Availability
DX Engineering HAM Radio Equipment
DX Engineering offers the top brands in the ham radio industry—none better than our very own DX Engineering products. From our station accessories and antennas...
DX Engineering offers the top brands in the ham radio industry—none better than our very own DX Engineering products. From our station accessories and antennas right down to the cable assemblies, clamps, and hardware that bring it all together, DX Engineering products are made with superior materials, expert engineering—and no compromises! Build a better ham radio station with our heavy-duty rotator, steel masts, thrust bearings, remote antenna switches, fiberglass and aluminum tubing, element and saddle clamps, antenna building parts, our full line of coaxial cables, cable assemblies, connectors, high-quality...
DX Engineering offers the top brands in the ham radio industry—none better than our very own DX Engineering products. From our station accessories and antennas right down to the cable assemblies, clamps, and hardware that bring it all together, DX Engineering products are made with superior materials, expert engineering—and no compromises! Build a better ham radio station with our heavy-duty rotator, steel masts, thrust bearings, remote antenna switches, fiberglass and aluminum tubing, element and saddle clamps, antenna building parts, our full line of coaxial cables, cable assemblies, connectors, high-quality tools and a wide selection of accessories. Maximize performance with DX Engineering verticals and dipoles, add-on kits, baluns, RF chokes and ununs, transmitting array systems, receiving antennas and arrays, our receive phasing unit and more. Keep your station in peak condition with weatherproofing kits, grounding clamps, plates, surge protectors and copper straps. All DX Engineering products are engineered to be the best. See for yourself—shop now!
DX Engineering NCC-2 Receive Antenna Phasing Systems
Imagine adjusting the controls to knock out strong interfering stations or noise—and then being able to copy and log that weak DX station. By successfully combining the right antennas with the advanced phasing capabilities of the NCC-2, this is the operating thrill that every radio enthusiast can enjoy, again and again! DX Engineering NCC-2 Receive Antenna Phasing Systems are variable phasing controllers that combine the 300 kHz- 30MHz received signals from one transmit antenna and one receive antenna, or from two dedicated receive antennas. Combining signals from two stationary antennas physically spaced 1/10 to 1/2 wavelength apart creates an array pattern with signal peaks and dips called nulls. Adjusting the NCC-2 Phase and Balance controls have the effect of electronically rotating or steering that pattern. Steering the null direction to significantly weaken a local or distant interfering signal or noise is known as "Noise Cancelling." This "Noise Cancelling Controller" (NCC-2) can dramatically enhance the reception of weak signals from non-null directions. This "reverse-beam" capability on radio frequencies AM Broadcast through HF can provide amazing benefits for many types of AM DX and SWL receiving and ham radio operating. Work new DX, hear the weak station in casual regional conversations, snag the rare multiplier in contests and hear beyond the noise and interference in dire circumstances. DX Engineering NCC-2 Phasing Systems now feature the built-in RTR Receive-Transmit Interface relay system that expands the exciting benefits of antenna phasing for interference reduction in two ways: * First, the NCC-2 can combine signals from the HF transmit antenna and a separate receive antenna to effectively notch-out strong stations or noise. Almost any Amateur can now enjoy the benefits of antenna phasing and noise-nulling, even those with space limitations for separating the receiving and transmitting antennas. * Second, the user of any standard HF transceiver that lacks a separate receive antenna input can have enhanced reception of noise and signal nulling with the DXE-NCC-2 and two antennas. Rear panel SO-239, F and BNC connectors make the NCC-2 extremely versatile and easy to connect to almost any receiver or HF transceiver up to 200 watts. Redesigned with plug-in modular circuit board sockets, the NCC-2 includes one switched and powered internal slot and two passive internal slots per channel to accommodate these new options: * DXE-RPA-2-PM Receive Preamplifier Plug-In Modules (powered): one per channel for low-signal passive antennas with poor ground conditions * DXE-RG5000HD-PM Receiver Guard 5000HD Plug-In Module (passive): Front-end protection for the NCC-2 and the receiver * DXE-IT-PM 75 to 50 ohm Impedance Transformer Plug-In Module (passive): to match 75 ohm RX ANT feedlines to NCC-2 50 ohm internal impedance * NCC-2 Receive Filter Sets (passive, non-switchable): High Pass, Band Pass and Low Pass Filters for 160, 80, 40 meters typically in stock, with other band filters available individually by special order. DX Engineering NCC-2 Receive Antenna Phasing Systems offer these new additional benefits: * Multi-Color Status Indicating LEDs for Power, RTR Mode and Preamp Power CH A and CH B * New Radio Key Line Input with RX Enable Output-RTR Failsafe to prevent RF damage to NCC-2 and RX equipment * New ACC Key Line Output RCA female 'ground on transmit' pass-through for Amplifier or Accessory * New screw-on 2.1mm DC connector to prevent accidental power cable pull-out * Operates on +13.8VDC @ 2A input to power the NCC-2 and internally jumper set Bias Tee on each RX ANT ports for coax fed Active Verticals and other accessories. Offering new and experienced radio enthusiasts the next level of reception enhancements, DX Engineering model NCC-2 Receive Antenna Phasing Systems in use around the world!
( 19 )
$955.99
DX Engineering AVA-3 Active Matching Units
DX Engineering AVA-3 Active Matching Units are state-of-the-art broadband receive RF operational amplifiers that achieve unparalleled weak signal reception across the radio frequency range from 40 kHz* to 30 MHz. They work as a high impedance buffer between a short antenna element of 6 to 24 feet and an economical 75 ohm feedline. The AVA-3 and a short element are intended to be mounted on a ground rod at ground level in a clear area away from all metal, towers and other antennas. The gain adjustable AVA-3 is the sole upgrade and drop-in replacement for all discontinued receive array element amplifiers including Hi-Z Antennas AMP, PLUS6-AMP, AMP-V2 and AMP-PLUS-V2 as well as DXE-AVA-2 and AVA-1. The DXE-AVA-3 Active Matching Unit is the heart of the new line of DX Engineering Receive Short Element Active Vertical Antennas, DXE-RSEAV-1. Compared to large antennas, this amplified short element method dramatically improves signal-to-noise performance for excellent VLF, LF and HF weak signal reception. Click or tap the title of the listed item for an overview - a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation. The AVA-3 Active Matching Unit provides these features and benefits: • Ultimate frequency coverage of 40 kHz* to 30 MHz for VLF through HF (including the 2200m and 630m Amateur bands) • High Third Order Intercept (TOI) Performance +39dBm for superior strong signal handling equal to top transceivers • Consistent unit to unit gain for greatly improved array performance • Virtually Flat Gain (+/-0.4 dBm) across the entire frequency range • Internally settable gain (default -6, 0, or +6 dBm) for different ambient noise locations and element sizes • Direct DC via second F connector – internal settable choice for separate DC and RF coaxial cables for best performance, or standard Bias Tee DC on the RF coax • Each DXE-AVA-3 Active Matching Unit operates on 12 -15 VDC at 25mA • Element is grounded when power is removed • 75 ohm F connectors support field serviceable RG-6 Quad Shield suitable up to 1,000 feet for VLF through HF *Frequency coverage below 200 kHz requires Direct DC on a separate DC only coaxial cable. Please Note: To achieve the expected reception pattern, multi-element phased arrays depend upon identical gain and phase response from each element. Every individual element amplifier, its grounding, and even its feedline characteristics and length, must be identical to the others in the array. Therefore, when unrepairable failures occur, it is essential to replace and upgrade all the element amplifiers in the array with fully compatible DXE-AVA-3 units.
( 6 )
$139.99
DX Engineering RF PRO Loop Replacement Components
Since DX Engineering manufactures the RF-PRO-1B® Active Magnetic Loop Receive Antenna, we can offer these RF PRO Loop Replacement Components. Available for refurbishing Pixel, InLogis or DX Engineering Active Magnetic Loops, choose one or more of these individual "Original Equipment" components, component set or handy accessory pack that fills your needs. 1. DXE-RFPRO1B-PA Receive Preamplifier has this new part number for the preamp unit only. This is the weatherproof, metal-encased replacement RF PRO 1B Receive Preamplifier that mounts directly onto the loop bracket. Mounting hardware is not included with this replacement low-noise preamp, but it is available in the… 2. DXE-RFPRO1B-OAP Outdoor Accessory Pack. This package contains the insulated shoulder washers, flat washers and nuts to properly mount the preamp. Also included in this outdoor package for the loop installation are the mast mounting V-Bolts and Saddles and the short RG-6 F connector jumper to connect the loop to the preamp, and weather sealer. User supplied RG-6 coaxial cable is used for the long feedline that is run inside to the… 3. DXE-RFPRO1B-PI Power Inserter. This is the indoor unit that puts a well filtered and regulated 20 Vdc power onto the feedline for the preamp. It carries the loop RF to the receiver via the F connector. This unit also disables the power to the preamp when it is keyed by the transceiver amplifier keying line. The Power Inserter is run on 24 Vac from the… 4. DXE-PSW-24A-6AU AC Adapter. This clean power supply is a linear transformer that converts 120 Vac to the 24 Vac at 600 mA required by the Power Inserter. It is has the attached 2.1mm power connector. 5. DXE-RFPRO1B-IAP Indoor Accessory Pack contains the cables and adapter to connect the transceiver RF and keying lines to the Power Inserter. The F connector coaxial cable connects RF from the Inserter to the radio. A supplied F female to PL-259 adapter facilitates that connection, should you radio need it. An RCA phono patch cable is supplied for keying the Power Inserter and a RCA phono y-adapter provides the additional keying line connection for a power amplifier. 6. DXE-RF-30B Complete Component Package is for a system replacement where only an existing RF PRO 1B Loop is available. All of the above individual components, cables and hardware items listed above, items 1 through 5, but not the loop, are included in this DXE-RF-30B package. 7. DXE-PRO-LOOP is the Replacement RF PRO 1B Loop that is ordered by customers who have all other components of their system working. When your damaged or defective loop needs to be replaced, this is the loop only part to order. RF-PRO-1B® Loops may occasionally need a replacement component or hardware package. DX Engineering RF PRO Loop Replacement Components are available right here, at DX Engineering!
( 9 )
$17.49
—
$464.45
DX Engineering Portable Receive Preamplifier-Attenuator
DX Engineering Portable Receive Preamplifier-Attenuator DXE-NL-PRE-ATT-1 – A very handy device to use with your receiver; handheld, portable or base. This attractive, light-weight unit comes completely assembled and tested, and provides a nominal 30 dB gain across the frequency range from 100 kHz through 30 MHz. Powered by an internal 9 volt battery (not included), it features BNC connectors for RF Input and Output, easy to use slide switches and a 'power on' LED when the preamp is on. Attenuation is selected with switches for -10 dB or -20 dB and -30 dB with both. Plus, an AM Broadcast Band Rejection Filter can be switched in or out, as needed. This unit measures 3.25 x 7.00 x 1.00 in. (WHD) and weighs approx. 8.5 oz. with the user supplied 9V battery installed. This preamplifier has a Noise Figure (NF) of 4.5 dB. This Portable Preamplifier-Attenuator is a perfect companion device for use with the DXE-NOISELOOP WD8DSB Portable Receive Flag Antenna Kit, for RFI noise finding and for MW through SW receiving. NOTE: The DXE-NL-PRE-ATT-1 Portable Receive Preamplifier-Attenuator is a Receive Only device. Attempting to transmit RF into this unit will cause damage that is not covered by warranty.
( 14 )
$175.99
DX Engineering NOISELOOP Portable Receive Flag Antenna Kit
DX Engineering NOISELOOP Portable Receive Flag Antenna Kit is based on the design by Don Kirk, WD8DSB. Don's article on this antenna is published in the March 2021 issue of QST Magazine (used by permission). The DXE-NOISELOOP is a kit of parts to build this receive-only portable directional HF loop antenna, which measures only 48 by 24 inches plus 36 inches of mast-handle. It may be used while walking or stationary with your portable HF receiver. Oriented vertically, this loop antenna features a cardioid pattern at the horizon with a deep null of up to 30 dB rejection. It is an excellent tool for locating noise sources from 1.8 through 30 MHz and for low-noise, general coverage reception from the AM broadcast band through 30 MHz. An optional Preamplifier-Attenuator Unit, DXE-NL-PRE-ATT-1, may be attached to the loop mast handle for enhanced operations. An IC-705, a portable SW or a handheld HF receiver are excellent choices for searching for local noise sources with the NOISELOOP, around the neighborhood and even around your own home. This Portable Flag Antenna Kit includes everything needed to make the antenna: fiberglass tubing for the frame and handle, mounting plate, separate PC boards for the bifilar wound transformer and load resistor, antenna wire, coaxial cable with male BNC and stainless steel hardware. Simple hand tools and a solder iron are required for assembly. Included instructions detail assembly. This kit will typically take between 1 and 2 hours to build. The WD8DSB Portable Flag Antenna design has become a real game changer in direction finding of RFI on MF and HF frequencies, and you will also find it an invaluable tool when hunting RFI due to the following key features. *Unidirectional (unlike a tuned loop) *Broadband (unlike a tuned loop, excellent for AM DXing, SWL and Amateur) *Portable (easy to walk with while directional noise finding or HF Fox Hunting) Traditionally Flag antennas are large and designed for stationary use, but the idea for this antenna was to design a Portable Flag. It was designed to be the largest possible (to maximize gain) that would fit inside a car and it's still small enough to maintain a cardioid pattern up through 30 MHz. The portable Flag has an approximate dimension of 2 feet tall by 4 feet long which you (or a helper) can easily walk with while tracking down a signal. Unlike a tuned loop, the Portable Flag is a broadband antenna with unidirectional properties, and it's designed for direction finding from 1.8 to 30 MHz as long as an appropriate preamp is used. It's even useful for direction finding down in the AM broadcast band. The rear of the antenna produces a sharp null when pointed at the signal of interest and the sharp null is often used for direction finding versus using the broad peak which occurs when the front of the antenna is pointed at the signal of interest. Learn more about how to build this antenna kit by clicking on More Detail and the Documentation link for the Instruction Manual. Order your DX Engineering NOISELOOP Portable Receive Flag Antenna Kit here.
( 15 )
$159.99
DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas
New Name...Same Antenna! DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas are designed for low-noise reception of signals within the frequency range of 100-kHz to 30-MHz. Their integral, extra-high dynamic range, low-noise preamplifier is designed for minimum intermodulation distortion in the presence of very high-level signals that would normally overload most preamplifiers. Read more about the exclusive Clifton Laboratories design of the loop's RF-30 preamplifier by clicking "More Details" below. RF-PRO-1B Active Magnetic Loop Antennas, formerly known as the "Pixel Loop" and recently as InLogis, are now manufactured and serviced by DX Engineering. For Amateur Radio operators, AM DXers and Short-Wave Listeners, these active loop antennas are a great way to extend your listening ability. Add DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas to your radios and start hearing more signals with less noise! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 26 )
$809.99
DX Engineering 450 Ohm Ladder Line
DX Engineering 450 Ohm Ladder Line is a transmitting grade low-loss parallel-wire RF feedline featuring a strong, waterproof, UV black polyethylene insulation. To maintain the wire spacing between the conductors while reducing losses, the integral flat plastic material alternates with rectangular openings, which explains the "Window Line" nickname. Capable of handling over 3 kW of RF power, DXE-LL450 is a very low-loss transmission line across HF. It is ideal for exceptionally long feedline runs and for low band wire antennas operated on multiple bands on which the feedpoint impedance can vary significantly, causing mismatch and elevated SWR. Unlike coaxial cables, DX Engineering DXE-LL450 Ladder Line maintains low RF losses at frequencies where antenna feedpoint impedance mismatches cause high SWR. It can provide significantly higher efficiency than coaxial cable when feeding non-resonant antenna systems that are matched with a wide impedance range antenna tuner. DXE-LL450 450 Ohm Ladder Line is a high-quality flat RF feedline, about 0.938 in. wide (15/16") with two 16-gauge copper-clad steel wire conductors (29 AWG x 19 strands) that provide the strength to hold up for long spans between supports without twisting. It exhibits a nominal impedance of around 400 Ohms and a nominal Velocity Factor of 91 percent. For proper performance, LL450 Ladder Line must be installed suspended through the air supported by insulators every 25 ft. or less, kept at right angles and several inches away from other wires, and at least one foot away when run parallel to the earth or large metal surfaces. Installing with an axial twist of one turn per 10 ft. can reduce wind, rain and ice loading, RF coupling and RF noise. DXE-LL450 can be mounted with insulators and suspended on metal or wood posts or run along a wood fence line, only if the fence has no wires or metal mesh that couples RF noise or unbalances the feedline. Often used for non-resonant wire doublet antennas, DXE-LL450 can be more easily terminated outdoors to a DXE-MC20-C4-1 4:1 Balun or a DXE-MC20-1-1T 1:1 Balun. Then, with no inline switches or relays, directly connect the antenna system to a typical indoor wide range antenna tuner using a solid dielectric coax, not foam dielectric, to handle high voltage at high SWR. DXE-213U or DXE-214 Coaxial Cable Assemblies 12 or 18 ft. with PL-259s are perfect for this method, which eliminates the need for a special balanced tuner, and avoids the losses and detuning effects caused by unbalancing when ladder line is routed indoors near wires and ducts. DXE-LL450 is sold by the foot, previously sold as DXE-LL450-CTL, this is the same ladder line with a new part number. It is also available in spools of 500 ft. DXE-LL450-5C and 1,000 ft. DXE-LL450-1K, which are specified for DX Engineering Reversible Beverage System Antennas. NOTE: This type of feedline is intended for MF and HF use and is not suitable for use above 54 MHz. Also consider DX Engineering 300 Ohm Ladder Line, DXE-LL300, an excellent alternative low-loss HF feed line that reduces impedance extremes on non-resonant HF multiband antenna systems.
( 63 )
$1.18
—
$792.99
DX Engineering Ferrite
DX Engineering Ferrites are partially magnetic metal and ceramic mixes available in a variety of forms, including toroid core, bead type and plastic-covered split-bead ferrite called snap-beads. They are used in a myriad of RF suppression applications to mitigate RFI (radio frequency interference) as well as to reduce pulse and other types of RF noise interference. Special ferrites are used for experimentation and electronic circuit building and for making transformers, RF chokes and antenna baluns. The variations of magnetic and non-magnetic metals and non-metal ceramics used to make ferrites are called "Mixes" and each has different radio frequency properties or ranges. Therefore, different mix number ferrites are typically used for different applications within those ranges, determined by decades of experiments by engineers and applications by hams. Each Mix has been assigned a color code to help identify the ferrite, so numerical labeling is not used on the metal. Color coded ferrite can be identified long after the numbered package is discarded or has disintegrated with time. How do they work? Simply use snap-on beads on a cable or wire. An even more effective choke takes a few to several turns of a wire or cable through and around a ferrite snap-on bead or toroid core. This mitigates RFI to, or from, the connected RF noise producing or noise affected electronic device. The results can be very surprising. Solving noise and RFI can be frustrating. Due to the nature of RF and noise interference suppression; the techniques of appropriate use of ferrites can take a bit of trial and error, but are often the best solution for a difficult problem. Use DX Engineering Ferrite for an incredible range of electronic circuits, noise abatement and RF suppression projects. The details of DX Engineering Ferrite mixes and types appear in each product description. Sizes and applications are discussed in "More Details" and in the literature available at the "Documentation" tab of each of these products.
( 197 )
$27.99
—
$116.99
DX Engineering Receiver Guard Electronic RF Limiters
DX Engineering Receiver Guard RG5000HD Electronic RF Limiters are the best choice of inline devices to protect your receiver antenna inputs. The Receiver Guard is a receive antenna input limiter specifically designed to protect a sensitive receiver front-end against high levels of RF and potential damage. At the heart of each Receiver Guard is a highly effective electronic RF limiter covering 500 kHz to 150 MHz with an insertion loss under 0.15 dB up to 50 MHz and under 0.30 dB up to 150 MHz. The multi-stage design includes a gas discharge tube for maximum pulse energy protection. The DXE-RG5000HD rejects 10 watts of catastrophic receive antenna feedline RF while passing a maximum signal of about 87 dB over S-9, which is only 25 mw, a signal level that is well below the point of front end damage. Receiver Guards are a must for multiple radio contesting stations and they provide low-cost front-end "insurance." Use them in these common high-RF situations: - Receive antennas in very close proximity to transmit antennas - Field-day operations with many transmitters in close range - Multi-transmitter contesting sites - Neighboring Amateur and CB operators - Frequent high-power mobile encounters Extensively tested and proven in real-world stations, the Receiver Guard works for all radios and offers the ultimate performance required by the upper tier of transceivers tested to have the best narrow-spaced third-order dynamic range or published RMDR (Reciprocal Mixing Dynamic Range). These are passive electronic limiters, so competitive contesting stations use separate band filters in addition to the Receiver Guard. When there are high levels of RF on your receive antennas, the DX Engineering Receiver Guard generates far less harmonic noise than other limiters on the market, which allows your station to continue to operate safely and competitively. At normal HF signal levels the RG5000HD operates continuously with no effect on the performance of your station while providing the best possible protection for your radio. Here are key Receiver Guard features: * Keeps stray high levels of RF from damaging your receiver input * Ideal for separate 160 and/or 80 meter receive systems with large pulse and RF energy capture area * Uses state of the art components for maximum protection of receivers * Under 6 ns response time * Multi-Stage protection * Very low insertion loss * Uses BNC type connectors to avoid accidental connection to a transmit feedline * Has been developed and tested in world-recognized multi-multi contest station K3LR Specifications - DX Engineering Receiver Guard model DXE-RG-5000HD - Frequency Range: 0.5 through 150 MHz - Insertion Loss: < 0.15 dB up to 50 MHz, < 0.3 dB 50 MHz up to 150 MHz - VSWR: < 1.2:1 - Maximum Output Level at 10 W input: +14 dBm (0.025 W) - Maximum Power Handling: 10 W CCS (Continuous Commercial Service) - Device Impedance: 50 to 75 ohms, unbalanced - Connectors, Input and Output: BNC female Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. What happens if the receive antenna is extremely close to the transmit antenna, or there is an antenna support or other system failure that causes a high RF level to enter the receive antenna input? A DX Engineering Receiver Guard can save the day! Order yours now.
( 37 )
$119.99
DX Engineering Receive Short Element Active Vertical Antennas
DX Engineering Receive Short Element Active Vertical Antennas (the RSEAV Antennas) offer excellent low noise radio frequency reception from 40 kHz to 30 MHz. Better receiving performance than full-size transmit antennas and other active makes the DXE-RSEAV-1 the best choice on the market for VLF through HF reception, including long-distance AM broadcast, Medium Wave and Shortwave (SWL), and new low-frequency Amateur bands, DXing, contesting, and everyday HF operations. Click on a listed product title and Scroll Down to see additional important information. A complete product description appears below the Specifications Overview. Instruction manual links appear in the Documentation section. The sleek and stealthy DXE-RSEAV-1 includes a high-quality three-section 8.5 ft. (2.6m) aluminum tubing whip, insulated mounting plate and the completely new DXE-AVA-3 Active Matching Unit. Its state-of-the-art broadband operational amplifier design works as a high-impedance buffer between the short antenna element and RG6U 75-ohm coax. When installed in the appropriate location, RSEAV antennas provide significantly better weak signal reception than other active receive antennas and full-size transmit-capable antennas, with substantially reduced noise and lower spurious signal interference. Receive Short Element Active Vertical Antennas are intended to be mounted on a ground rod at ground level in a clear area away from all metal, towers and other antennas. They are sold individually (DXE-RSEAV-1), or with a bias tee (DXE-RSEAV-1FVI) and DXE-RSEAV-1 Receive Short Element Active Verticals set a new standard for "Active Receive Vertical Antennas" replacing legacy DXE-ARAV-3, ARAV-2, ARAV-1 and AL-24 versions. Use multiple DXE-RSEAV-1 for all 4 and 8 element DX Engineering Receive Arrays – all 3, 4 and 8 element Hi-Z Antennas Arrays – and 2 element receive arrays with DXE-NCC-2 and NCC-1 Variable Phasing Controllers. The DXE-RSEAV-1 is designed to be a very low-gain, low-noise antenna for greatly improved signal-to-noise performance over a very wide range of frequencies. In a proper single or multi-element array installation, this Receive Vertical antenna will attenuate high-angle skywave signals, which is the goal for a low band DXing receive antenna. Low-angle, long-range DX signals are easier to copy with a good radio and DX Engineering Receive Short Element Active Vertical Antennas. Please Note: To achieve the expected reception pattern, multi-element phased arrays depend upon identical gain and phase response from each element. Every individual element amplifier, its grounding, and even its feedline characteristics and length, must be identical to the others in the array. Therefore, when unrepairable failures occur, it is essential to replace or upgrade all the elements in the array with identical, fully compatible DXE-RSEAV-1 antennas or DXE-AVA-3 units.
( 3 )
$249.99
—
$1,999.92
DX Engineering CW1812OR Heavy-Duty Spec Rotator Cable
Made to our specifications, DX Engineering CW1812OR Heavy-Duty Spec Rotator Cable is a rugged, waterproof, direct-bury and UV-resistant cable that we offer cut-to-length. This cable is required by the DXE-RT4500HD Heavy Duty Rotators, and OR-2800 positioners, for runs up to 400 ft., this control cable is also useful for prop-pitch motors and many other high-torque, heavy-duty rotators that use two-wire DC drive and a shielded pair for pulse position feedback. This is also great cable for relay power control and remote preamplifier systems located far from the station. To ensure the pulse positional information arrives to your controller without RF or noise, DX Engineering CW1812OR features a twisted pair of 18 AWG 16-strand tinned copper conductors with orange and blue PVC insulation that are encased in an aluminum tape foil shield, complete with an a tinned-copper 18 AWG 7-strand drain wire. The positioner motor is served with two 12 AWG 65-strand low-resistance, unshielded tinned-copper conductors with black and white PVC insulation, wrapped in clear tape. This heavy cable bundle is covered in a tough, 35 mil waterproof black polyethylene jacket that is about 0.375 inch diameter overall. This direct-bury capable and UV-resistant cable has markings that designate DXE-CW1812OR 18/2C with Shield plus 12/2C, with 300V and 75 degrees Celsius ratings, and RoHS compliance. Your investment in a high-quality, heavy-duty rotator deserves the proper control cable. DX Engineering CW1812OR Heavy-Duty Spec Rotator Cable is ready to be ordered in any US ft. length for your directional antenna positioning system.
( 5 )
$2.05
DX Engineering 300 Ohm Ladder Line
DX Engineering 300 Ohm Ladder Line is a transmitting grade low-loss parallel-wire RF feedline featuring a strong, waterproof, UV black polyethylene insulation. To maintain the wire spacing between the conductors while reducing losses, the integral flat plastic material alternates with rectangular openings, which explains the "Window Line" nickname. Capable of handling over 2.5 kW of RF power, DXE-LL300 is a very low-loss transmission line across HF that is ideal for long feedline runs. It is an excellent feedline choice for a low band non-resonant wire antenna operated on multiple bands on which the impedance varies significantly, causing mismatches and elevated SWR. Unlike coaxial cables, DX Engineering DXE-LL300 Ladder Line maintains low RF losses at frequencies where impedance mismatches cause high SWR. The lower impedance of DX Engineering 300 Ohm Ladder Line is actually better suited than 450 ohm ladder line for limiting the impedance extremes of non-resonant multiband antennas. It can provide significantly higher efficiency than coaxial cable for feeding non-resonant antenna systems that are matched with a wide impedance range antenna tuner. DXE-LL300 Ladder Line is a flat, high-quality RF feedline, about 0.438 in. wide with two 18-gauge copper-clad steel wire conductors that provide the strength to hold up for long spans between supports without twisting. It exhibits a nominal impedance of 275 Ohms and a nominal Velocity Factor of 88 percent. For proper performance, LL300 Ladder Line must be installed suspended through the air supported by insulators every 25 ft. or less, kept at right angles and several inches away from other wires, and at least one foot away when run parallel to the earth or large metal surfaces. Installing with an axial twist of one turn per 10 ft. can reduce wind, rain and ice loading, RF coupling and RF noise. DXE-LL300 can be mounted with insulators and suspended on metal or wood posts or run along a wood fence line, only if the fence has no wires or metal mesh that couples RF noise or unbalances the feedline. Most often used for non-resonant wire doublet antennas, dipoles, and inverted-vees, DXE-LL300 can be more easily terminated outdoors to a DXE-MC20-1-1T 1:1 Balun. Then, with no inline switches or relays, directly connect the antenna system to a typical indoor wide range antenna tuner using a solid dielectric coax instead of foam dielectric, to handle high voltage at high SWR. DXE-213U or DXE-214 Coaxial Cable Assemblies 12 or 18 ft. with PL-259s are perfect for this method, which eliminates the need for a special balanced tuner, and avoids the losses and detuning effects caused by unbalancing when ladder line is routed indoors near wires and ducts. DXE-LL300 is sold by the foot, previously sold as DXE-LL300-CTL, this is the same ladder line with a new part number. It is also available in spools of 500 ft. DXE-LL300-5C and 1,000 ft. DXE-LL300-1K. NOTE: This type of feedline is intended for MF and HF use and is not suitable for use above 30 MHz.
( 25 )
$0.77
—
$496.99
DX Engineering ISO-PLUS Ethernet RF Filters
DX Engineering ISO-PLUS Ethernet RF Filters are very effective EMI Suppressors that are quickly and easily connected inline on Cat5e or Cat6 network cables. Their patented* design provides common mode RF interference and EMI noise filtering of radio frequencies from well below 1 MHz to 100 MHz and beyond. DX Engineering ISO-PLUS Ethernet RF Filters have no effect on throughput; Ethernet data signal levels and speed remain unchanged. *US Patent No. 11,211,679 B2 Electromagnetic interference (EMI), also known as RF interference (RFI), can be imposed onto your received radio and data signals from many electronic devices normally found around a residence, a radio room or a business network. Areas of major concern are the Gigabit Ethernet Cat5(e) and Cat6 cables used for network (LAN) connections between personal computers, printers, multi-port switches, cable modems, routers and radio transceivers, and between many other devices. DX Engineering ISO-PLUS RF filters, installed on both ends of Ethernet cables, work two ways. First, they can mitigate RF interference caused to the Ethernet connected device. Second, they can reduce interference to radio receivers and other Ethernet devices that is caused by RFI or EMI generated by an Ethernet connected device. ISO-PLUS filters are sold in pairs and are normally installed at each end of an Ethernet cable; one filter at the RJ-45 Ethernet plug of the first device and the other filter at the RJ-45 Ethernet plug of the second device. Each ISO-Plus comes with one six inch shielded RJ-45 patch cable (color may vary). They are designed to be installed in pairs; offered in a 2 filter package DXE-ISO-PLUS-2 or a 10 filter package DXE-ISO-PLUS-10. Click "More Details" below for additional information. DX Engineering ISO-PLUS Ethernet RF Filters are an important tool to improve productivity and radio reception of weak signals. "If you can't hear them, you can't work them." Order ISO-PLUS Ethernet RF Filters exclusively from DXEngineering.com
( 49 )
$81.99
—
$355.99
DX Engineering Coaxial Connectors
The DX Engineering Coaxial Connectors shown here include two-part, silver-plated PL-259 and Type-N connectors designed to be crimped or soldered to the shield and soldered to the center conductor. These connectors deliver excellent performance for HF, VHF, and UHF applications. DX Engineering's PL-259 and Type-N connectors feature silver-plated brass throughout the outer and inner conductors and use PTFE dielectric—the best RF insulator—for very low loss and high electrical breakdown strength. Also available are DX Engineering Silver-Plated Reducers, which adapt standard solder-type PL-259 and Type-N connectors for use with single-shield RG-8X and RG-58U coaxial cables. While many types and grades of coaxial RF connectors are offered on the market, DX Engineering provides only top-quality connectors with silver-plated brass bodies and PTFE dielectric. These two-part solder-style connectors fit RG-213, RG-8U, RG-8X/LMR240 and other standard 0.405 in. single-braid shield coaxial cables intended for soldering*—but not 400MAX or LMR-400 double-shield cables. These solder-shield and solder-center connectors are the preferred choice for many Amateur Radio operators installing single-braid shield coaxial cables. Order your DX Engineering Coaxial Connectors and Reducers today! *NOTE: To prevent noise issues, modern engineering practice has determined that double shield cables that have one foil and one braid should not be soldered to the braid, including DXE-400MAX and LMR-400 style cables. Those cables should be terminated with crimp shield or clamp shield style connectors, also available from DX Engineering.
( 116 )
$11.99
—
$43.99
RG-400 High-Isolation Double-Shield 50-ohm Coaxial Cable
RG-400 is a high-isolation 50-ohm coaxial cable that is ideal for critical, very low signal level, low noise applications as well as high power handling for RF equipment interconnections. Proper terminations on RG-400 cable assemblies provides extremely low crosstalk and very low noise ingress with a double-braid shielding effectiveness that results in over 100dB of isolation across HF frequencies. This cable is Mil-Spec equivalent to M17/128-RG400. RG-400 is compatible with N-type and PL-259 solder type connectors with UG-175S reducers for RG-58 size cables. NOTE: RG-400 has an OD of 0.195 inch and is NOT the same as DXE-400MAX which is 0.405 inch OD. RG-400 Specs: Center Conductor: Silver Plated Copper – 20AWG Center Conductor Diameter: 0.0384 in. (19 strands of 0.008 in.) Dielectric: PTFE (Polytetrafluoroethylene) Dielectric Diameter: 0.116 in. Shield Construction: Two Layers of Braided Silver Plated Copper Shield Outer Diameter: 0.156 in. Jacket: FEP (Fluorinated ethylene propylene) Cable Overall Diameter: 0.195 in. Minimum Bend Radius: 1.0 in. Weight (lbs. per 1,000 ft.): 50.0 Capacitance: 29.4 pF/ft. Maximum Voltage: 1,900 V Velocity factor (VF), nominal: 69.5% (0.695) Click "More Detail" for more information
( 11 )
$7.49
DX Engineering XB-5 Hexx Beam HF Antenna
The DX Engineering XB-5 Hexx Beam is a lightweight directional five-band HF antenna for the 20, 17, 15, 12 and 10 Meter bands that is ideal for permanent or temporary installations. What are the benefits of this oddly shaped HF beam antenna? There are many, such as its small turning radius and full legal-limit power handling on all bands. But the most important are that the XB-5 Hexx Beam receives signals very well and transmits RF very efficiently. Its special configuration of full-size wire elements reject noise so more signals are heard. Months of development have culminated in this advanced antenna design for easier assembly, improved SWR and better bandwidth while maintaining excellent front-to-back performance. The DX Engineering XB-5 is our best Hexx Beam to date. DXE-XB-5 is the complete HF antenna package of specialized DX Engineering XB-5 Hexx Beam components; some are new and pre-assembled. These essential components include the patented* Hexx Hub and the Stainless Steel and PTFE Rigid Flat Feeder which is fully balanced with the Maxi-Core® 20 1:1 Current Balun and Mount. Also included are the all-new Heavy-Duty "Ice" Spreader Support Ropes with thimbles and stainless steel carabiners, better fiberglass Center Post and Spreaders, the Heavy-Duty Mast Mount, newly configured Element Wire Kits with the unique DX Engineering Wire Guides and innovative Element Spacer Insulators. The DX Engineering XB-5 Hexx Beam design has a number of important advantages over other Hex Beams or a mini-Yagi: - New, easy and faster assembly - fewer parts to speed completion of the antenna project - Pre-made 4.4 mm heavy duty "ice" support ropes with thimbles and stainless steel carabiners - High CMI Balun (1:1 5kW) and Mounting Bracket included - New Heavy-duty Mast Plate with DXE Saddle Clamps - Strong fiberglass without slits - Pre-sized and pre-drilled element spacer insulators designed for simple antenna assembly and tuning adjustment - Improved SWR band coverage - Small turning radius - the XB-5 Hexx Beam has a turning radius of 11' - Gain - 5 dBi (3 dBd), depending on band - similar to 2 element Yagi, far exceeding the performance of multi-band mini-beams - Front-to-Back – greater than 20 dB, depending on band - Wind balanced - Hexx symmetry reduces torque on the rotator - Light weight – about 25 lbs. fully assembled - Wind load – only 5 square feet wind surface - Can be turned with a light duty rotator - Performs well at low heights - good results at 25 to 35 feet above ground - Handles full legal limit power – no power restriction as on competing antennas - Low Noise results - approaches performance of closed loop antennas - Full length HF antenna elements - no lossy coils or traps - Five-Band Stainless Steel/PTFE Rigid Feeder System – balanced for best pattern - Requires no matching network - direct single 50 ohm coax feed The DX Engineering XB-5 Hexx Beam is one of the best performance values on the market for a directional HF antenna. *(US Patent No. 8,669,911, US Patent No. D 624,060, British Patent No. GB248003 B)
( 4 )
$1,247.92
DX Engineering LPFC-BNC Low Power Feedline Chokes
DX Engineering LPFC-BNC Low Power Feedline Chokes are intended to be placed in line with coaxial cable fed antennas and equipment used for portable operations, including POTA and SOTA activations. The DXE-LPFC-BNC coax wound toroid achieves an amazing common mode impedance (CMI) curve, with an RF choking capability that far exceeds the CMI of 'a-few-beads-on-coax' product that is offered by other suppliers. Actually, these "Low Power" Feedline Chokes can be used in any station that runs less than 250 watts SSB, 100 watts CW or Digital. ________________________________________ DX Engineering Low Power Feedline Chokes features and benefits: - A unique, lightweight form, with clear heat shrink over the choke* - Light enough to hang inline at the feedpoint of any portable HF antenna. - BNC female connectors for easy connection to portable antennas and gear. - Much higher CMI that other portable, low power chokes, especially across the 40 through 6 meter bands. - Frequency range of 1.8 through 54MHz. - RF Power Handling up to 250 watts PEP SSB, 100 watts CW and Digital (at SWR <2:1). - Recommended for general use to isolate either end of a coaxial cable. * Not intended for permanent outdoor use unless mounted inside a weatherproof enclosure. ________________________________________ These chokes are ideal for use at any HF transceiver or receiver antenna connection, portable, mobile or base. In most cases, DXE-LPFC-BNC prevents RFI, stops stray RF and noise on the feedline from getting into the receiver that would cover up weak signals, and improves efficiency of the antenna system. For any station, including POTA and SOTA, mobile and base, DX Engineering Low Power Feedline Chokes keep the RF controlled.
Not Yet Reviewed
$59.99
DX Engineering RG-400 High Isolation Coaxial Cable Assemblies
DX Engineering RG-400 High Isolation Coaxial Cable Assemblies bring to your RF systems the same quality and capabilities that are demanded of military and aerospace installations. Here are few reasons why we offer these advanced RG-400 cables for your critical applications: - Extremely high isolation from noise and signals from adjacent cables - Very high power handling - 2.75 kW at 30 MHz - Stranded silver plated copper center conductor for extreme efficiency - PTFE dielectric for exceptional dimensional stability, low loss and very high power handling - Silver plated copper braided double shields for very high isolation - Tough, waterproof fluorinated ethylene propylene (FEP) - MIL-C-17 jacket DX Engineering RG-400 cable assemblies are terminated with the classic silver plated Amphenol 831SP PL-259 and UG-175 reducers or BNC Male connectors. DXE-RG400 is specifically recommended for short length cable assembly use in VHF/UHF duplex repeater applications. RG-400 may be the same size as RG-58A/U, but it is an aerospace-level performance cable with dramatically improved ratings in all categories. NOTE: RG-400 is a 0.195 in. diameter cable. RG-400 is NOT related in any way to DXE-400MAX or LMR-400 cables which are 0.405 in. diameter. Order DX Engineering RG-400 High Isolation Coaxial Cable Assemblies here.
( 18 )
$92.99
—
$141.99
DX Engineering RPA-2 Modular Receive Preamplifiers
DX Engineering RPA-2 Modular Receive Preamplifiers are newly designed versions of the RPA-1 with internal slots for accessory modules. They accommodate the addition of the one optional plug-in module, such as the 75 to 50 ohm Impedance Transformer Module, or the Receiver Guard 5000HD Plug-In Module, or the DX Engineering Clifton Laboratories Z10020 AM Band Filter Module. DXE-RPA-2 preamps have very low internal noise and are optimized for the 300 kHz to 35 MHz range. They help you hear the weakest signals without artificially raising the noise. Meticulous craftsmanship and durable, robust components allow these preamplifiers to withstand high signal levels while providing superior dynamic range and third-order intercept performance that equals or exceeds most receiver and transceiver front-ends. RPA-2 Receive Preamplifiers have key features added, as requested by our tech-oriented customers and enthusiasts: - Internal slot accommodates the optional 75 to 50 ohm Impedance Transformer Module to accomplish typical receive antenna feedline to equipment transitions without losses -Also allows direct connection to 50 ohm receive antenna feedline BNC connectors with no transformer required - Internal slot for DXE-RG5000HD-PM Receiver Guard 5000HD Plug-In Module – Front-end protection for the RPA-2 - Secure BNC female connectors and receive-system friendly F female connectors remain; both prevent accidental connection to transmitting devices with UHF connectors - A green LED indicates when DC power is present and the preamplifier circuit is engaged. - An ingenious positive-capture threaded-sleeve 2.1 mm power connector that ensures the DC power cannot be accidentally disconnected from the RPA-2. - Alternatively, a simple internal jumper change allows the RPA-2 to be powered by DC on the feedline While many other common preamplifiers suffer from harmonic distortion, RPA-2 Modular Receive Preamplifiers include our exclusive, advanced push-pull design that eliminates harmonic distortion. Their high quiescent current increases their ability to handle strong signals without distortion or overload. These high performance devices must be powered with a well filtered and regulated DC power supply and will offer maximum performance at 12 to 18 Vdc input. Please do not use a cheap wall transformer or noisy switching wall-wart to power these top-of-the-line preamplifiers. Indoor installation at the back of the radio is recommended for RPA-2. For those who want to place them in an enclosure at a receive antenna system, a handy internal jumper allows these new units to be powered on the coaxial cable. RPA-2 Receive Preamplifier Specifications: -Input and Output Connectors, female: BNC and F -Frequency Range: 300 kHz to 35 MHz -Gain: 16 dB, +/- 1.5 dB (over entire frequency range) -Output Third Order Intercept: 43 dBm -Noise Figure: 3.5 dB -One dB Compression Point: +26 dBm (400 mW output) -Dynamic Range, IM3: 110 dB or greater (500 Hz bandwidth) -Power Requirement: 12-18 Vdc, 140 mA max. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering RPA-2 Modular Receive Preamplifiers offer superior receiving results on crowded medium wave and shortwave bands as well as on the ham bands. SWLs and Radio Amateurs around the world have come to rely on the advanced operational performance of DX Engineering Receive Preamplifiers. You will be able to pull in the weakest signals and snag that rare one, under the most difficult conditions, when you need it the most. Order your DX Engineering RPA-2 today!
( 14 )
$269.99
DX Engineering RTR-2 Modular Receive-Transmit Interfaces
DX Engineering RTR-2 Modular Receive-Transmit Interfaces provide the easiest and safest method for connecting a dedicated receive antenna to an HF transceiver that does not have a separate receive antenna input. Placed inline with the transceiver's antenna connector, the RTR-2 does the job of a 200 watt T/R relay using the amplifier keying line for failsafe protection, so your transmitted energy cannot go to the receive antenna. Three internal Plug-in Module option slots provide added features and protection: * DXE-RPA-2-PM Receive Preamplifier Plug-in Module * DXE-TRI-PM Transmit Receive Interrupter Plug-In Module * DXE-IT-PM 75 to 50 ohm Impedance Transformer Plug-in Module DX Engineering RTR-2 Modular Receive-Transmit Interfaces allow the standard transceiver owner to enjoy the advantages of separate receive antennas. For the unswitched receive antenna (RX ANT) port on expensive transceivers, the RTR-2 interface also adds inexpensive failsafe protection. The receive antenna line can be opened or grounded with the optional DXE-TRI-PM Interrupter plug-in module. The RTR-2 is a very useful device for many applications, including: * Connection of external receiving antennas to transceivers lacking external antenna ports * T-R antenna switch for older equipment using separate transmitters and receivers * Interfacing antennas to older phasing or noise cancelling systems * Addition of a switchable receive preamplifier to any transceiver or transmitter and receiver combination * Excellent failsafe receiver protection for close-spaced transmit and receive antennas, without performance degradation of diode circuits of other devices. RTR-2 units feature a unique, failsafe connection method that prevents the hot switching and timing errors that are common on other transmit/receive relays. RTR-2 interfaces switch fast enough for partial break-in CW operation. There are many simple applications for the new RTR-2 and now internal modules can add dramatically improved reception of those really weak signals on the crowded HF bands! DX Engineering RTR-2 Modular Receive-Transmit Interfaces enable operators to enjoy improved reception with any low noise receiving antenna system. This shielded enclosure relay system provides a safe method of connecting a receive antenna, such as a Beverage, Active Receive system, or other receiving accessories to your radio. Major features that make the DX Engineering RTR-2 Receive Antenna Interfaces your best choice for a receive T/R system device: * New Status Indicating Color-changing LEDs * Three internal slots for new DX Engineering modules * New Key Line Out connector for Amplifier * New internal jumper for placing DC on the Receive Antenna feedline for Active or Loop receive antennas * Attractive and heavy stainless steel enclosure * 200 watts RF switching capability * Supports CW partial break-in * Main transmit antenna connector is SO-239 (UHF female) * Radio RF connector is SO-239 (UHF female) * Receive antenna input is 75 ohm F connector * Receive outputs are standard 75 ohm Type F connectors * Inputs are 50 ohm BNC or 75 ohm F (Optional transformer module available) * Safe switching--transmit antenna is always connected to transceiver on power-off * Hot switching lockout--disables receive antenna during transmit mode (Optional DXE-TRI-PM can be set to short the RX ANT line) * Versatile--allows inclusion of Optional RF preamplifiers and other plug-in modules * Simple 13.8 Vdc input for all operations An indispensable accessory for the DX enthusiast and useful for any Amateur's shack, DX Engineering RTR-2 Modular Receive-Transmit Interfaces can help you expand and improve your station's antenna connections and the protection of your equipment.
( 12 )
$375.99
DX Engineering Maxi-Core® 20 Feedline Choke and Mount Kits
DX Engineering Maxi-Core® 20 Feedline Choke and Mount Kits, DXE-MC20-FCM, provide current balance and feedline isolation on coaxial cables for all types of HF through 6 meter antennas including verticals, rotatable dipoles, directional beams and Yagi antennas. Intended for 50 ohm feedlines operated at low SWR, this combination of mounting plate bracket and effective 50 ohm RF choke handles full-legal-power-plus and provides higher common mode impedance (CMI) across a greater frequency range than competing feedline choke and line isolators and previous DX Engineering and Comtek models. High CMI across the AM Broadcast band and the HF/6M spectrum is essential to provide sufficient suppression of unwanted transmitted and received RFI/BCI current on the feedline shield exterior. With less noise and interference you will hear and be heard using a DX Engineering Maxi-Core® 20 Feedline Choke and Mount Kits. DX Engineering Maxi-Core® 20 Feedline Choke and Mount Kits bring new parts together to work on many types of antennas. They provide improved RF isolation and current balance at either end of the feedline and at the feedpoint of a vertical, a beam, rotatable dipole or other antenna feedline. This is a unique perpendicular choke mount that allows a beneficial separation between the ferrite of the choke and the antenna boom or mast, resulting in improved choking performance compared to a choke mounted on metal. The UV black high-strength polymer mounting plate provides additional isolation and holes for different mounting positions for the choke, horizontal or vertical. Stainless steel hardware is included to attach the plate to the stainless steel mounting bracket, which has laser cut holes for one of five optional DX Engineering Saddle Clamps to cover mast or boom sizes from 1 to 2 in. and 2.375 to 3 in. Click "More Detail" for additional information and click Suggested Parts for required optional items including one saddle clamp to fit your mast or boom and coaxial cable assemblies. Maxi-Core® 20 Feedline Chokes features high quality silver-plated PTFE dielectric SO-239 (UHF female) connectors. The SO-239 connector limits power handling to 5 kW or less at low SWR and reduced power at elevated SWR. These feedline chokes exhibit very low insertion loss and inherently low SWR. They are built into a convenient weather resistant NEMA enclosure with weep holes at all four corners of the "bottom" side of the enclosure, to vent properly when mounted vertically or horizontally for all types of antennas. Make your antenna play to its potential; reduce RFI and improve reception with DX Engineering Maxi-Core® 20 Feedline Choke and Mount Kits.
( 4 )
$207.98
DX Engineering High CMI Receive Feedline Chokes
DX Engineering High CMI Receive Feedline Chokes achieve exceptionally high isolation between the input and output connector shields to effectively block common-mode RF noise and unwanted signals that collect on 50 or 75 ohm receive antenna feedlines. Ongoing research and development by the design team at DX Engineering has produced two bidirectional Receive Feedline Chokes; a 50-ohm model with BNC female connectors and a 75-ohm model with Type-F female connectors. Both chokes cover the RF frequency range 100 kHz through 30 MHz. They exhibit very high common mode impedance* (CMI typically over 8,000 ohms across the 160, 80, and 40 meter bands) and feature DC pass capability up to 700 mA at 13.8VDC, with extremely low SWR and negligible insertion loss. Affordable DX Engineering High CMI Receive Feedline Chokes will be considered the best, most versatile receive chokes ever produced for typical low band receive antenna applications.
( 3 )
$59.99
—
$64.95
Headset and Foot Switch Packages
DX Engineering Headset and Foot Switch Packages are a great combination to move your operation away from an open speaker and local desk or hand microphone. Simply choose your headset and/or headset color and the accompanying foot switch is your Push to Talk! DX Engineering foot switches are a great match with high-quality Heil Sound headsets. A radio-specific headset adapter cable is required to properly connect the headset and foot switch to your transceiver. There are too many different transceivers to make Headset and Foot Switch Packages for each one! Search Headset Adapter Cables on this web site to find the right one for your transceiver. Headsets provide a convenient way to limit ham shack noise and produce quality, consistent transmit audio. Get on the headset bandwagon with DX Engineering Headset and Foot Switch Packages. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 4 )
$294.99
—
$450.99
DX Engineering Maxi-Core® 20 1:1 Balun and Mount Kits
DX Engineering Maxi-Core® 20 1:1 Balun and Mount Kits, DXE-MC20-1-1BM, provide current balance and feedline isolation for HF through 6 meter verticals, rotatable dipoles, directional beams and Yagi antennas. Intended for 50 ohm feedpoint antennas that offer low SWR, this combination of mounting plate bracket and effective 1:1 RF choke balun handles full-legal-power-plus and provides higher common mode impedance (CMI) across a greater frequency range than competing balun models and previous DX Engineering and Comtek models. Their high CMI across the AM Broadcast band and the HF/6M spectrum is essential to provide sufficient suppression of unwanted transmitted and received RFI/BCI current on the feedline shield exterior. With less noise and interference you will hear and be heard using a DX Engineering Maxi-Core® 20 1:1 Balun and Mount Kit. A similar kit was formerly known as the Vertical Feedline Current Choke. But, the Maxi-Core® 20 1:1 Balun and Mount Kit bring new parts together to work on many types of antennas. They provide improved RF isolation of the feedline and current balance at the feedpoint of a vertical, a beam or rotatable dipole. This is a unique perpendicular mount that allows a beneficial separation between the ferrite of the balun and the antenna boom or mast, resulting in improved choking performance compared to a balun mounted on metal. The UV black high-strength polymer mounting plate provides additional isolation and holes for different mounting positions for the balun, horizontal or vertical. Stainless steel hardware is included to attach the plate to the stainless steel mounting bracket, which has laser cut holes for one of five optional DX Engineering Saddle Clamps to cover mast or boom sizes from 1 to 2 in. and 2.375 to 3 in. Maxi-Core® 20 Baluns feature 1/4-20 stainless steel hardware and a high quality silver-plated PTFE dielectric SO-239 (UHF female) input connector. The SO-239 connector limits power handling to 5 kW or less at low SWR and reduced power at elevated SWR. These baluns exhibit very low insertion loss and inherently low SWR. Maxi-Core ® 20 Baluns are built into a convenient weather resistant NEMA enclosure with weep holes at all four corners of the "bottom" side of the enclosure, to vent properly when mounted vertically or horizontally for all types of antennas. Click "More Detail" for additional information and click Suggested Parts for optional items required, including one saddle clamp to fit your mast or boom, and a wiring kit or flexible copper strap to connect the balun to the antenna feedpoint terminals. Make your antenna play to its potential; reduce RFI and improve reception with DX Engineering Maxi-Core® 20 1:1 Balun and Mount Kits.
( 4 )
$207.98