Availability
HAMplus Smart Antenna Control Switching Devices, Control Consoles & Antenna Switches
Tailored to the Amateur Radio community, Hamplus makes innovative smart antenna control switching devices, control consoles & antenna switches that can read data...
Tailored to the Amateur Radio community, Hamplus makes innovative smart antenna control switching devices, control consoles & antenna switches that can read data from the radio and memorize antenna selections. Years of Amateur Radio experience shows in these components for high-performing DX and Contest stations. Hamplus products will improve the function and performance of your station—available in North America exclusively from DX Engineering.
Tailored to the Amateur Radio community, Hamplus makes innovative smart antenna control switching devices, control consoles & antenna switches that can read data from the radio and memorize antenna selections. Years of Amateur Radio experience shows in these components for high-performing DX and Contest stations. Hamplus products will improve the function and performance of your station—available in North America exclusively from DX Engineering.
Hamplus AS-603WL Automatic Remote HF and VHF Antenna Switches
Hamplus AS-603WL Automatic Remote HF and VHF Antenna Switches provide a new level of affordable convenience. This amazingly intelligent, three-transceiver interfaceable dual-relay smart control communicates wirelessly with and selects a six port remote antenna relay via the coaxial cable. The upgraded AS-603WL Smart Control Console with a black finish controls the AS-61WL weatherproof outdoor relay box with no control cable required. Select any one of three radios to connect or bypass the single amplifier I/O in the shack. Supporting one antenna connected to one radio at a time, manual or automatic selections of antenna and radio are confirmed with illuminated pushbuttons. Transceivers interfaced with optional cables provide frequency data for memorized automatic antenna selections. Interface cables are available for Elecraft, Icom, Kenwood and Yaesu transceivers which support frequency data for specific antenna selections by band segment. The AS-603AL also features an RS-232 serial port for PC controlled remote operation. The Hamplus AS-603WL Black system operates from 1.8 to 150 MHz and handles up to 3,000 watts PEP under 1.5:1 SWR. SO-239/UHF Female connectors on the back panel of the AS-603WL console include an In/Out pair to use one linear amplifier, wattmeter, or both, with all three radios! Click on HPY-AS-603WL-BK below to see more details! Finally, an intelligent remote antenna switch that knows what to do! Hamplus Automatic Remote Antenna Switch and Control Console Packages are ready for your multi-radio and multi-antenna station.
Not Yet Reviewed
$837.99
Hamplus Desktop Antenna Switches
Hamplus Desktop Antenna Switches offer fast and convenient selection of up to six antenna coaxial cables and three radio coaxial cables. All of these switches are relay controlled and handle up to 2 kW, so you can connect these switch radio ports to separate amplifier and radio sets, or wire in one amplifier for all three radios with the AS-603AL. The AS-603 is a manually controlled rotary/relay switch and the AS-603A and AS-603AL are automatic and manual illuminated indicator push button switches with independent band memory and band data interface capabilities for up to three different radios. These intelligent band decoder models are compatible with Elecraft, Kenwood, Icom and Yaesu transceivers. Click on the model of interest for additional information at the "More Details" links below.
( 17 )
$388.99
—
$524.99
Hamplus Antenna Control Switching Devices
Hamplus Antenna Control Switching Devices include automatic band data controlled remote antenna switching systems including full web remote capability without a PC. Hamplus automates HF + 50 MHz switching for 8 to 16 antennas and from 2 to 8 radios, including devices to connect multiple directional controllers to as many as 8 different antenna rotators. Band-data and frequency reading, multi-function control consoles include support for all major brand transceivers with radio specific control cables. Hamplus also offers manual multi-port to multi-radio antenna switches and a four-stack antenna switching system. Years of Amateur Radio and professional experience shows in these components for emerging and elite DXers as well as established multi-radio contest stations. Hamplus products will improve the function and performance of your station. Click on each part number for specific descriptions, specifications, more information and links to compatible or required products.
( 11 )
$39.99
—
$3,617.99
Hamplus AS-81U HF-VHF-UHF Remote Antenna Switch
Hamplus AS-81U HF-VHF-UHF Remote Antenna Switch is a high-performance weather-resistant 8 x 1 RF relay unit for use outdoors, that provides selection of eight antennas to one radio. The AS-81U features: • Nine SO-239 (UHF Female) Connectors – downward facing • Weatherproof screw-on 9-pin connector for the control cable – downward facing • Stainless Steel cabinet with integral bracket for user mounting • Operation from DC up to 450MHz • Single RF output is grounded when the power is removed, or no antenna is selected • Low-side relay control (ground to select port) is supported by third party automation • Automatic/manual operation is supported with the Hamplus MBD-8G Smart Controller • Manual rotary switch operation is supported by the Hamplus RC-12 Manual Controller Hamplus AS-81U Specifications — - RF Power: 4000 Watts PEP HF maximum at 1.5:1 or less SWR - Frequency of operation: DC to 450MHz - Insertion loss: Equal or less than 0.2dB - Time delay to switch: Equal or less than 12ms (relay operation during - TX not allowed) - Power Requirement: 13.8 VDC +/– 20% at approx. 70mA (single port selected)
Not Yet Reviewed
$302.99
Hamplus AS-81U-N HF-VHF-UHF Remote Antenna Switch
Hamplus AS-81U-N HF-VHF-UHF Remote Antenna Switch is a high-performance weather-resistant 8 x 1 RF relay unit for use outdoors, that provides selection of eight antennas to one radio. The AS-81U-N features: • Nine Type-N Female Connectors – downward facing • Weatherproof screw-on 9-pin connector for the control cable – downward facing • Stainless Steel cabinet with integral bracket for user mounting • Operation from DC up to 450MHz • Single RF output is grounded when the power is removed, or no antenna is selected • Low-side relay control (ground to select port) is supported by third party automation • Automatic/manual operation is achieved with a Hamplus MBD-8G Smart Controller (not included) • Manual rotary switch operation is supported by the Hamplus RC-12 Manual Controller (not included) Hamplus AS-81U-N Specifications — - RF Power: 4000 Watts PEP HF maximum at 1.5:1 or less SWR - Frequency of operation: DC to 450MHz - Insertion loss: Equal or less than 0.2dB - Time delay to switch: Equal or less than 12ms (relay operation during - TX not allowed) - Power Requirement: 13.8 VDC +/– 20% at approx. 70mA (single port selected)
Not Yet Reviewed
$302.99
Clearance
Hamplus AS-603ALS Desktop Automatic Switch for Six Antennas and Three Radios
Hamplus AS-603ALS is a high-performance desktop automatic switch designed to connect up to six antennas to three transceivers, offering seamless integration for complex amateur radio setups. It features two independent internal relays—one for antenna selection and one for radio selection—allowing flexible and intelligent switching. Key Features: -- Manual and Automatic Operation: Illuminated pushbuttons allow manual selection of antennas and radios. Automatic switching is enabled via band/frequency data from compatible transceivers. --Transceiver Compatibility: Elecraft, Icom (CI-V), Kenwood, Yaesu, and FlexRadio transceivers using optional interface cables. --Amplifier Integration: Two rear-panel SO-239 RF connectors route the selected radio's output through a shared linear amplifier. Amplifier keying is managed via three RCA inputs and a single relay output. --Memory Function: Automatically recalls the last antenna used for each band or frequency when the transceiver changes bands. --Remote Control: RS-232 serial communication with PC and downloadable software. Specifications: - Dimensions (WHD): 13.00 × 3.15 × 5.91 in (330 × 80 × 150 mm) - Power Requirement: 13.8 V DC, 140 mA - Maximum Power Handling: Up to 3000 Watts SSB PEP (with antenna SWR < 1.5:1) - Frequency Range: 1.8 to 148 MHz - Insertion Loss: < 0.2 dB - RF Port Isolation: 72 dB @ 30 MHz; 58 dB @ 50 MHz
Not Yet Reviewed
$575.99
$489.59
—
$575.99
Hamplus AS-81S Antenna Switches
Hamplus AS-81S Antenna Switch is a high quality outdoor remote relay unit with eight antenna inputs and one common RF output. The AS-81S rectangular outdoor unit replaces the AS-81, the previous round enclosure model. It handles 4 kW PEP RF power on antennas with SWR under 1.7:1 across the RF spectrum from 0 to 60 MHz. The aluminum cabinet is painted white, especially developed for long term outdoor use. The coaxial connectors are the UHF type (SO-239). All unselected inputs are automatically connected to ground and all inputs are connected to ground when power is off. The Hamplus AS-81S Antenna Switch is normally operated with a Hamplus Smart Controller MBD-8F, sold separately. However, it may be controlled with any automated or manual switching system that provides grounding port selection. A 9-conductor control cable is required. This switch is supplied with a short 9 ft. cable terminated to the DB25M for testing operation with a Hamplus MBD-8E or MBD-8F Smart Controller. This cable may be extended for remote installation outside, at the tower or other antenna cable termination point. Hamplus AS-81S Antenna Switch Specifications: - Frequency of operation: 0 to 60MHz - Power allowed: 4,000 watts PEP SSB with S.W.R. equal or less than 1.7:1 - Insertion loss: Equal or less than 0.1dB - Port Selection: Sink to ground, low side switching (Hamplus MBD-8F typical) - Port Isolation: Equal or less than -58dB to 30MHz; less than -52db to 60MHz - Relay Delay: Equal or less than 50ms - Power Supply: 13.8 Vdc +/ - 20%; 70mA single port selected - Control Cable: 9 conductors, 24 AWG or larger
Not Yet Reviewed
$284.99
Hamplus Band Data Interface Cables
Hamplus Band Data Interface Cables provide band switching data from specific transceivers to their compatible Hamplus Smart Antenna Control Consoles and Smart Desktop Antenna Switches. The first letter of each cable part number indicates the transceiver brand: * E - Elecraft * F- FlexRadio * I - Icom * K - Kenwood * Y - Yaesu The cable part number numeral indicates the compatible Hamplus Smart Console types: * Series 6 cables with -6 and -61 in the part number are for AS-603 and AS-61 Series--6 Antenna 3 Radio Hamplus Controllers that have a 6-pin mini-DIN RADIO port. * Series 12 cables with -12 in the part number are for MBD-12, MBD-8G, MBD-62 Hamplus Controllers that have a rear panel DB9F RADIO port. These are used for combination systems including AS-602C, AS-601U and AS-801C. * Series 8 cables with -8 in the part number are for the discontinued MBD-8F and MBD-8E Hamplus Controllers that have DB25F RADIO port. * Cables with BCD in the part number have a special BCD band data to serial converter. These cables deliver a programed band frequency data string to the Hamplus device which it reads in the Icom CI-V protocol at 19200 baud. Many BCD cables also have radio port extension connectors that facilitate simultaneous connection to a PC or other peripherals.
( 7 )
$50.99
—
$76.99
Hamplus AS-601U Desktop Automatic Antenna Switch for 6 Antennas to 1 Radio
Hamplus AS-601U Desktop Automatic Antenna Switch can manually or automatically connect one of six antennas to one radio, covering all bands from LF through HF, VHF and UHF. No computer is required for automatic antenna switching with optional Hamplus -12 series interface cables for Icom, Kenwood Elecraft, FlexRadio or Yaesu radios. The interfaced AS-601U is an Automatic Band Memory Antenna Switch that may also be operated manually. The switch retains the last antenna selection for each band for an interfaced radios. Antenna selections are confirmed with illuminated push-button switches which may be custom labeled. High port isolation ensures that strong signals received by other antennas do not affect the selected antenna, enhancing receive signal-to-noise performance. Remote control can be accessed via an RS-232 PC connection, operated with Hamplus RC for Windows software from Hamplus.com.
Not Yet Reviewed
$405.99
Hamplus AS-602C Automatic Antenna Switch System Six Antennas for Two Radios
The Hamplus AS-602C Automatic Antenna Switch System supports six antennas and two radios, featuring the MBD-62 Smart Controller and the AS-602 Relay Switch that covers HF, VHF, and UHF frequencies. Designed for SO2R (Single Operator Two Radio) operation, this system allows both radios to connect simultaneously to independently selected antennas. Automatic switching is available via optional Series 12 interface cables, and remote control can be accessed through LAN or RS-232 ports. The system supports both automatic and manual operation for any radio, with illuminated push-button switches that can be custom labeled to confirm antenna selections. Interconnection between the controller and relay switch is simplified with preassembled CC-62 cable assemblies, available in lengths from 5 to 30 meters (16 to 98 ft.), sold separately.
Not Yet Reviewed
$1,088.99
Hamplus Four Stack II Systems
Hamplus Four Stack II Systems makes it possible to easily and quickly change selections of any in-phase combination of two, three, or four stacked HF beam antennas or an array of HF phased vertical antennas. Plus, Four Stack II Systems can be combined to control antenna selections on any of the array switches by any of the multiple system Control Consoles. This is possible with simple patch cable networking. Up to four operating positions can have access to four different stacked arrays. The Hamplus Four Stack II System provides unprecedented control of your multiple antenna arrays. The 4-Stack Control Console has five illuminated pushbuttons; ANT 1 through 4 select stacked antennas and ENTER aids in programming. Each antenna selection keys works as a one-touch ON, one-touch OFF method, so it is easy to control which of antennas you want to use at a certain time. Trying different combinations of antennas for the transmission and reception can be accomplished independently, quickly and easily. Arrays can be configured differently for receive and transmit without manually switching back and forth. The system is managed and supervised by a microcontroller that has internal software designed to meet the various system functions and easy operation. All control boxes can be interconnected so that any remote console can command any antenna array switch box. The Four Stack II switch box is rugged and capable, with a better design for mounting outdoors, near or under antenna arrays. No extra or special housings are needed. With the internally connected controller cable, the system is an easy, plug-and-play operation. The Four Stack II is available with either Type N female or UHF female (SO-239) connectors for your array. The Four Stack II is rated for 3,000 W maximum RF power and covers 1.8 to 30 MHz. Connection to 50 ohm, low SWR antennas with 50 ohm coaxial cable is required. All combinations of antennas are in-phase only. Achieve complete control of your antenna arrays with Hamplus Four Stack II Stack Systems from DX Engineering!
Not Yet Reviewed
$899.99
Clearance
Hamplus HR-100L Rotator Controller with PC Interface
The Hamplus HR-100L Rotator Controller was developed to offer an inexpensive solution for manual and PC control of all models of rotators that use a 24 volt DC motor and a position indicating potentiometer. It is specifically designed to connect to any existing Yaesu rotator and control cable. This compact desktop unit features a black front panel with four illuminated directional memory buttons, a red three-digit LCD display to indicate rotator azimuth, an azimuth selection encoder knob, two buttons for CW and CCW advance, a special +180° button for an easy Long Path selection, two LEDs to indicate the ends of rotation and one LED in the LCD to indicate overlap. The HR-100L also has an RS-232 Serial port for PC control with any third party software, such as rig control and logging software, which supports the Yaesu protocol for rotators. A rear panel switch selects either 120VAC or 240VAC input voltage and the Yaesu style 6-pin connector is ready for the control cable to any Yaesu or 24VDC rotator, including G-450DC, G-800DXA, G-1000DXA and G-2800DXA, as well as other brands that use a similar configuration. With dimensions (WHD) of 12.2 x 5.9 x 13.0 in (310 x 150 x 330mm), the Hamplus HR-100L Rotator Controller is simple to set up and amazingly easy to use with your rotator! DX Engineering Yaesu Rotator Cable Assemblies are directly compatible, premade in lengths of 10, 50, 75, 100, 125, 150, 200 and 250 ft.
Not Yet Reviewed
$483.99
$411.39
—
$483.99
Hamplus SW-02 Serial Port Splitter Switch
Hamplus offers freeware serial device dataflow splitting software utility with their SW-02 Serial port splitter switch. The unit has two RS-232 COM DB9F, one for the radio, one for the PC and one cable with a DB9M for connection to an MBD-8 Smart Controller. The small toggle switch on unit allows the selection of either radio or PC to interface with the MBD-8 Smart Controller.
Not Yet Reviewed
$79.99