Availability
ICOM Transceivers and Receivers
Manufacturer Rebate
ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver
ICOM IC-9700 VHF/UHF/1.2 GHz All-Mode Direct Sampling Transceiver features advanced technology. Built with the VHF/UHF weak signal operator in mind, the IC-9700 has an RF direct sampling receiver for the 2m and 70cm bands, and a single down conversion IF from 311 – 371MHz for the 23cm band. This combination design provides a quiet receiver using Icom's DSP technology. This is an excellent all-mode transceiver with which to cover all operating facets of the 2 meter, 70 cm and 23 cm bands! Features for the ultra-advanced Icom IC-9700 include: * Direct-Sampling SDR design * RF Output of 100 Watts on 2m (144-148 MHz), 75 Watts on 70cm (430-450 MHz) and 10 Watts on 23 cm (1240-1300 MHz) * All modes including FM, SSB, AM, CW, RTTY, Digital, D-Star Digital Voice and Digital Data * Digital Data (DD) mode provides 128 kbps data communication * D-STAR Terminal and Access Point mode (RS-MS3A/W) * Dual D-STAR receive (decodes two voice streams simultaneously) * Main and Sub RX * Full Duplex operation/ Dual Watch (no V/V or U/U Capability) * Smooth satellite operations with normal/reverse tracking and 99 satellite channels * Supports 2 wave simultaneous reception (different bands/same or different mode) * High definition Real-Time 4.3 inch TFT display * Touchscreen interface (LCD touch-screen control) * Main or Sub-Band Scope (Center/Fix mode +/-500kHz Center Mode) * Audio Scope * CW full break-in * 0.5ppm frequency stability * Voice Recording/playback function (SD Memory Card) * Ethernet Port - Internal Server for Internet remote control with optional RS-BA1 software * USB audio and control connection * DR Memories: 2,500 * Antenna connectors: 2m SO-239, 70cm Type N, 1.2 GHz Type N More information at the More Details link below. Explore new horizons and space communications with the ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver.
( 127 )
$2,099.95
Manufacturer Rebate
ICOM IC-7760 HF/50MHz All Mode Base Transceivers
ICOM IC-7760 HF/50MHz All Mode Base Transceivers feature an ALL NEW innovative shack style consisting of a remote control head and separate RF deck, connected with a commercially available control (LAN) cable. This concept increases the flexibility of your station installation, making more space available on the desktop by placing the RF deck in an area closer to the antenna feed point. In addition to the direct connect feature, control head to RF deck, allows you to utilize your home network to make any tabletop your shack, and a PC is not required!
( 10 )
$6,999.95
Manufacturer Rebate
ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers
ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers build upon its popular predecessor (ID-52A) and brings with it updated features that will delight amateur enthusiasts both at home and in the field. This upgraded handheld transceiver now features Enhanced Bluetooth® connectivity, which will allow you to connect to an Android device in Terminal and Access Point Modes, Dual operation of Terminal Mode and simplex/repeater operations and finally, an Updated USB-C charging/data port for faster connections and charging. This feature packed transceiver will allow you to enjoy portable operations like you've never seen before. The large 2.3 in. 230 X 280 pixel color display offers more information, an improved interface, with an industry-first color waterfall band scope for a VHF/UHF portable. The integrated speaker provides a booming 750mW of output so you never miss a contact. Additionally, the integrated Bluetooth allows for connectivity with a wide variety of external audio devices. New Features: - Enhanced Bluetooth® – Connect your Android™ in Terminal and Access Point Modes - Dual operation of Terminal Mode and simplex/repeater operations - Updated USB-C charging/data port for faster connections and charging
( 6 )
$749.95
Instant Rebate
Manufacturer Rebate
ICOM IC-705 HF/50/144/430 MHz All Mode Portable Transceiver
Icom IC-705 HF/50/144/430 MHz All-Mode Portable Transceiver brings the advanced features of the IC-7300, IC-7610 and IC-9700 to a portable QRP package. It features SDR Direct Sampling technology for low noise and low distortion receiver performance and incredible voice and digital transmission capabilities. Along with the same color touch screen and high speed, high resolution of the real-time spectrum scope and waterfall display, the rich set of features in the IC-705 will easily place this radio as the "Best Ever" All-Band All-Mode Portable! Here are many of the advanced features of the Icom IC-705 Portable Transceiver: * "Base Station" performance in compact package that you can hold with one hand! * Dimensions (WHD): 7.9 x 3.1 x 3.3 in. (20.0 x 8.0 x 8.5 cm) * All-band All-mode Transceiver Capability: 160-6m+2m+70cm; SSB/CW/RTTY/AM/FM/DV (D-STAR) * Full D-STAR capabilities including DR mode and Terminal Mode/Access Point Mode * Send, receive and view images on the IC-705 with no application software required * "General Receive" coverage from MW through 148 MHz, 430-450 MHz * Receives AM and FM Broadcast Bands and Air Band * Output power is 10W on external 13.8V supply or 5W with included clip-in rear panel battery pack (BP-272 Li-ion); supports QRP and QRP operation down to 0.5 W * 4.3 in. color touchscreen display – same as used in the Icom IC-7300 and IC-9700 * High-speed, high-resolution, real-time spectrum scope and waterfall display * SDR Direct Sampling below 25 MHz and Down-conversion IF above 25 MHz * Built-In GPS tracking logger, repeater locator and finds nearby D-STAR repeaters * USB port (micro-B) for direct interface * Wireless LAN (802.11 b/g/n Wi-Fi) for remote operation * Bluetooth - supports smartphone linking, remote control and Bluetooth wireless headsets and headphones * microSD Card Slot (microSD card not included) * Includes HM-243 Speaker/Mic with multi-function buttons * Optional LC-192 Multibag Backpack for easy portable operations Note: A single BNC antenna connector functions for all bands
( 127 )
$1,399.95
Manufacturer Rebate
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers feature internal component updates to ensure the highest performance from these true dual-receive transceivers. RF Direct Sampling takes you to the next level with advanced dynamic range performance and true dual receivers in the Icom IC-7610-32 transceiver. Whether it is poor band conditions or battling to pick out a call in a large pile-up, faint signals have always been a challenge for DXers and Contesters around the world. The difference between putting the QSO in the log or having to try another time is the combination of your skill as an operator and the capability of your receiver. One key factor, measured as RMDR, Reciprocal Mixing Dynamic Range, is the receiver's ability to pick out a faint signal in the presence of stronger, adjacent signals. The IC-7610-32 introduces dual RF direct sampling receivers that achieve 110dB RMDR, rivaling the performance of top-of-the-line transceivers. This model transmits on the Amateur bands 160 through 6 meters with 100 watts output on all modes, except 25 watts on AM, with full dual receiver coverage from 30kHz to 60MHz.
( 4 )
$3,999.95
ICOM ID-5100A-D VHF/UHF Digital Transceivers
ICOM ID-5100 A-Deluxe VHF/UHF Digital Transceivers feature an intuitive touch screen interface that provides quick and smooth operation for settings and editing various functions and memories. Their large, 5.5 in. 320 × 128 pixel touch display features an easy-to-see software keypad (QWERTY keyboard) that allows you to input alphanumeric characters quickly. Expanded receiver coverage includes 118-174 MHz and 375-550 MHz with dual receiver capability that allows you to receive two bands simultaneously (including within a single band). Almost all VHF and UHF communications are available to you! ID-5100A-Ds also have simultaneous receive for FM/FM and FM/DV modes, and the capability of monitoring two DV signals. The main band audio has priority if two DV signals come in at the same time. These transceivers feature integrated GPS which allows you to transmit and receive position data from the built-in GPS receiver. Position, course, speed and altitude are shown on the display. The GPS position information can be used for exchanging position reports, tracing the GPS log and searching for nearby repeater sites. Their GPS antenna is located in the remote head, no external GPS antenna required. The DV/FM repeater list function assists you in accessing near-by repeaters, even when you are visiting an area for the first time. This function searches for near-by repeaters using the repeater memories with the GPS position information. To use the repeater list function, the position data of the repeater is required in the repeater list. ID-5100A-Ds are shipped with a limited number of repeater memories preprogrammed. Dplus Reflector link commands are added to the DR function to allow easy reflector operation. Use Reflector, link/unlink to Reflector, echo-test and repeater information commands are selectable. Built-in CTCSS and DTCS tones are used for accessing closed repeaters or tone squelch operation. The pocket beep alerts you with a beep sound when the transceiver receives a preset tone. 1750 Hz tone is also available. The UT-133 optional Bluetooth® board is necessary for operation with the optional VS-3 headset and the optional RS-MS1A, Android™ application. (Free download from Google Play™) The Android™ application also provides second-station control through an Android device. Other features: * Menu-driven touch-screen user interface * DTMF via microphone or ID-5100 display * Enhanced D-PRS functions with object, position, item and weather formats * Convenient memory contents management using CSV data format * Speech function announces operating frequency, mode and received call sign (DV mode) * Independent main dial, volume and SQL knobs for A/B bands * AM air band dualwatch * CS-5100 programming/cloning software supplied * 50W output power on both VHF and UHF bands * Weather channel with weather alert function * Auto repeater function Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories: * MBA-2 Remote Head Mounting Bracket (Main Body Mounting Bracket, MBF-4, is optional) * Hand microphone, HM-207 * Controller cable, OPC-837 (3.5 m; 11.4 ft.) * Microphone hanger * Spare fuse The most advanced VHF/UHF mobile transceiver with digital D-STAR capabilities is now available! Order your one of your own ICOM ID-5100A-D VHF/UHF Digital Transceivers from DX Engineering and enjoy VHF/UHF communications more than ever!
( 83 )
$549.95
On Sale
ICOM IC-718 HF All Band Transceivers
ICOM IC-718 HF All Band Transceivers make communicating with the world easy! The superior performance of these HF base transceivers allows you to make contacts over long distances--even to the other side of the world! With excellent receiver sensitivity, a wide dynamic range, high signal-to-noise ratio, and full-duty operation, the ICOM IC-718s offer the latest RF and digital technology in a compact size. Clean, clear audio is easily heard from the front-facing speaker and the IC-718s feature a minimum of switches and controls to simplify operation. Plus, a soft-touch 10-key pad allows for the direct entry of an operating frequency. These are great HF starter transceivers but they will also thrill the accomplished ham, because the IC-718s are very simple to use. The IC-718 HF All Band transceivers will definitely be the most practical DSP rigs you will ever own! They provide many useful features that you want and need--and the price isn't bad, either! Some quick specs: * 160 through 10 meter operation (60 meter channels not available) * Continuously adjustable RF power output -- 100 watts maximum to 2 watts minimum (SSB and CW modes) -- 40 watts to 2 watts (AM mode) * 30 kHz through 30 MHz general coverage receiver * 1 Hz frequency resolution * 101 memory-scan channels Other great features include: * Includes DSP noise reduction and auto notch (UT-106 module) * RF gain control * RF attenuator and preamplifier * Adjustable level noise blanker * IF shift control * Receiver Incremental Tuning (RIT) * Band stacking register * Tuning rate auto step-up function * Digital S/RF meter * VOX operation * Adjustable microphone audio compressor * Electronic CW keyer Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand-held microphone * DC power cable and spare fuses These little transceivers are great for portable use or as Field Day equipment. They also make great back-up transceivers for well-equipped ham shacks. New Ham or not, one of these IC-718s is a nice addition to any station. Order ICOM IC-718 HF All Band Transceivers from DX Engineering and enjoy some easy QSOs.
( 47 )
$1,099.95
$899.95
Manufacturer Rebate
ICOM ID-50A VHF/UHF Multi-Function D-Star Handheld Transceivers
The ICOM ID-50A is a compact, dual band 2m/70cm digital transceiver that brings the fun of the D-STAR to life and includes functions to enhance your QSO experience making the ID-50A the perfect travel companion. The Band Scope and Waterfall displays can visually show active channels with a wide span and timeline, making it easy to find active channels by sight. The Dual-Watch function doubles QSO opportunities to monitor VHF/VHF, VHF/UHF, and UHF/UHF bands at the same time and can receive both FM and Air bands. The built-in GPS receiver displays the current grid square information and this GPS position data can be used for Position Auto Reply, Near Repeater Search and GPS log functions.
( 12 )
$499.95
On Sale
ICOM IC-V86 VHF FM Portable Handheld Transceivers
ICOM IC-V86 VHF FM Portable Handheld Transceivers give you more audio, more RF power, more coverage and more battery capacity in a compact, MIL-STD portable 2 meter HT. Producing 1500 mW of audio power to an improved chassis design and speaker, the IC-V86 lets you easily hear incoming signals in loud, noisy environments. The IC-V86 transmit coverage is expanded with 7W of RF output power and the new 2250mAh Li-Ion battery pack also provides longer operational capabilities. Useful features, functions and specs and of the ultra-rugged ICOM IC-V86 FM 2 meter HT: - Frequency Range - TX: 144-148 MHz, RX: 136-174 MHz - Output power - 7.0/5.5/2.5/0.5 W (EX Hi/Hi/Mid/Low) - Type of emissions - F2D, F3E (FM, FM-N) - Durable BNC female antenna connector - 200 memory channels, 6 scan edge channels and 1 call channel - Maximum Frequency Deviation: ±5.0 kHz/±2.5 kHz (FM Wide/ FM Narrow) - Selectable Volume Level, VFO/Memory Channel Selection Control - Integrated VOX function - Built-in CTCSS and DTCS Encode Decode and Tone Scan - IP54 Waterproof rating - IP67 Rating for dust-tight and waterproof protection - MIL-STD-810 -C,-D, -E and –F; passed environmental tests for pressure, temperature, sun, rain, humidity, salt fog, dust, vibration and shock - Dimensions (WHD) 2.3 × 4.4 × 1.2 in (58.6 × 112 × 30.5 mm) with supplied BP-298 battery pack - Made in Japan - Quality and Reliability Supplied Accessories (May differ, depending on transceiver version): - BP-298 Battery Pack - BC-240, Desktop Charger - BC-242, AC Charger Adapter - MB-124 Belt Clip - Antenna, BNC Rubber Whip
( 33 )
$139.95
$129.95
ICOM IC-V3500B Black Edition 2M VHF FM Mobile Transceivers
ICOM IC-V3500B Black Edition 2M VHF FM Mobile Transceivers combine a durable mechanical design with clear, intuitive operation and updated display technology. The latest Black Edition introduces a high visibility black inverted LCD, providing enhanced contrast and readability in a wide range of lighting conditions. The dark background improves clarity for frequency, channel, and function indicators, making the transceiver easier to monitor at a glance whether driving in bright daylight or operating at night. These transceivers deliver a full 65W of selectable RF output power for the 144–148MHz transmit range, backed by a large heatsink that stabilizes thermal performance during extended operation. They also offer wideband receive capability from 136–174MHz, providing wideband VHF receive coverage for expanded monitoring capability Audio performance remains a core strength, with the internal speaker producing 4.5W of loud, articulate sound thanks to improved frequency response and an optimized acoustic opening. Instant volume boost and one touch mute options provide quick level control when conditions change. The IC-V3500B transceivers also include emergency call and alert functions, which transmit alternating alarm tones and live microphone audio while sounding a local alarm from the speaker. For memory and scanning flexibility, the IC V3500B series provides 207 memory channels with alphanumeric naming, dynamic bank link scanning, CTCSS/DTCS encoding and decoding, and priority watch capability. Weather channel reception and weather alerts are available, further enhancing situational awareness. Construction remains robust, meeting MIL STD 810G environmental standards. Configuration is streamlined through free PC programming software, and many functions can be controlled directly from a compatible remote control microphone, simplifying installation and day to day use in mobile environments.
( 2 )
$239.95
Icom RC7760 Remote Control Head Units
Icom RC7760 Remote Control Head Units – available here as an identical extra or replacement – work exclusively with the RF Deck of an IC-7760 Transceiver. This separate item is exactly the same Remote Control Head as supplied with the IC-7760, featuring both the 7-inch wide TFT and a 2.4-inch TFT. Functions are accessed and information is displayed exactly as on the Remote Control Head supplied with the IC-7760, including dual speakers for the independent MAIN and SUB receivers. An AC-DC wall supply (BC-267A) is included. For use remotely or as a backup replacement, the Icom RC7760 is available from DX Engineering.
Not Yet Reviewed
$2,189.95
On Sale
ICOM IC-R6 SPORT Communications Receivers
ICOM IC-R6 SPORT Communications Receivers have an ultra-wideband frequency range, covering from 100 kilohertz to 1,309.995 Megahertz. Even so, they provide superior sensitivity and selectivity characteristics that resist interference. A wide variety of utility and government communications, amateur radio stations, AM, FM, and short wave broadcast stations may be monitored with these receivers. A valuable feature, the Voice Squelch Control, opens the squelch only when a modulated signal is detected. It's a handy feature for listeners scanning for news, talk, and music--not data bursts or beacons. IC-R6 SPORTs have 100 channels per second of high-speed scan capability when in VFO mode. This superior scanning power provides efficiency when searching over 1,309 MHz of spectrum! With 1,300 alphanumeric memory channels, 50 scan edges, 200 auto-write memories, and 22 memory banks, ICOM IC-R6 SPORT Communications Receivers give you unparalleled scanning flexibility! These IC-R6 SPORTs are very energy-efficient! Power is supplied by two standard AA alkaline batteries. You may also operate the IC-R6 SPORT utilizing the optional DC car cord. Or use optional rechargeable NiMH cells with optional wall charger and perhaps the convenient drop-in stand. The power choices are all yours! Additional features include: * Built-in audio low-pass filter * Plus/minus 1.0ppm high-frequency stability at 25 degrees C * Ferrite bar antenna for AM broadcast * 150 mW loud audio with internal speaker * DTCS and CTCSS tone squelch and reverse tone squelch * Priority watch function with priority beep function * CI-V remote port for receiver control * PC-programmable with optional CS-R6 software * Receiver-to-receiver cloning with optional OPC-474 cloning cable * Auto power OFF-selectable 0.5-2 hours and end of busy signal * Compact, drip-resistant construction * Duplex operation monitoring * Automatic LCD backlight * Dial speed acceleration * Built-in RF attenuator * Auto memory-write scan stores the detected frequency, mode, and tone into a specified memory * Reversible up/down buttons and dial knob for volume, frequency, memory channel, scan direction, and set mode settings * Weather channel receive with WEATHER ALERT on the USA version only * Cellular coverage is BLOCKED in the USA version Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories: * Antenna * Belt clip * Hand strap OPTIONAL accessories: * BC-196SA wall charger (radio requires two Ni-MH AA cells, not included) * CP-18A DC car cord * BC-194 desktop drop-in base for use with BC-196SA or CP-18A * SP-27 tube (clear-stealth) earphone NOTE: IC-R6 receivers use an antenna with an SMA male connector. The receiver itself has an SMA female connector. These ICOM IC-R6 SPORT Communications Receivers hand you the world… quite literally in the palm of your hand! Thirty years ago, most of the features of these pint-sized portable communications receivers would have been found in only the highest-priced tabletop models. Many of their features didn't exist at all! Don't miss out on any of the action! For your handheld communications receiver needs, contact DX Engineering today for one of your own ICOM IC-R6 SPORT Communications Receivers!
( 11 )
$239.95
$195.95
Clearance
ICOM ID-52A VHF/UHF Multi-Function D-Star Handheld Transceivers
ICOM ID-52A VHF/UHF Multi-Function D-Star Hand-Held Transceivers allow you to enjoy portable operations like you've never seen before. The large 2.3 in. color display offers more information, an improved interface, and an industry-first color waterfall band scope for a VHF/UHF portable. The integrated speaker provides a booming 750 mW of output so you never miss a contact—and the integrated Bluetooth allows for connectivity with a wide variety of external audio devices. * Key Features: - Integrated GPS - Micro USB port for PC connectivity and battery charging - Micro SD card slot - DR mode for D-STAR operations - Dualwatch with new DV/DV mode - IPX7 submersible rating - Transflective screen layer for improved visibility in direct light - VHF/UHF Airband and FM broadcast receive - Improved heat dissipation efficiency - QSO log in CSV data format - Voice recorder function Larger radio, larger color display, and louder audio. The ID-52A is much more than a replacement to the ID-51A, it's a new way of communicating! An industry-first, a hand-held with a full color waterfall display and the ability to send photos over the D-STAR network. The ID-52A continues to support D-STAR functions with DR mode for easy access to local repeaters based on the internal GPS information, as well as Terminal and Access Point modes. Additionally, the radio weighs a mere 10.4 oz. (295g) and has an 80 percent increase in overall volume to hear in loud conditions. Receive Modes - Dualwatch allows for the monitoring of two frequencies or bands simultaneously. VHF/VHF, UHF/UHF and VHF/UHF monitoring are all supported along with the new ability to decode two DV signals simultaneously. Quickly call from either the main or sub bands on the fly. Enhanced UHF capabilities allow for monitoring of Military Air Bands from 225 to 374.995 MHz, and the wideband receiver allows for listening to nearby broadcast FM stations. Bluetooth Enabled Features - The ID-52A incorporates common Bluetooth profiles for audio and data controls, which provide new mobility in the palm of your hand. Icom leads the way by pairing either Icom or third-party headsets for voice communications. The optional VS-3 Bluetooth® headset with the large PTT button allows for hands-free operation. Additionally, users can program 3 buttons to improve operability and mobility. Download the RS-MS1A Remote Control Software on Google Play to change operating frequencies, send texts, and more! Integrated GPS/GLONASS Receiver - With a GPS lock, use the D-PRS mode to send location data, as well as show received station location, distance, and direction. The ID-52A also displays current Grid Square information. This GPS position data can be used for the Position Auto Reply, Near Repeater Search and GPS log functions. Icom ID-52A Specifications (partial, subject to change): * Output Power: 5W / 2.5W / 1.0W / 0.5W / 0.1W * Wideband Receiver Frequencies: 88 – 174 MHz, 225 – 479 MHz * TX Frequencies: 144-148, 440-450 MHz * Channels: 1000 * Bluetooth: Built-in * GPS: Built-in * Waterproof Rating: IPX7
( 26 )
$649.95
$589.95
Manufacturer Rebate
ICOM IC-R15 Wideband Handheld Receivers
ICOM IC-R15 Wideband Handheld Receivers allow both the beginner and experienced user alike to discover the exciting world of radio reception. The IC-R15 covers a wide frequency range from 108 - 500 MHz, allowing you to receive a diverse array of radio signals, whether it's VHF Aeronautical Radio in AM, Amateur Radio on 2m and 70cm, Railway, Marine, or regional broadcast stations in AM/FM and Wideband FM (WFM) from 76 – 500 MHz. The versatile and reliable IC-R15, with its state-of-the-art technology and elegant design sets new standards and ensures that even users with minimal experience can quickly get on the air.
( 1 )
$559.95
ICOM Handheld Alkaline Battery Cases
Being prepared is the key with ICOM handheld alkaline battery cases. They let you power your handheld transceiver with easy to find alkaline batteries, which have extremely long-term shelf life. Battery cases for your HT are handy for those awkward, low battery pack moments. Keep ICOM handheld alkaline battery cases and alkaline cells on hand and keep your ICOM radio on the air!
( 8 )
$27.99
—
$59.99
ICOM D-STAR Third Generation Repeaters
ICOM D-STAR Third Generation Repeaters support analog, D-STAR and a mixed mode configuration. While analog operation is for local communications, combine the D-STAR mode with the ID-RP3 G3 software to join the D-STAR Global network. In addition to mixed mode functionality, the G3 hardware combines the D-STAR repeater controller and RF module into one 2U rack mount unit. Model, Output Power, Frequencies, Modes: ID-RP2010V, 25W, 144-148 MHz, DV/FM; ID-RP4010V, 25W, 440-450 MHz, DV/FM; ID-RP1200VD, 10W, 1240-1300 MHz, DV/DD*/FM An integrated controller is built onto the repeater to function with the RF module unit. Additionally, each repeater can act independently to relay receive signals. Connect the repeaters with the supplied Ethernet cable for cross-band operation. The repeater's RF module in the repeater can operate as a single band D-STAR/FM repeater; the ID-RP2C is not required. *The ID-RP1200VD is a 1.2 GHz repeater that is switchable between DV or DD mode. DD mode operation acts as a wireless modem through a computer's Ethernet port to provide data communication and internet access up to 128 kbps. Use the IC-9700's 1.2 GHz DD mode to set it up as a wireless modem. Key Features of the D-Star Third Generation Repeaters: - LTE capable, suitable for emergency deployments - RF direct sampling and FPGA platform - Compatible with the external ID-RP2C repeater controller - SD card slot for firmware updates save setting data, FM mode, and Voice ID audio Connect the optional LTE unit, UX-262 to directly connect an LTE network and the internet. One LTE network can be shared with multiple repeater modules on one site. A data SIM card provides network coverage. A static Global IP address is required for the internet SIM. Combining the internal Gateway function and the LTE unit can make a deployable provisional D-STAR repeater site for emergency situations.** ** Please check the legal requirements before using the provisional repeater site The IDRP2010V/RP4010V repeater uses the latest RF Direct Sampling method. The ID-RP1200VD uses a 1.2GHz, Down Conversion IF sampling. This means when the signals are processed in the FPGA, it greatly improves the receiver's sensitivity. Other Features: - High duty cycle operation - Replace a repeater module in the ID-RP2 series D-STAR repeaters, as the new modules are compatible with the ID-RP2C controller - CW ID/Voice ID transmitter - SD card slot for firmware updates, save setting data, FM mode, and Voice ID audio - Each RF module has a 10 MHz reference signal input - Each RF module has an internal controller providing CTCSS, DTCS codes, 1750 Hz tone and CW/Voice ID programmable for analog FM mode Supplied Accessories: - DC power cable (3m, 9.8 ft.) - Fuses - Ethernet cable (0.6m, 2.0 ft.) - Rubber stands - USB cable (1M, 3.2 ft.) - Allen wrench More information is available from the Icom America website. Order ICOM D-STAR Third Generation Repeaters from DX Engineering.
Not Yet Reviewed
$2,688.99
ICOM Handheld Li-Ion Battery Packs
If you are in need of a new battery, or perhaps you want to upgrade, check out these ICOM handheld Li-Ion battery packs. Lightweight for easy portability, Lithium-Ion battery packs will supply more power for a longer time than standard packs. Available for several models, they will keep you operating for hours! You may just want to buy extra ICOM handheld Li-Ion battery packs to keep on hand for those "Oops, out of power!" moments!
( 29 )
$72.99
—
$155.99
ICOM Handheld Speaker-Microphones
ICOM Handheld Speaker-Microphones give you the best possible transmit audio and receive sound for your ICOM handheld radio. These speaker microphones were specifically designed by ICOM engineers for ICOM transceivers and provide an ideal match to the radio circuitry. These fine speaker microphones offer various features to make your ham radio experience richer and more fun. There are ruggedized models, light duty models, and some with specialized connectors. These quality speaker microphones will also work on many other brands! You can bring world-famous ICOM excellence to your present handheld to upgrade your speaker-microphone or to replace lost or damaged units. Regardless of the handheld radio you currently have or how you plan to use it, you'll find just the right ICOM Handheld Speaker-Microphones you need at DX Engineering!
( 13 )
$57.99
—
$174.99
ICOM Mobile Transceiver Mounting Brackets
ICOM Mobile Transceiver Mounting Brackets provide for the mounting of your faceplate and/or radio unit for easier viewing and use. Sturdy metal brackets offer secure mounting. Many ICOM accessory mounting brackets are available individually or as a kit with a separation cable. Some brackets reuse original hardware supplied with the new radio and are supplied as brackets, only. Remote mount your control head and your main mobile transceiver units with help from ICOM Mobile Transceiver Mounting Brackets from DX Engineering.
( 60 )
$27.29
—
$183.99
ICOM Handheld Wall AC Adapters
Keep your radio powered at all times with one of these ICOM handheld wall AC adapters. Available for several models, these adapters will plug directly into some handheld radios, and others will require a charger unit, sold separately. Regardless, ICOM handheld wall AC adapters will keep you powered or charged and operating for hours.
( 4 )
$19.99
—
$41.99
ICOM Handheld Carrying Cases
Are you worried about getting scratches on your handheld radio? ICOM handheld carrying cases have you covered. Available for several models, ICOM handheld carrying cases will help keep your radio protected and looking like new.
( 6 )
$32.99
—
$38.99
ICOM Premium Hand strap
This premium Icom hand strap is the perfect compliment to any Icom handheld. Crafted from synthetic leather, this high-quality strap with its vibrant red body and black edging with contrasting stiches will provide a comfortable grip for your hand while ensuing that if your radio slips from your grip, it will be safely stopped by the hand strap. The hand strap measures 5.5 in. (140 mm) in length and is tapered from 0.9 in. (22 mm) to 0.7 in. (17 mm) in width.
Not Yet Reviewed
$32.99
Manufacturer Rebate
ICOM IC-7300 HF Plus 50 MHz Transceivers
ICOM IC-7300 HF Plus 50 MHz Transceivers employ a new-technology real-time touch-screen spectrum scope that leads its class in resolution, sweep speed and dynamic range. While listening to received audio, you can check the real-time spectrum scope and quickly move to another signal. When you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune to the desired signal. The combination of the waterfall function and the real-time spectrum scope assists in maximum receive performance of IC-7300 radios and increases QSO opportunities without missing weak signals. The waterfall function shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the real-time spectrum scope. The audio scope function can be used to observe various AF characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Either transmit or receive audio may be displayed on the FFT scope, with the waterfall function and the oscilloscope. The large 4.3 in. color TFT touch LCD offers intuitive operation. Using the software keypad of the touch screen, you can easily set various functions and edit memory contents. IC-7300 transceivers employ an RF direct-sampling system. RF signals are directly converted to digital data and processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction. This system is a leading-edge technology; creating a new era in amateur radio. The new "IP-plus" function improves 3rd order intercept point (IP3) performance. When a weak signal is received adjacent to strong interference, the AD converter is optimized against signal distortion. IC-7300 transceivers' RMDR is improved to about 97dB (typical value) and Phase Noise characteristics are improved about 15dB (at 1 kHz frequency separation) compared to the IC-7200. The superior Phase Noise characteristics reduce noise components in both receive and transmit signals. IC-7300's have 15 discrete RF band-pass filters. The RF signal is passed through only one of the band-pass filters, while any out of range signals are rejected. High Q factor coils are used to minimize the loss in the RF band-pass filters. The built-in antenna tuner memorizes its settings based on your transmit frequency, so that it can rapidly tune when you change operating bands. The Enforced Tuning function allows a wide range of temporary antennas to be tuned. NOTE: Do not use the Enforced Tuning function except in case of an emergency. Transmitter output power may be automatically reduced. IC-7300 transceivers can store various contents into an SD card, such as received and transmitted audio, voice memories, RTTY/CW memories, RTTY decode logs and captured screen images. Updated personal and firmware data can also be stored to the SD card for easy setting. To offer superior sound quality, a new speaker unit has been incorporated and is designed into the aluminum die-cast chassis; not just squeezed in as a necessity. Other IC-7300 features include: * HM-219 hand microphone supplied * Large, effective cooling fan system * Multi-function meter * 101 memory channels (99 regular, plus 2 scan edges) * Optional RS-BA1 IP remote control software (the spectrum scope with the waterfall can be observed) * CW functions: Full break-in, CW reverse, CW auto tuning Note: For additional information, look at the files under the "Documentation" tab. The innovative features included in ICOM's IC-7300 offer tremendous advantages and represent a paradigm shift for its modest price point. ICOM says of its 7300 that "The Real HF Fun Starts Here." Order one of their ICOM IC-7300 HF Plus 50 MHz Transceivers and discover the fun to be had with leading-edge technology transceivers from DX Engineering!
( 553 )
$1,039.95
ICOM Handheld Cigarette Lighter Cables
Keep your radio powered at all times with one of these ICOM handheld cigarette lighter cables. Available for several models, these cables will plug directly into some handheld radios, and others will require a charger unit, sold separately. Regardless, ICOM handheld cigarette lighter cables will keep you powered or charged and operating for hours.
( 3 )
$33.99
—
$46.99