z10000U-KIT may be used externally, with a user-supplied shielded metal enclosure, to be certain to maintain proper radio operation. * The DXE-Z10000K2-KIT is the Buffer Amplifier Kit specifically tuned to the 4.915 MHz IF signal of the Elecraft K2 transceiver. It offers the same high reverse isolation, plus the added benefit of a tuned IF input with a narrower bandwidth of operation and a potentially a lower noise floor on the output. Both Buffer Amp kits contain the updated, completely assembled and tested DX Engineering Z10000C PC Board with a nominal 6.5 dB gain, retaining all the benefits of the reliable original Z10000B boards. Both kits include our finished printed circuit board, required coaxial cables assemblies with special connectors, insulating materials, and hardware—all for an easier installation than ever before! A third party SDR receiver, software (typically free) and compatible tablet or PC and monitor are required to make use of the IF signal provided by the Z10000 Buffer Amplifier and see the signals that your old radio can hear. Due to the high number of specialized radio installations, no printed instructions are included with these buffer kits. Instructional web links are found on the part detail webpages. Installation web documents and videos are only available online. The legacy that was built by Jack Smith, K8ZOA (SK), with Clifton Laboratories, lives on with select products, exclusively from DX Engineering. NOTE: DX Engineering cannot provide electronic technical support of devices installed in user radios and is not responsible or liable for damages that occur to a user radio due to improper or erroneous techniques during the installation of this product. Unplug all electronic devices when working on them and observe all electrical safety and electrostatic discharge precautions when opening sensitive electronics. Modification of a radio should only be attempted by individuals with advanced experience on electronic circuit repair and operation.
( 24 )
$51.99
—
$61.99
DX Engineering Remote Antenna Switch Replacement Parts
DX Engineering Remote Antenna Switch Replacement Parts are available in the unfortunate or inevitable circumstance where you require repair parts. DX Engineering offers everything from relays to connector plugs to keep your remote antenna switch operating at its highest level. Note: When looking at parts, whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 2 )
$19.99
DX Engineering Replacement Bypass Boards
DX Engineering Replacement Bypass Boards, sold in pairs, are identical to those originally supplied inside of these DX Engineering Devices : Device Model - (number of boards originally installed) DXE-NCC-2 - (6) DXE-RTR-2 - (3) DXE-RPA-2 - (1) DXE-DMC-2 - (1) Installed in each device option slot, they provide a signal path through the unit where an optional plug-in modules or filter and adapter isn't installed. Order these replacements when the originals are misplaced or lost and modules or filters are removed. When the originals cannot be found, order DX Engineering Replacement Bypass Boards for your device.
Not Yet Reviewed
$14.99
DX Engineering Control Line Terminal Boards
DX Engineering Control Line Terminal Boards are designed to provide a flexible and simplified approach to control line surge protection. The DXE-CLTB is a small, 3 inch square printed circuit board (PCB) with four ten-wire compression screw terminal blocks that handle from 14 to 26 AWG conductors and up to 10A. The two outer terminal blocks are for input and output of the control wires and the two 45 degree angled ten-wire compression screw terminal blocks are for connecting the required number of individual electronic surge protection components. This provides for the choice of components to install between the control line and ground for shunt protection. Metal Oxide Varistor (MOV), Gas Discharge Tube (GDT), EMP Suppressor TVS Diodes, RF Bypass Capacitors and other wire lead components are easily connected between each control line conductor and ground with the DXE-CLTB. This open-board, no-chassis concept allows easy mounting on a single point grounding panel, to support simplified inspection and exchange of control line electronic surge protection components that should be done on a regular basis. For effective protection wherever electronic devices are used as a shunt to ground, a low impedance ground is crucial. The DXE-CLTB Control Line Terminal Board has four corner ground plane screw holes. It includes a hardware kit of four self-tapping screws, spacers and external tooth washers, for mounting the PCB on a metal grounding panel inside an enclosure. The DXE-CLTB-M Control Line Terminal Board also includes a 10-pack of MOVs. The following components are available separately for a variety protection projects: DXE-MOV-82VDC-10 Metal Oxide Varistor, Surge Protector, max. 82VDC/50VAC Pack of 10 DXE-GDT-4KV-5 Gas Discharge Tube, Surge Arrestor, 4kV, Pack of 5 DXE-TVS-1500-10 ESD Suppressor, TVS Diode, Bidirectional, 17VDC max., Pack of 10 DXE-CAP-PT1UF-10 Capacitor, Ceramic, 0.1uf, 1kV DC, RF Bypass, Pack of 10
Not Yet Reviewed
$62.99
—
$69.99
YCCC Vertical Array Directional Switch Console Kits
Closeout- Other YCCC array components are no longer available YCCC Vertical Array Directional Switch Console Kits were used to control the YCCC vertical array combiner/controller units, which have been discontinued. They feature an attractive cabinet with an ergonomic direction-selector knob and direction indicating LEDs. Power Pole type connectors are used for DC power connection. These kits require component-level assembly and soldering parts to a PCB. The switching console is installed in the shack, with the control cable run from the switching unit to the combiner/controller unit at the array. Power for the entire antenna system is provided by a 13.8V DC (1A capability or greater) power supply that the user must provide. Use of a "wall wart" type of power supply is not recommended because they generally have very poor DC regulation. These switch units are for use ONLY with YCCC vertical antenna arrays, which are discontinued and no longer available for sale. All inquiries and technical support for these YCCC kits and kit packages is handled by e-mail only, typically within two to three business days: yccctechsupport@verizon.net
Not Yet Reviewed
$60.00
DX Engineering Electronic Protection Components
DX Engineering Electronic Protection Components may be used in a variety of electronics and radio applications. These are wire lead components that can be used on circuit boards or in multi-purpose connection devices. Choose from the components listed for detailed specifications: DXE-MOV-82VDC-10 Metal Oxide Varistor, Surge Protector, max. 82VDC/50VAC Pack of 10 DXE-GDT-4KV-5 Gas Discharge Tube, Surge Arrestor, 4kV, Pack of 5 DXE-TVS-1500-10 ESD Suppressor, TVS Diode, Bidirectional, 17VDC max., Pack of 10 DXE-CAP-PT1UF-10 Capacitor, Ceramic, 0.1uf, 1kV DC, RF Bypass, Pack of 10 ---------------------------------------------------------------------------------------------------------------------------------- This series of protection components are well suited for the DXE-CLTB Control Line Terminal Board that provides a flexible and simplified approach to control line surge protection. The DXE-CLTB is a small, 3 inch square printed circuit board (PCB) with four ten-wire compression screw terminal blocks that handle from 14 to 26 AWG conductors and up to 10A. The two outer terminal blocks are for input and output of the control wires and the two 45 degree angled ten-wire compression screw terminal blocks are for connecting electronic surge protection components. This provides for the choice of components to install between the control line and ground to provide shunt protection. Metal Oxide Varistor (MOV), Gas Discharge Tube (GDT), EMP Suppressor TVS Diodes, RF Bypass Capacitors and other wire lead components are easily connected between the control lines and ground. For effective protection wherever shunt devices are used, a low impedance ground is critical. The DXE-CLTB Control Line Terminal Board has four corner grounding screw holes for mounting on metal standoffs to a metal grounding panel inside an enclosure. DXE-CLTB-M Control Line Terminal Board includes a 10-pack of MOVs.
( 1 )
$11.99
—
$20.99
Clearance
DX Engineering SOTAbeams Low Pass Filter Enclosures
DX Engineering SOTAbeams Low Pass Filter Enclosures provide all of the parts to house your SOTAbeams filter boards to work with your WSPRlite Classic or Flexi. Construction of the enclosure and installation of the filter and is easy to accomplish. ------------------------------------------------------------------------------------ Please note, presently we have two enclosures due to the change made by SOTAbeams: DXE-LPFV1-2-CASE is the new enclosure that fits the newer LOWPASSKIT, LOWPASSKITHB and PCB3LPF v1.2 boards. DXE-SB-LPF-CASE is the old enclosure that fits the original SOTAbeams Low Pass Filter v1.1 boards, which we have renumbered as part SBM-LPFKITDXEPCB. Supplies of these originals are limited, and when they sell out they are discontinued. ---------------------------------------------------------------------------------- Made of aluminum for excellent shielding, the enclosure has a soft grommet to protect the SMA cable and two removable covers for the access holes to allow easy manual band switching of the filter. Here are all of the parts contained in the DX Engineering SOTAbeams Low Pass Filter Enclosure Kits: 1 - Aluminum Case - Top 1 - Aluminum Case - Bottom 4 - Phillips Head Cover Screws 4 - PCB Spacers 8 - Phillips Head Screws for PCB mounting 4 - Internal Tooth Lock Washers 1 - Soft Grommet for SMA Cable 2 - Removable Access Plugs 4 - Stick-on Rubber Feet 1 - Label
( 2 )
$32.99
—
$55.99
$14.85
—
$41.99
DX Engineering Low Power Balun Center Insulators
DX Engineering LPB-B Low Power Balun Center Insulators feature an amazing Hi-CMI 50-ohm 1:1 Balun built onto a Center Insulator board, and a BNC female right-angle connector pre-installed. Designed for portable operations on HF bands, these baluns let you join the fun of making a high-performance Single Band or Multi-Band Linked Dipole! This coax wound toroid achieves an amazing common mode impedance (CMI) curve, with an RF choking capability that far exceeds 'a-few-beads-on-coax' products that are offered by other suppliers, and they can handle up to 250 watts on SSB voice, or 100 watts or less on CW or Digital modes on frequencies below a 2:1 SWR. They are designed for building a center supported Inverted Vee Dipole (not end supported) and are great for use with DX Engineering Nomad Portable Telescopic Masts (sold separately). Great for POTA, SOTA and JOTA, low-cost DIY Low Power Balun Center Insulators are ready for use on a monoband resonant or link-clip multi-band resonant wire antenna for portable or long-term temporary operations. These Low Power Balun Center Insulators are the heart of the DX Engineering Low Power Portable Dipole and Winder Kits.
Not Yet Reviewed
$49.99