Availability
InnovAntennas VHF/UHF Beam Antennas
InnovAntennas LFA3-HG 50 MHz 5-Element Yagi
InnovAntennas 50 MHz LFA3-HG 5-Element Yagi was designed to have the best gain on a relatively short boom. This antenna offers forward gain of 10.7 dBi (16.2 dBi at 10m above ground) and an exceptional 31 dB front-to-back rating with SWR less than 1.4:1 in the 50-50.4 MHz range. The low profile LFA3 dipole achieves a significant reduction of noise, allowing clear reception of much weaker signals, a key component of operational improvements and success. The LFA3-HG has a 12.8 ft. boom and a low 2 sq. ft. wind load, making this beam ideal for typical 6 meter stations as well as for stacking to maximize gain, especially when available space restricts the use of a longer boom Yagi. It features a 1.25 in. (32mm) 16-guage square aluminum tubing boom for rugged reliability and low weight. This antenna is made with single piece 5/8 inch (15.88mm) element centers, 1/2 inch (12.7mm) tips with loop ends made with 3/8 inch (9.525mm). The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. The introduction of the loop-shaped and phase-fed dipole achieves considerably fewer side lobes in the Yagi directional pattern. With less energy absorbed from the sides and from behind, these antennas becomes quieter and they achieve a higher forward gain. The 50 MHz Monoband LFA Yagis from G0KSC represent a significant advancement in the development of Yagi antennas.
( 1 )
$529.99
InnovAntennas VHF UHF Plus Log Periodic Dipole Array Antennas
InnovAntennas VHF UHF Plus Log Periodic Dipole Array Antennas are specifically designed to serve in a wide range of Amateur, industrial and commercial radio applications. Two frequency coverage models feature: - Broadband frequency coverage with good directionality - Horizontal or Vertical Polarization Mounting - Gain and front-to-back performance for specific purposes as compared to Omni-directional zero-gain Discone - RF Power Handling up to 1000 watts - Boom End Mount max. 2 in. (50 mm) mast - Computer-optimized 50 ohm feedpoint design for direct coaxial cable connection - Robust construction with high-quality materials InnovAntenna Log-Periodic Antennas offer state-of-the-art technology and quality along with impressive versatility and reliability. Achieve performance and efficiency for your specialized radio applications.
Not Yet Reviewed
$579.99
InnovAntennas 50MHz 6-Element LFA3 Low Noise Yagi
InnovAntenna 50MHz 6-Element LFA3 Low-Noise Yagi offers excellent performance across the important 50.0 – 50.5 MHz weak signal section of the 6 meter band. This Loop Fed Array Yagi is a full size beam with a 22.4 ft. boom, and it offers forward gain of near 12dBi and an amazing front-to-back of 29dB. This rugged 6 element LFA3 third generation beam features a bent reflector for more consistent impedance, pattern and performance. The Loop Fed Array has a direct-feed 50-ohm feedpoint with no matching losses. G0KSC LFA Yagis are a major step forward in the development of the Yagi Antenna, providing an ultra low-noise "front-end" for any advanced 50 MHz radio. Their well suppressed side lobes in both H and E planes provide excellent side and rear rejection of unwanted signals and noise, making this model ideal for locations with high levels of RF noise. The InnovAntennas 6-element LFA3 Yagi antenna is made to serve in any conditions, with an strong square aluminum tubing boom that is 1.50 in. (38mm) by 0.078 in. (2mm) wall thickness. Tapered elements consist of 0.50 inch (12.7mm) element centers and 0.375 in. (9.5mm) element end sections. Fully insulated elements ensures continuous, high performance in all weather conditions for many years to come. The boom-to-mast bracket accommodates up to a 2-inch (50mm) mast for this horizontally polarized 6-element LFA3 Low Noise Yagi antenna. For the 6-meter enthusiast who wants to beat the noise, enjoy great gain and front-to-back performance, this 6-element LFA3 is ready to serve you well on 50MHz.
Not Yet Reviewed
$619.99
InnovAntennas 50MHz 6-Element LFA-MAX Low Noise Yagi
InnovAntenna 50MHz 6-Element LFA-MAX Low-Noise Yagi is about 3 ft. shorter than other 6-element 6 meter beams but has only 0.7dB less forward gain! It offers excellent performance across the important 50.0 – 50.4 MHz weak signal section of the 6m band. Even though this Yagi has boom only 19.16 ft. long, it produces a forward gain of nearly 11.2dBi and an incredible front-to-back of 31.5dB. This Yagi has a Bent Reflector system designed to enhance SWR bandwidth and front-to-back. And it features a direct-feed 50-ohm feedpoint which eliminates matching losses and is ready to weather severe conditions, with an strong square aluminum tubing boom that is 1.57 in. (40mm) by 0.078 in. (2mm) wall thickness. Tapered elements consist of oversized 0.63 inch (16mm) element centers and 0.51-inch (13mm) element end sections, both with 0.078 in. (2mm) wall thickness. Fully insulated elements ensures continuous, high performance in all weather conditions for many years to come. The boom-to-mast bracket accommodates up to a 2-inch (50mm) mast for this horizontally polarized 6-element LFA-MAX Low Noise Yagi antenna. There are a lot of us... aspiring 6-meter hams in the city where noise is a problem, who want a beam with great gain and amazing front-to-back performance. But space and money is tight? The InnovAntennas 6-Element LFA-MAX is ready!
( 1 )
$699.99
InnovAntennas 50MHz 7-Element LFA-HD Low Noise High Performance Yagi
InnovAntenna 50MHz 7-Element LFA-HD Low Noise Yagi offers amazing performance for its price for the critical 50.0 – 50.4 MHz weak signal section of the 6m band. This "Loop Fed Array" Yagi is a full size beam with a 29.2 ft. boom length and it offers great forward gain of 12.8dB and an incredible front-to-back specification of 43.3dB! This rugged LFA-2 second generation 7 element beam features a direct-feed 50-ohm feedpoint, no matching losses and excellent rejection of unwanted signals and noise. It's well suppressed side lobes in both H and E planes make this model ideal for very noisy city locations. The InnovAntennas 7-element LFA-HD Heavy Duty Yagi antenna is truly made to survive harsh weather conditions, with a rugged square aluminum tubing boom that is 2 in. (50mm) at the center, tapering to 1.77 in. (45mm) and 1.58 in. (40mm) at the ends, with each section a 0.078 in. (2mm) wall thickness. Tapered elements consist of oversized 0.63 inch (16mm) element centers and 0.51-inch (13mm) element end sections, both with 0.078 in. (2mm) wall thickness, the same as the boom. Fully insulated elements ensures continuous, high performance in all weather conditions for many years to come. The boom-to-mast bracket accommodates up to a 2-inch (50mm) mast and a Kevlar single-line truss support system is provided with this horizontal polarized 7-element LFA-HD Yagi antenna. A capable and accurate tower-mounted rotator is required. For the 6-meter enthusiast who wants to beat the noise, enjoy great gain and incredible front-to-back performance, all for a great price, THIS 7-element LFA-HD is one of the most exciting 50MHz Yagis on the market!
Not Yet Reviewed
$715.99
InnovAntennas OP-DES 50 MHz Yagi Antennas
InnovAntennas OP-DES 50 MHz Yagi Antennas are a relatively new development from InnovAntennas. OP-DES stands for Opposing Phase Driven Element System, in which the ends of the dipole radiator of these antennas is angled backwards towards the reflector, parallel to the boom. This results in opposing phase relationships in the ends of the driven element, providing a very clean directional pattern with few side lobes. The OP-DES Yagi has optimized gain over a wide frequency range, while retaining a good front-to-back ratio. The driven element dipole of an OP-DES antenna has a low impedance of 50 ohms. This eliminates the need for matching elements or a transformer balun. For this reason, the antenna is offered without a balun, but an RF choke balun made of ferrites on coax should be used at the feedpoint terminal studs. With the coaxial cable directly connected to the driven element dipole, well over full legal limit power levels are possible. Like all InnovAntennas Yagis, the OP-DES 50MHz antennas are extremely robustly constructed; the larger model uses truss cables for the boom. All elements of the antenna use high quality aluminum, the clamps and screws are made of stainless steel. The supplied mast clamp is designed for masts up to 2 in. (50mm) diameter. Application Description Monoband Yagis are often used at contest stations, or when you want to use only one band for a certain time, for example to focus on a specific target during sunspot minimum. Another advantage of monoband antennas are the stacking possibilities, i.e. the arrangement of two or more identical antennas properly spaced from each other. InnovAntennas Yagis provide all the necessary technical specifications, so there is no guesswork about the stack spacing. The InnovAntennas OP-DES 50 MHz Yagis are designed through careful numerical optimizations to provide excellent gain with good bandwidth. As a result, a low SWR of 1.1:1 is achieved in the frequency range of 50.0 - 50.6 MHz (6-element) or 50.0 - 51.35 MHz (5-element). The experience of the developer Justin, G0KSC ensure superior operations with these antennas in practice, often supported by a lively exchange between users. TECHNICAL DATA InnovAntennas OP-DES 50 MHz Yagi (Monoband) Antenna Mast Mount: Center Antenna Type Directional Antenna Band 6m Power Handling: 5000 W Polarization: Horizontal Balun Included: No Mast Diameter Max.: 2.00 in. (50mm)
( 2 )
$529.99
InnovAntennas 144MHz 20 Element X-Pol LFA Low Noise High Performance Yagis
InnovAntennas 144MHz 20 Element X-Pol LFA Low Noise Yagis offer excellent performance in the 143.85 to 145.36 MHz This Loop Fed Array Yagi is a full-size beam with 19.02 foot boom, featuring 14.82 dBi of forward gain and a front to back specification of 39.1 dB. Designed by G0KSC, this LFA Yagi is a step forward in the design of yagi antennas, providing an ultra-low noise "front-end" for today's modern 144MHz radios. This rugged 20 element (10 horizontal and 10 vertical) features a 50-ohm feedpoint so there are no matching losses. The InnovAntennas 20-element X-Pol Yagi is built to withstand harsh weather conditions, with 1.5 x 1.5 in. (40x40mm) square aluminum tubing for the boom and .25 in. (6mm) aluminum tubing for the passive elements; the active elements are .5 in. (13mm) in diameter. Stainless Steel hardware is used throughout the antenna to ensure years of trouble-free service. The boom-to-mast bracket accommodates up to a 2-inch (50mm) mast. Specifications and Performance: Gain: 14.82 dBi Peak Gain: 14.82 dBi @ 144.3MHz F/B: 39.1 dB Peak F/B: 37.43 dB Max Power 10 kW SWR: Below 1.1:1 from 143.85MHz to 145.3MHz Boom Length: 19.02 ft. (5.8m) Turning Radius: 9.84 ft (3m) Wind Survival: 99.5 MPH (160 km/h) Weight: 14.33 lbs. (6.5kg) Wind Loading: 2.41 sq. ft. (0.22sqM) Stacking information: Vertical Stacking Spacing Distance: 3.1m for minimum under-lobes.
Not Yet Reviewed
$679.99
InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas
InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas are an exciting development for the fascinating hobby of long distance (DX) reception of free, over-the-air broadcast FM radio. The OP-DES Yagi directional antennas are specially designed for better gain, great front-to-back and patterns with fewer side lobes, to dramatically improve your reception experience by helping your tuner or receiver achieve a new level of performance. For FM DX enthusiasts who own great FM Tuners and Receivers, pulling in new distant stations at full quieting is thrilling. Capturing a weak station while rejecting an on-channel stronger station can be especially gratifying. Hearing distant fringe and local stations at full fidelity without noise is the ultimate goal for FM audiophiles as well as FM DXers. Even HD Radio enthusiasts can increase their channel count with full sound quality and fewer dropouts. One of the distinctive design features of the OP-DES Yagi Antennas is a low feedpoint impedance that allows either 50 ohm or 75 ohm coaxial cable to be connected directly to the driven element, eliminating the losses of a transformer balun. With several boom lengths available, for the FM enthusiast on a budget, for the casual listener with a treasured vintage receiver, and for the most discerning FM Tuner audiophile, best-ever reception is possible with an InnovAntenna FM Broadcast OP-DES Yagi. InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas are available as: IVA-18484-0108 Compact and Space-Saving 8 element, 6.5 ft. boom, 9 to 10 dBi gain, typ. 24 dB f/b IVA-18484-0145 Cost-Effective Performance 11 element 12 ft. boom, 9.8 to 12.6 dBi gain, typ. 25 dB f/b IVA-18484-0110 High Performance 14 element, 18 ft. trussed boom, 10-13 dBi gain, 20 to 42 dB f/b IVA-18484-0112 Ultimate Performance 18-element, 24 ft. trussed boom, 11-14 dBi gain, 20 to 44 dB f/b Choose the InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antenna that is right for you. Immerse yourself in a world of music, news and entertainment and discover a clarity and fidelity that you never heard before on your FM Tuner or Stereo Receiver.
( 2 )
$519.99
—
$569.99
InnovAntennas LFA-Q 4 Element 50 MHz Loop Quad Beams
InnovAntennas LFA-Q 4 Element 50 MHz Loop Quad Beam from G0KSC represents significant development of LFA Yagis with a substantial difference. The LFA-Q (Loop Fed Array Quad) uses top and bottom booms and through-boom LFA Yagi-style loops arranged vertically for every element. This very rugged design achieves better gain for a given length of boom than standard or LFA Yagi. Also, instead of using symmetrical square or triangular loops, the shape of the loops has been compressed into rectangular form, so the short side sections are exactly 180 degrees out of phase resulting in a cancellation effect, like a balanced line. InnovAntenna LFA-Q achieves great rejection to the sides and the rear of the antenna while retaining excellent gain, f/b and SWR bandwidth across the band. These are amazingly compact, high gain antennas constructed to withstand serious weather conditions! The 50MHz 4 Element LFA-Q is made with tapered elements one-half inch (12.7mm) center sections and 3/8 inch (9.525mm) outer sections. The antenna has fully insulated elements which will ensure continuous, high performance for years to come. The LFA-Q has a twin-boom system, 32mm square with 1.6mm wall thickness. Two boom-to-mast brackets are provided, one on each boom, formed from marine grade stainless steel. Both brackets include 2 square U-bolts for the boom and 2 round U-bolts for the supporting mast. InnovAntennas LFA-Q 4 Element 50 MHz Loop Quad Beam Specs: Gain: 11.26dBi @ 50.150MHz F/B: 29.9dB @ 50.150MHz Peak Gain: 11.3dBi Peak F/B: 30.3dB Power Rating: 5kw+ SWR: Below 1.3:1 from 50.00MHz to 50.400MHz Stacking Distance: 5-8m (7m recommended) 2 Stacked Gain @ 7m spacing: 14.35dBi (free space) 2 Stacked F/B: 27.41dB 2 Stacked Gain @ 5.1m Spacing 15m above ground: 19.25dBi Boom Length: 4m. Weight: 6Kg / 13LB Turning Radius: 2.02m / 6.66ft Wind Loading: 0.22 Square Meters / 2.36 Square feet. Wind Survival: 160KPH/100MPH.
Not Yet Reviewed
$549.99