Heil Sound | DX Engineering

Heil Ham Radio BM-17 Lightweight Headsets

The redesigned Heil Ham Radio BM-17 Lightweight Headsets are excellent for portable operations, with several updates including the new swivel-mounted boom that allows operators the flexibility of positioning the microphone on the left or right side. These headsets are available as either the BM-17S single-side or BM-17D dual-side model and are now only available in standard black, with "Heil Ham Radio" brand. To accommodate different transceivers, both models of the BM-17 are available with either a Dynamic element or an iC Electret element. The speakers used in the BM-17 headset are extra sensitive, so they do not require much AF drive from the transceiver. Their frequency response is 200 Hz – 5 kHz with exceptionally low distortion and each features replaceable ear pads made of acoustic foam. Heil Headsets feature two different mic elements, so they must be paired with the appropriate Heil AD-1 series transceiver mic adapter cable (not included). • The BM-17 Dynamic headset uses the dynamic element designed specifically for communications use, with an operating frequency response of 120 Hz – 10 kHz. This 500 ohm dynamic element will work on most amateur radio rigs requiring a Low-Z input impedance (usually between 150 ohms and 4k ohms). Legacy transmitters and transceivers that require a high impedance microphone input of 10k to 30k ohms can be accommodated with a Heil XT-1 impedance matching transformer. • The BM-17 iC Electret element works with virtually all Icom rigs and were specifically made to provide the best audio solution for the low microphone gain audio characteristics of most "pre-PRO" and basic Icom rigs. The iC element has an operating frequency response of 35Hz – 12kHz. The -3 dB points are fixed at 100 Hz and 12 kHz with the sensitivity of -57 at 600 ohms output centered at 1 kHz. The iC element requires + 5 Volts DC bias power to operate. The microphone audio for the BM-17 series terminates into a red 1/8 in. mono plug while the headphone terminates into a black 1/8 in. stereo plug (1/8 to 1/4 in. adapter included). The use of the AD-1 series mic adapters allows simple interface with popular transceiver inputs. The AD-1 series adapters are 6 to 8 in. long and has a 1/8" female input jack for the headset microphone while the 1/4" female that exits the adapter is the PTT (push to talk) line for a Heil foot switch or hand switch. The 1/8" or 1/4" stereo plug goes into the headphone jack on the transceiver front panel. The stainless steel band inside the padded top can be reshaped for a comfortable custom fit. NOTICE: Some state laws prohibit the use of headsets while operating a vehicle. Please check with your local regulations and restrictions prior to usage of this product while operating.

4.0 out of 5 stars ( 6 )

$165.00

—

$169.00

Heil Sound PRO 7 Headsets

Heil Sound PRO 7 Headsets are aviation-style headsets designed for exceptional comfort and performance. A true dual channel, stereo headset, the PRO 7 Series features an audio balance control which allows the user to adjust the level of the left earphone to match the right. A unique phase-reversal switch greatly helps the listener "dig out" weak signals. These headsets will help you work the DX! The flexible gooseneck mic boom on PRO 7s may be rotated for use on either the right or left ear. Two versions are available, depending on whether you require an electret or dynamic microphone element. Heil PRO 7 headsets are available in black, red, and blue. Purchase an AD-1 series Headset Adapter Cable (sold separately) for a simple connection to the transceiver mic input. The adapter is 6 in. long and has a 1/8 in. female input jack for the headset boom microphone—and a 1/4 in. female for the PTT (push to talk) line for the Heil foot or hand switch. The headset stereo plug goes into the headphone jack on the transceiver front panel. Check out these cutting-edge details: * The most comfortable-to-wear headset…ever * Adjustable stainless steel headband * Specially designed foam-gel ear pads provide 26 dB PNR outside noise reduction - an space set of ear pads are included * Washable cotton cloth 'booties' cover the ear pads * 40 mil high-response speakers produce extremely clear voice articulation * Acoustically dampened speaker enclosure * Negative 3 dB points set at 80 Hz to 12 kHz * Speaker balance control adjusts level between the two speakers * Full Stereo, two channel reception, perfect for Dual-Watch receiving systems * Military spec cable system using 6-pin mini XLR and fiber reinforced cable * Connects to standard Heil headphone adapters * Two types of military grade cables are included: straight and coiled * Detachable cables with comfortable 'Soft Touch' in-line 2 in. diameter PTT * 1 in. thick, 6-section foam headband for maximum comfort * Interchangeable HC 7 dynamic OR Heil iC condenser mic element * Heil's EXCLUSIVE Speaker Phase reversal helps to 'dig out' the weak signals Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Everyone knows about Heil Sound quality. Heil Sound's PRO 7s continue the innovation for which Heil Sound is also world renowned. Order your own Heil Sound PRO 7 Headsets from DX Engineering and enjoy the comfort, quality and features you deserve!

4.78 out of 5 stars ( 104 )

$299.00

—

$349.00

Heil Sound Hand Switches

Heil Sound HS-2 Hand Switches are ergonomically designed pistol-grip hand switches combining functionality with ease of use. A typical application would be to key a transceiver when using a microphone without PTT, or in a noisy environment where VOX operation is useless or erratic. They feature a pistol grip, so you can operate the switch as a trigger, rather than as a tiring thumb-operated push button. Heil Sound HS-2 pistol grip hand switches terminate in a 1/4 in. phone plug for connection to the 1/4 in. female pigtail of the Heil Microphone Adapter Cables and Headset Adapter Cables, thus providing push-to-talk (PTT) control of almost any transceiver and microphone combination. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. When you want total PTT control, Heil Sound HS-2 Hand Switches from DX Engineering are a great way to go!

4.89 out of 5 stars ( 80 )

$45.00

Heil Sound Pro Set Elite Headsets

Heil Sound Pro Set Elite Headsets are the ultimate boom-mic headsets designed for Amateur Radio operators using the Heil HC 6 wide-response microphone element. The microphone technology of the Heil HC 6 is designed for full-range commercial AM or FM network broadcasts, or it may be adjusted for bright, articulate audio to cut through Amateur Radio noise and signal pileups. Pro Set Elite headsets contain specially-designed high-performance dynamic elements that compliment advanced audio adjustability of modern Amateur Radio transceivers. The -3 dB points are fixed at 80 Hz and 12.5 kHz. Pro Set Elite Headsets offer round, over-the-ear cushioned pads with highly efficient speakers mounted in acoustically-tuned chambers. They seal the ears into their chamber and facilitate a high rejection of outside noise. An exclusive Heil phase-reversal switch allows the user to move the signal acoustically, which creates a spatial widening of the sound field. That makes it easier to 'see' a signal inside of a pileup while helping to remove listener fatigue during prolonged use. The headphone's speakers fold up for easy transportation and storage. Field-replaceable cushioned ear pads also come with cotton covers that can be easily removed for washing. Their 6 ft. coiled cable terminates in a 1/8 in. mono plug for the microphone and a stereo 1/8 in. plug for the headphone speaker connection. A 1/8 in. to 1/4 in. headphone jack adapter is also supplied. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Pro Set Elite Headsets work with all Heil AD-1 adapter cables, which mate with just about every type of amateur radio transceiver. Purchase an AD-1 series Headset Adapter Cable (sold separately) for a simple connection to the transceiver mic input. The adapter is 6 in. long and has a 1/8 in. female input jack for the headset boom microphone and a 1/4 in. female for the PTT (push to talk) line for the Heil foot or hand switch. The headset stereo plug goes into the headphone jack on the transceiver front panel. You deserve the quality and versatility of superior headsets. Heil Sound Pro Set Elite Headsets from DX Engineering will help you log the rare ones!

4.77 out of 5 stars ( 22 )

$229.00

Heil Sound Headset Adapter Cables

Heil Sound Headset Adapter Cables are used to interface your Heil headset to your favorite transceiver. Heil AD-1 series headset radio cables are required for Heil boom microphone headset models including PROSET Elite, PROSET, the original and reintroduced PRO-MICRO series, the lightweight, yellow BM-17 series and BM-10 series headsets, and the legacy PROSET PLUS. These cables support all of the Heil Sound Headsets that feature a 3.5 mm (1/8 in. miniature phone) mono connector for the microphone audio. Each has a female 1/4 in. mono dongle connector on a short wire for PTT keying foot switch or hand switch connection. NOTE: These Heil Headset Adapter Cable assemblies handle mic audio and keying, NOT the headphone audio. The stereo male plug on your headset cable connects directly to your transceiver headphone jack, not to the AD-1 series adapter cable. Headsets typically include stereo 1/8 in. (3.5mm) to 1/4 in. (6.35mm) headphone audio adapters. All Heil Headset Adapter Cables use commercial-grade microphone connectors with dual-exit cable clamps that are much heavier than the normal CB-type connectors that the industry had been forced to use for decades. If you have several brands of transceivers, individual adapter cables may be connected to each radio, so you may quickly and easily move your Heil boom microphone headset from one transceiver to another, without having to remove any connectors from the transceivers. All Heil audio cables are wired through to support VOX operation. Heil Sound Headset Adapter Cables are available in 4-pin and 8-pin round connectors, and 6-pin and 8-pin modular-style connectors. HSTA series Headset Adapter Cables were specially designed for the legacy Heil TRAVELER Headsets that were discontinued and are no longer available. Some of the presently available adapter cables feature an extra wire and connector to go to the transceiver external speaker connector, for those radios where receive audio is not provided on the microphone connector. On transceivers that support them, the special UP-DOWN buttons on the TRAVELER Headset cables are connected with these cables.

4.86 out of 5 stars ( 213 )

$19.00

—

$30.00

Heil Sound Professional Headphones

Heil Sound Pro Set 3 Professional Headphones set a new standard for exceptional articulation and clarity, with beautiful sonic accuracy in a closed back, lightweight headset. Incredibly versatile, these excellent stereo headphones are perfect for virtually any audio monitoring - in recording and broadcast studios, amateur radio stations, for short wave listening, podcasting, and for private listening of personal audio devices, stereo systems, and computer sound outputs. The HEIL Pro Set 3 features high quality 40 mm neodymium magnets and voice coils, lightweight, ergonomically designed cushioned headband adjustable for maximum comfort while significantly reducing outside noise. Supplied with two detachable cables, a 70 in. (1.8 M) flexible straight cable and a 39 in. (3 M) coil cord - all twist lock terminating in a 1/8" (3.5 mm) with a professional gold plated screw-on 1/4" (6.3mm) adapter. Heil Sound Pro Set 3 Professional Headphones feature: -- 10 Hz - 22 kHz extended frequency response for exceptional clear, balanced sound reproduction -- Convenient folding construction for compact transport and storage -- Ergonomic design with soft, adjustable cushioned headband. -- Serious acoustical outside noise reduction -- Mid-size design with internal steel headband -- Soft padded, replaceable ear cushions -- Three twist lock detachable cables -- Gold-plated stereo and screw-on 1/4" adapter Order the new standard in headphones from DX Engineering today! Get the Heil Sound Pro Set 3 Professional Headphones here!

4.73 out of 5 stars ( 49 )

$159.00

Heil Sound Microphones

Heil Sound Microphones cover the audio spectrum with models for virtually every Professional and Amateur sound application. Specific Heil microphones are best selected and matched to their intended uses for instruments, drums, and voice. From live music to studio recording, broadcasting, and all types of Amateur Radio operating, Heil microphones have set new standards for audio excellence, providing the clarity and wide-range response that audio and radio professionals require and Amateurs demand. Experience counts in design and implementation, and every unique Heil Microphone brings a significant contribution to the art of audio recording, reproduction, transmission and the Science of Sound. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. "Buy from a name you can trust." That quote is thrown around a lot in advertising. But when it comes to microphone audio, Heil Sound Microphones are, indeed, a name you can trust!

4.87 out of 5 stars ( 71 )

$89.00

—

$379.00

Heil Sound Microphone Booms

Heil Sound Microphone Booms allow the perfect placement of your microphone. Different Microphone Boom models and Boom Mount Hardware allow you to create a microphone positioning system that works for almost any situation. Check out what the profession studios have been using for years: Heil Sound Microphone Booms.

4.68 out of 5 stars ( 37 )

$69.00

—

$115.00

Heil Sound Pro Set Elite iC Headsets

Heil Sound Pro Set Elite iC Headsets are excellent boom-mic headsets are designed for Amateur Radio operators using a transceiver that can benefit from the use of a high energy electret element . The new technology of the Heil IC element is designed for full-range commercial AM or FM network broadcasts or can be adjusted for bright, articulate audio to cut through Amateur Radio noise and signal pileups. Pro Set Elite iC headsets contain the special high performance electret condenser, which was designed for the low-level mic inputs used in many ICOM Amateur Radio transceivers. Their -3 dB points are fixed at 80 Hz and 12.5 kHz. The iC electret element requires +5V DC phantom power, which all ICOM rigs provide. Pro Set Elite iC headsets offer dual side, highly efficient speakers mounted in acoustically tuned chambers, the isolation of which produce a high rejection of outside noise. An exclusive Heil phase reversal switch allows the user to move the signal acoustically, which creates a spatial widening of the sound field. That makes it easier to 'see' a signal inside of a pileup, while removing listener fatigue during prolonged use. Pro Set Elite speakers fold up for easy transportation and storage. Field-replaceable cushioned ear pads also come with cotton covers that can be easily removed for washing. Their 6 ft. coiled cable terminates in a 1/8 in. mono plug for the microphone and a stereo 1/8 in. plug for the headphone speaker connection. A 1/8 in. to 1/4 in. headphone jack adapter is also supplied. Purchase an AD-1 series Headset Adapter Cable (sold separately) for a simple connection to the transceiver mic input. The adapter is 6 in. long and has a 1/8 in. female input jack for the headset boom microphone and a 1/4 in. female for the PTT (push to talk) line for the Heil foot or hand switch. The headset stereo plug goes into the headphone jack on the transceiver front panel. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Give your ICOM transceiver the quality headset it deserves. Order Heil Sound Pro Set Elite iC Headsets from DX Engineering to improve your TX and RX audio!

4.55 out of 5 stars ( 22 )

$229.00

Heil Sound Microphone Adapter Cables

Superior-quality Heil Sound Microphone Adapter Cables, CC-1 series, are used to connect your Heil microphone to your favorite transceiver. There are two types of cables available for the two types of Heil microphones, 4-pin XLR and 3-pin XLR. Both adapter cable types feature the PTT mono 1/4 inch (6.35mm) jack at the transceiver mic connector for a foot switch or hand switch. Heil Sound Microphone Adapter Cables are available with round 8-pin, round 4-pin and 8-pin modular-style connectors for most transceivers. Most Heil Microphone adapter cables feature the special 4-pin XLR connector to serve the Heil microphones that have a built-in PTT switch. They work with the Classic, Goldline, GM, HM-12 Genesis, Handi-Mic, HM-10XD and HM-10 microphones. Use of an external foot or hand switch is optional. Conversely, the cables with the letters "XLR" in the part number have the audio industry standard 3-pin XLR microphone connector. These cables are required for the "PR" PRO Series microphones such as the PR-20, PR-28, PR-40, PR-781 and several others. Since these mics have no PTT switch, they require the use of an outboard hand or foot switch connected to the adapter cable PTT jack. Features and benefits of Heil Microphone Adapter Cables compared to others: * 100 percent silver-braid shield... keeps noise OUT * PTT control lines are OUTSIDE the shield... eliminates stray coupling * Made using commercial-audio grade 'Heilwire'... strong and supple * 18-gauge wire; not 22 or 24 like others... lower cable resistance * Commercial-grade microphone connectors (patent pending)... lasting durability * Heil dual-exit cable clamps are heavier than normal connectors... robust reliability * Outstanding engineering... lowest-noise transmit audio The XLR connector's quick-disconnect feature lets you easily move your Heil microphone from transceiver cable to transceiver cable, at the microphone end, without having to rewire a boom or remove any connectors from the transceivers. Additionally, all Heil audio cables are wired through to support VOX operation. Don't attach a high-quality microphone to cheap cable! Order your Heil Sound Microphone Adapter Cables from DX Engineering and transmit the best audio possible!

4.87 out of 5 stars ( 149 )

$30.00

—

$49.00

Heil Sound's iCM Microphones

Heil iCM microphones are high performance mics specially designed for owners of earlier ICOM transceivers that exhibit low gain in the microphone amplifier stage. Two models are available: the original Silver version and the new Black and Gold version. Not cheap electret microphones, the iCMs utilize a high-quality condenser element with a broad frequency response (35 Hz to 12 kHz) and high output that is crafted for compatibility with the ICOM transceivers. The iCM microphones were designed in close collaboration with ICOM's engineering team and are housed in a beautiful platinum-finish enclosure, making them ideal for hand-held use or for mounting on a boom or desk stand. The iCMs are shipped with microphone clips compatible with Heil Sound base stands and booms. The iCMs are fitted with an 8 ft. length of Heilwire cable terminated in an 8-pin round mic connector that's wired for the ICOM transceivers. A 1/4 in. inline phone jack accepts PTT input from a foot switch or hand switch. A "light touch" PTT switch is mounted on the body of the iCMs. Make your ICOM rig "sing" like never before with Heil iCM microphones.

4.82 out of 5 stars ( 38 )

$149.00

Heil Sound PRAS-EQ Parametric Receive Audio System Equalizer

The Heil Sound PRAS-EQ Parametric Receive Audio System Equalizer is a state-of-the-art audio system that enhances the sound of Amateur Radio, shortwave, commercial, and CB receivers. The PRAS-EQ allows radio operators to modify, shape and improve the audio output of their receivers using three separate equalization controls. Midrange frequencies are the most critical for achieving clear voice articulation in receive audio, especially for those with hearing deficiencies. The PRAS-EQ allows operators to have unique control over these important frequencies. First, operators can adjust the parametric midrange filter from 400 Hz through 4 kHz, with the recommended sweet spot being at 2.5 kHz. In addition, operators can control the presence of these midrange frequencies plus or minus 15 dB. Combined with a low-frequency filter down to 160 Hz, and a high-frequency filter up to 6 kHz, the Parametric Receive System provides operators unparalleled control and quality of their receive audio. The PRAS-EQ has three audio Inputs; a standard XLR, a 1/8 in. (3.5mm), and a 1/4 in. mono 8 ohm input that can accept the 8 ohm external speaker output of any radio. Three audio Outputs on the PRAS-EQ are one balanced XLR and one 1/4 in. (6.35mm) outputs on the rear panel and one 1/8 in. (3.5mm) output on the front panel for recording audio. The PRAS also has two built-in headphone amplifiers with separate level controls and dual 1/8 in. headphone outputs. The PRAS Parametric Receive Audio System is intended to be used with the specially designed Heil HPS-5 Powered Speaker, now sold separately. The line level output of the PRAS-EQ unit may be used with any powered speaker. Order the Heil Sound PRAS-EQ Parametric Receive Audio System Equalizer from DX Engineering and restore clarity to your radio listening!

4.75 out of 5 stars ( 24 )

$242.10

—

$269.00

Heil Sound HPS-5 Powered Speaker

The Heil Sound HPS-5 Powered Speaker is a great sounding stand-alone speaker with a built-in 24-watt, two-way, ultra-low distortion amplifier. It drives a specially designed 5 inch low-frequency speaker with a 3 inch magnet assembly mounted in a resonant sealed enclosure. A passive extended crossover drives a 2 inch high-frequency tweeter. A mono 1/8 in. miniature (3.5mm) input jack is for connection to any transceiver external speaker or line level output jack. Since this is a mono powered speaker, any stereo audio device may be connected with the appropriate stereo to mono adapter. The HPS-5 is a companion piece for use with the Heil Sound PRAS-EQ Parametric Receive Audio System Equalizer, which together provide superb audio without distortion. The balanced audio XLR-to-XLR cable to connect the PRAS-EQ to the HPS-5 is supplied with this speaker. This powered speaker has a rear panel 2 amp fuse and a 2.1mm input for the included 12 Vdc 2 amp power supply. The dimensions of the Heil Sound HPS-5 are 7 x 9 x 6 in. (WHD).

4.5 out of 5 stars ( 14 )

$199.00

Heil Sound CB-1-PTT Microphone Base Stands

Heil Sound's CB-1-PTT Microphone Base Stands are perfect foundations for Heritage and other Heil sound microphones. They include a soft-touch push to talk switch on the base that may be utilized as a "cough" switch in broadcast and other live sound applications. The stands are heavy-weighted and have a polished chrome insert for great looks. A 24 in. jumper cable is included for connection to the push to talk control jack. The Heil Sound CB-1-PTT Microphone Base Stands use standard 5/8-27 in. threading, as do all of the Heil Sound booms and stands, for compliance with industry standards.

5.0 out of 5 stars ( 5 )

$79.00

Heil Sound Pro Set Media Pro Headsets

Heil Sound Pro Set Media Pro Headsets are award-winning communications boom-microphone headphones designed for use with your personal computer, laptop or notebook. These high-quality headsets make a fantastic gift for any computer user! Based on Heil Sound's popular Pro Set communications headsets, Pro Set Media Pro Headsets utilize a high-level condenser microphone element designed specifically for the requirements of computer sound card inputs. The result is beautiful, broadcast-quality audio, with plug-and-play functionality. The audio reproduction of these 4 in. over-the-ear headphones need to be experienced to be believed, with full spectrum clarity for every computer listening application. Pro Set Media Pro earphones are acoustically tuned, and they incorporate Heil Sound's exclusive phase reversal feature that creates a spatial widening effect that often makes incoming audio easier to understand. The Heil Sound Pro Set Media Pro is terminated with two industry-standard stereo 1/8 in. male plugs: the Red plug connects to the "Microphone" input jack on your computer and the Black plug connects to the computer "Headphone" or "Speaker" jack. Media Pro headsets come with removable cotton ear pad covers that can be washed. Their comfortable vinyl ear pads can also be removed, should they ever need to be replaced. A foam wind screen is fitted over the boom microphone that may be easily removed and replaced. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Go online with the best computer communications audio solution from Heil Sound. Get Heil Pro Set Media Pro Headsets from DX Engineering today.

4.6 out of 5 stars ( 5 )

$119.00

Heil Sound HTH Series Handie-Talkie Headsets

Now you can have Heil Sound quality for your HT! Heil Sound HTH Series Handi-Talkie Headsets are single-sided or double-sided lightweight headsets with adjustable boom mics, designed for use with many popular handheld transceivers. These headsets provide hands-free and discreet two-way communication while maintaining the comfort necessary for extended use in moderate noise environments. The single-side models feature a left or right ear adaptable earpiece and both single and double include an in-line Push-to-Talk switch. HTH and HTHD headset details: * Microphone Element: Electret * Frequency Response: 100 Hz to 10 kHz * Polar Pattern: Omni * Impedance: 2.2 k ohm * Weight: 2.7 oz. * Required Adapter: None** HTH Series headsets are available with three pin-out configurations- ICOM, Yaesu, and Kenwood/Baofeng. HTH-I and HTHD-I: Works with 2-pin Icom HTs and IC-705*** HTH-Y and HTHD-Y: Works with single pin TRRS Yaesu/Vertex HTs (not FT-25, FT-65 and not FT-4XR)** HTH-K and HTHD-K: Works with 2-pin Kenwood/Baofeng HTs, no adapter cable needed **For the weather-resistant Yaesu/Vertex models, such as the VX6R and VX7R, use the HTH-Y or HTHD-Y headset and a Heil HTH-ADY adapter cable. Works with Yaesu CT-131 for VX8DR. ***For HTH-I and HTHD-I used with ICOM HTs having 2-pin plugs, no adapter cable is needed. HTHD-I is compatible with the Icom IC-705, in its very tight fitting plug location; use caution and care when unplugging. Hams around the world have used Heil products on their HF base transceivers for decades. Now you may add Heil technology to your portable radio. Order Heil Sound HTH Series Handi-Talkie Headsets from DX Engineering for your HTs!

4.52 out of 5 stars ( 61 )

$45.00

—

$49.00

Heil Sound Microphone Mounts

Heil Sound Microphone Mounts include Shock Mounts and Replacement Mic Clips. Various mounts are available for different microphone models and applications, including a replacement for your old microphone. Each Microphone Mount has the industry standard 5/8-27 threading to attach to popular microphone stands and booms.

4.65 out of 5 stars ( 23 )

$12.00

—

$99.00

Heil Sound Headset Gear Bags

Heil Sound Headset Gear Bags are the perfect accessories for your headphones and headsets. These leatherette travel bags protect your equipment when you're traveling or storing it. Heil bags offer quality construction with a zipper closure, sturdy handles, a mesh storage pouch, and a Velcro® interior securing strap to keep your headgear in place. Gear bags are available to fit several styles of headsets and also have the Heil Sound logo embossed on the outside. When they're not on your head, stow your headphones in Heil Sound headset gear bags from DX Engineering!

5.0 out of 5 stars ( 9 )

$29.00

Heil Sound PRO74-DYNELE Contest/DX Elements

These Heil Sound PRO74-DYNELE Contest/DX Elements are user-replaceable and interchangeable dynamic microphone elements for the popular Pro 7 Headset. These elements make customizing your headset for Radiosport a very easy task. Heil's PRO74-DYNELE is a redesign of the popular HC-4 element that has been developed for serious Contest/DX operators. It rolls off the low end below 600 Hz with a 10 dB rise at 2,500 to 3,000 Hz. This audio contour creates a very clear and articulate signal to break through those pileups. Element details: * Plug-in Pro 7 replacement element * Generating Element: Dynamic * Frequency Response: 500 Hz to 7 kHz * Polar Pattern: Cardioid * Uses: Contests, DX Contest and DX operators know how vital a clear transmit signal can be when cutting through QRM and QRN. Convert your Pro7 dynamic headset with one of these Heil Sound PRO74-DYNELE Contest/DX Elements from DX Engineering and make your station heard!

4.29 out of 5 stars ( 7 )

$79.00

Heil Sound Replacement Parts

Heil Sound Replacement Parts are available here to help repair or restore your Heil Sound product and make it like new again. Or you may choose to build a custom assembly. Many of these parts may be used for your own microphone or headset project. Choose from cable mount XLR and Foster microphone connectors, ear pads, large and small windscreens, headset cords, mic switches, shock mount bands and other parts available for current and legacy models. However, please note that not all parts for all models are available, so if you don't see it here, chances are, it cannot be ordered. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.

4.64 out of 5 stars ( 99 )

$5.00

—

$79.00

Heil Sound Pro Audio Microphone Cables

Heil Sound Pro Audio Microphone Cables are ready to connect your stage, studio or broadcast microphone to your equipment. Top quality shielded Heil Wire is used to make these standard balanced audio microphone cable assemblies with 3-pin XLR connectors, male on one end and female on the other. Perfect for PR Series Heil or other professional Microphones.

Not Yet Reviewed

$40.00

Heil Sound Microphone Boom Mount Hardware

Heil Microphone Boom Mount Hardware mounts a microphone boom to your table, desk, console or wall, on a horizontal or vertical surface. Powder coated black for longevity and with several great boom mounts to choose from, there is a perfect microphone boom mount for your application. Get your Microphone Boom Mount Hardware here!

4.89 out of 5 stars ( 18 )

$19.00

—

$49.00

Heil Sound BM-17 Replacement Earpads

Heil Sound BM-17 Replacement Earpads are designed to bring new life to your Heil Sound BM-17 headsets. These Earpads work with all models of the BM-17 headsets. Simply remove the old ear pad and put the new one in it's place and you're ready to go. NOTE: This is for a single replacement earpad. If you have a Dual Sided BM-17, please order quantity 2 of this item.

Not Yet Reviewed

$10.00

Heil Sound Heil Wire Microphone Cable

Heil Sound Heilwire Microphone Cable is a specially-designed cable ideal for connecting microphones, foot switches, keyer paddles, and other audio, data or control devices. Heilwire features two 18-gauge wires inside a 100% coverage silver-plated braid shield, plus two 18-gauge wires external to the braid, for PTT or other control purposes. This design reduces capacitive coupling between the control lines and the sensitive AC audio signals residing inside the shield, resulting in significant reduction of the possibility of hum pickup, PTT pulses or RFI. Heilwire has an outer jacket made with extra flexible PVC and has a specified outer diameter of 1/4 in. to fit perfectly inside Heil Sound connectors. Heilwire Microphone Cable is great for many different types of audio and switching connectors and applications. For making connections to microphones and other devices, Heil Sound's exclusive Heilwire is the best choice. Get some today from DX Engineering.

4.86 out of 5 stars ( 7 )

$20.00

—

$70.00