Filters
ELAD Parts and Accessories
ELAD TM-2 Console for SDR Radios
ELAD TM-2 Console for SDR Radio is a remarkable desktop USB controller that provides the knobs, buttons and display for the operation of a several different software programs for Software Defined Radio receivers and transceivers. Developed specifically for Software Defined Radio users who prefer the tactile operational comfort of a 'traditional' knobs and buttons radio while using the most up-to-date SDR technology. The TM-2 allows the manual manipulation of an SDR or rig control program without the need to touch a mouse or watch a computer monitor. This is especially helpful when a limited screen area is in use by other programs for logging, digital and contest operations. The ELAD TM-2 controller (formerly known as the WoodBoxRadio Tmate 2) is connected by USB to the computer that is running the SDR or rig control software. Depending on the software it offers controls that are typical of a traditional radio front panel as well as many extra controls with programming menus. The selectable color backlit Liquid Crystal Display shows the current frequency, the signal level, the current mode and much more. Six push buttons are available for often used functions, such as mode selection, step width, receiver mute etc. Equipped with heavy, metal knobs, one large rotary encoder serves as the "VFO" frequency control, while two smaller metal knobs can be assigned for AF Gain, RF Gain or Filter Width control, or to most other functions, as desired. Each of the rotary encoders is also a push button, which may be used to toggle the knob to many other assignable functions. Since it is so important, it bears repeating: one of the biggest benefits of the TM-2 is that instant and simultaneous control and display of frequency, mode and other conditions of the SDR receiver or transceiver program is possible, all while a logging, digital mode or contesting program is active in the foreground on the computer monitor. Connect the TM-2 to the computer running the SDR program or rig control using the included USB A to USB B cable. This controller uses the standardized HID protocol for USB devices, so it does not require special drivers on recent operating systems. The TM-2 case is metal, giving it a solid touch and feel with a convenient 45-degree angled panel. Power is supplied over the USB connection, so a separate power supply is not required. The TM-2 dimensions are WHD is 5.630 x 3.071 x 5.315 in. (143 x 78 x 135mm) and it weighs 1.72 lbs. (780g). NOTE: The operation of this device can require the installation of additional software and drivers, which are not included in the shipment, and which may require an additional purchase. The appropriate free software (e.g. Tmate2CatConsole) appears at the manufacturer's website. Supported Programs and Devices for the Elad TM-2 The TM-2 can be used directly with these programs [*] without additional software: • FDM-SW1 [*] • FDM-SW2 [*] • Studio1 [*] • SDR-Radio Console V2 [*] • N4PY Software [*] and more... For operation of the TM-2, these programs (**) require additional software, not included: • PowerSDR (FlexRadio, Beta status, requires Tmate2CatControl Software) [**] • Perseus (Microtelecom, Alpha status, requires Tmate2CatControl Software) [**] • HPSDR PowerSDR (Apache Labs ANAN-xx Transceiver, Beta Status, requires Tmate2CatConsole Software) [**] Required Downloads [**] a) Tmate2CatControl available from eladit.com download, free of charge, and b) Virtual Serial Port Emulator for 64 Bit operating systems, which is purchased and downloaded online from Eterlogic, a trusted Norwegian company.
( 2 )
$289.99
ELAD ASA16 Amplified Antenna Splitters
ELAD ASA16 Amplified Antenna Splitters are designed to distribute the signal from one antenna to up to six different receivers simultaneously. These six outputs are isolated to prevent interference from mismatches, but they do not provide any amplification. A switchable attenuator reduces the input signal by 15dB. A notable feature is the PTT input. When engaged, all receiver ports are isolated by more than 60dB (at 12MHz) from the input. This reliably protects even the most sensitive inputs. The integration into a ham radio station is made easy due to the same switching polarity of most transceivers, when keyed, the PTT output switches to ground. All coaxial connectors on the ASA16 are BNC female, and all inputs and outputs are designed for a 50-Ohm impedance. Three LEDs on the front show the current state of the ASA16: On/Off, Attenuator and PTT state. The ASA16 requires a 12VDC 300mA power supply (not included). The PTT connector is a stereo 1/8in. (3.5mm) male plug. The enclosure is made from brushed aluminum, with solid rubber padding. Upgrade your RX antenna distribution system with the ELAD ASA16 Amplified Antenna Splitter, ensuring reliable and high-quality signal reception across multiple receivers.
( 1 )
$305.99
ELAD ASA15 Amplified Antenna Splitters
ELAD ASA15 Amplified Antenna Splitters are designed to distribute the signal received from one antenna to up to five different receivers simultaneously. They utilize an internal divider and ultra-wideband low-noise amplifiers to ensure the antenna signal is effectively shared across all five outputs. Each of the five outputs can provide either 0dB (no gain) or 12dB gain, which helps compensate for long distribution cable run losses or boost weak signals. Additionally, a 15dB attenuator on the input can be switched on to prevent overload. Upgrade your RX antenna distribution system with the ELAD ASA15 Amplified Antenna Splitter, ensuring reliable and high-quality signal reception across multiple receivers.
( 1 )
$327.99
ELAD ASA62 Amplified Antenna Splitters
ELAD ASA62 Amplified Antenna Splitters are designed to distribute the signal from six antennas to two different receivers simultaneously. A powerful Amateur Radio or SWL station requires multiple antennas to optimally cover each frequency range. The ASA62 Amplified Antenna Splitters from ELAD (Italy) allows you to distribute up to six antennas to two receivers. Each input is buffered by a very low-noise amplifier (AD8099), ensuring that the signals do not interfere with each other. By doing so, the signal from one antenna can be sent to both receivers simultaneously. Switching is done via relays, not PIN diodes, to avoid unwanted signal distortion. Operation is straightforward with push buttons on the front panel, and LEDs built into the buttons clearly indicate their status. Alternatively, the ASA62 can be operated remotely, with free software available for download on the Microsoft Windows platform. The frequency range is 9kHz to 70MHz, all connectors are BNC female, and the impedance is 50 Ohms. A DC power supply cable is included. Note that the ASA62 is not suitable for transmitting.
Not Yet Reviewed
$309.99