Availability
InnovAntennas HF Directional Antennas
InnovAntennas DXC-140 40 Meter Rotatable Dipole
InnovAntennas DXC-140 40 Meter Rotatable Dipole covers the entire 40-meter band with particularly good efficiency, impressive SWR bandwidth and a very reasonable wingspan, just over 39 ft. (12m). There are several methods to shorten a mast-mounted rotatable dipole, including loading coils and capacity hats. The position of the coils is critical to efficiency--closer to center is mechanically easier, further out is electrically better. The designer has used both methods to build the Delta C-140 antenna robustly and efficiently, limiting the size to a turning radius under 20 ft. (6 m) that many radio amateurs can easily mount on their tower mast and rotate within their property limits. The advantage of this design is a very large usable bandwidth of the antenna--the DXC-140 can be used over the entire internationally approved range from 7.0 to 7.3 MHz without having to use a tuner (SWR 2:1 or better). In the DXing range from 7.0 to 7.2 MHz, the SWR is usually equal to or better than 1.6:1, making the efficiency of the antenna 89 percent! Due to the robust construction of the DXC-140, no guy wires are necessary. Some of the images of this model installed show examples with guy wires, as chosen by individual user dependent upon the location, due to the expectation of snow and ice, for example. However, the mechanical design and construction will handle heavy loads, with the element diameter of 2.17 in. (55mm) in the center with a wall thickness of 0.078 in. (2mm). The element diameter decreases towards the end of the element save weight, but the ends still have a diameter of 0.98 in. (25mm) to easily support the capacity hats. All in all, the DXC-140 antenna combines a carefully calculated design with a very robust construction from an experienced antenna designer. This is also supported by the materials used: UV-resistant insulators, seawater-proof stainless steel hardware, and aircraft-grade aluminum elements. The result is a rotatable dipole with high efficiency, with an overall length of only 39.4 ft. (12 m) and a weight of only 18.7 lbs. (8.5 kg). The InnovAntennas DXC-140 40 Meter Rotatable Dipole is creating enthusiasm for many radio amateurs around the world. Order the DXC-140 for your station from DX Engineering.
( 1 )
$1,128.99
InnovAntennas DXR Series Multi-Band HF Beams
InnovAntennas DXR Series Multi-Band HF Beams have short booms with full-size elements or capacity-loaded shortened elements, all with excellent performance, making them very popular internationally. The DXR Series interlaced-element antennas, optimized by G0KSC over a long period of time, achieve the best possible balance between compact size and performance. For the DXR Series Multi-band Yagis, equal attention was paid to a very solid construction and sufficiently small component and packaging size, to keep shipping costs within reasonable limits. Click on any model listed for specific details and specifications. InnovAntennas DXR Series Multi-Band HF Beams are available exclusively from DX Engineering in North America. Important features of InnovAntennas DXR Series Multi-Band HF Beams: * No traps, matching links, or hairpins * Only one feed line for all bands * Careful selection of materials without regard to cost * Very robust construction with still manageable package size The DXR Series beams use a 1.97 x 1.97 in. (50 x 50 mm) square boom with 0.078 in. (2 mm) wall thickness. A square boom has the advantage that the elements cannot twist in the plane. On the other hand, it is slightly heavier than a round boom of the same stiffness. The DXR Yagis do not require any bracing of the boom. The longest elements are 1.378 in. (35 mm) diameter in the middle and taper relatively quickly to achieve a good compromise between weight and strength. This construction also helps to avoid constant vibration even in light winds. With these multi-band Yagis, care has been taken to ensure that there are never more than the elements of three bands nested within each other. This is because each additional element for one band can cause interference on another band. This negative effect was avoided by careful manual optimization. The result is the best possible matching over a wider band range than other antenna designs. In most cases, no tuner is necessary; the SWR minimum can be precisely set by adjusting the element lengths. Due to the robust construction and the absence of moving or electrically active components such as coils, traps, hairpins, etc., an InnovAntennas DXR beam is maintenance-free for many years. The insulators are UV-resistant and designed for a wide temperature range. The mounting hardware uses sea-water resistant stainless steel and the aluminum is type T6 6066/6082, which is also used in aviation. It is nice not to have to climb the mast every year to maintain the antenna. The DXR Series Multiband beams are designed to require only one feed line. This makes installation on a mast with a rotor very easy. And the use of modern SDR transceivers, which allow the observation of several bands at the same time, becomes really useful. The one feed line is connected directly to the solid distribution rails of the fed elements. By avoiding baluns, matching elements, traps, or hairpins for tuning, transmit power is only limited by the coaxial cable and connectors. Note: Front-to-back ratio (F/B) and SWR bandwidth data for the DXR Series will be added as it becomes available. Many models of the DXR Series are available as a "super-compact" version, on which the longest elements have been shortened with capacity hats, thus reducing their turning radius considerably. The installation of these impressive antennas is possible even where space is limited.
( 4 )
$1,439.99
—
$2,097.99
InnovAntennas DXC-240 2 Element Compact 40 Meter Yagi
InnovAntennas DXC-240 2-Element Compact 40 Meter Yagi features very good efficiency, a relatively small footprint and exceptional bandwidth. There are several methods to shorten a dipole or the elements of a beam, including loading coils and capacity hats. However, coils reduce efficiency if they are mounted too close to the middle of the Yagi and capacity hats can reduce the length by only a few percent. Through careful calculation and robust construction, InnovAntennas designer Justin Johnson, G0KSC, has managed to craft this two-element beam for 40 the meter band with a boom that is just under 23 ft. (7m) in length. The elements have a maximum length of 37.73 ft. (11.5m) and this beam achieves a 2:1 SWR bandwidth of 120 kHz without the use of an antenna tuner. The DXC-240 is a rugged, seriously heavy-duty 40 meter Yagi featuring a 2.362 in. (60mm) square boom with a wall thickness of 0.079 (2mm), making it very stable, even without truss ropes. The elements use 1.97 in. (50mm) diameter aluminum tubes in the middle, which quickly taper to 0.98 in (25mm) at the ends. The DXC-240 has a wind area of 13.5 sq. ft. (1.25 sq. m), weighs 110 lbs. (50 kg) and has a turning radius of 22.1 ft. (6.73 m). Solidly constructed, efficient loading coils are at the middle of each half element, exactly where they belong to minimize losses and maximize bandwidth! Additional efficient reduction of length is achieved with capacity hats at the ends of the elements. The result is a compact 2-Element Yagi for 40 m that can achieve gain of about 10.53 dBi at 65.6 ft. (20 m) above ground with a spec of 6.29 dBi free space gain and a typical front to back of 15 dB. Impedance matching with an adjustable hairpin that provides a 50 ohm feedpoint that does not negatively affect the usable bandwidth. Order the InnovAntennas DXC-240 2-Element Compact 40 Meter Yagi from DX Engineering. Enjoy an efficient and heavy-duty 40 meter 2-element beam that is so compact, it can be installed at many radio amateur's stations.
( 1 )
$2,160.00
InnovAntennas DXE12-6 Heavy Duty HF+6M Yagi
InnovAntennas "DXE Twelve-Six" is a heavy-duty 12 element multi-band HF plus Yagi that covers the 20, 17, 15, 12, 10 and 6 meter bands with a single coax connection to match modern HF+6m transceivers. Excellent performance on each band is achieved by direct feed and no traps, coils or hairpins for class-leading radiating efficiency. This ruggedly built beam antenna is ready for harsh weather environments with aerospace grade T6 6066/6082 aluminum tubing, UV and temperature protected insulators and all stainless steel hardware. The stout, modest length 17.5 ft. (5.33m) boom is made of 2 inch (50mm) square tubing and perfectly interleaved rigid fast-taper elements easily shed the wind. Choose this HF beam for long-term reliability and power handling that exceeds most coax specs. With low SWR across all six bands, 20 through 6 meters, InnovAntennas DXE 12-6 is a great value that packs a punch.
Not Yet Reviewed
$1,860.00
InnovAntennas 10M or 11M LFA-Q Loop-Fed Quad Beams
InnovAntennas 10M or 11M LFA-Q Loop-Fed Quad Beams from G0KSC represents significant development of LFA Yagis with a substantial difference: LFA-Q (Loop Fed Array Quad) Beams use top and bottom booms with through-boom LFA Yagi-style loops arranged vertically for every element. This very rugged design achieves better gain for a given length of boom and much lower noise for better signal quality compared to conventional Yagi antennas. InnovAntenna LFA-Q quad structure provides high directivity, eliminating unwanted spurious radiation. They achieve great side and rear rejection while retaining excellent gain, front-to-back and SWR bandwidth across the band. These are amazingly compact, high gain directional antennas, constructed to withstand serious weather conditions! Antennas of this series can be built and tuned to operate on a 500 kHz section of the 10 meter 28 MHz Amateur Band or on the 11 meter 27 MHz Citizens Band. The desired band is easily selected by changing the length of the outer element sections during construction – exact dimensions are provided in the instructions. The driven loop element feedpoint impedance is 50 ohms which allows a direct feed at high transmitting power. Vertical stacking of two or more antennas can significantly increase directivity, gain and signal quality; an interesting alternative when available space prevents the installation of long boom beam antennas. Just like other HF quads, LFA-Q vertical loop-fed quads are inherently quieter than a Yagi of the same size, making them a perfect choice for use in any location with high ambient noise level, such as a city or densely populated neighborhood. There is a 10M or 11M LFA-Q Loop-Fed Quad Beam version that matches your space, support, and wallet: - The 2-element economy version has loop spacing booms of only 2.3 ft. (70 cm); - The 3-element compact version booms are 10.5 ft. (3.2m) in length: - The 4-element performance model boom lengths are 26.9 ft. (8.2 m). Each LFA-Q is very stable mechanically, with mast clamps on each boom, top and bottom! Thanks to the use of high-quality materials, extensive modeling and testing, the durability and reliable performance of InnovAntennas 10M or 11M Loop-Fed Quad Beams is undeniable.
Not Yet Reviewed
$519.99
—
$1,419.99
InnovAntennas 13 Element HF Log Periodic Dipole Arrays
InnovAntennas 13 Element HF Log Periodic Dipole Arrays provide super wideband, high performance from 10 to 54 MHz. InnovAntennas LPDA's are designed using the very latest computer optimization techniques such as Dense Element Log Periodic Dipole Array (DELPA). This type of antenna was designed with specifications for a broadcasting center. Example photos display the DELPA-13 installed at the broadcast center. If you are looking for the best of the best from both a performance and mechanical construction perspective, then look no further than InnovAntennas LPDA! You have come to the right place! The DELPA-13 has 13 elements placed above the 37.73 ft. (11.5 m) by 3 in. (76mm) square boom, from which all elements are insulated. The feed point is 200 ohm and includes a 20 kW 4:1 balun. Feed line between the elements is silver plated hard-drawn copper wire spaced to produce a 300 ohm balanced-line feed. The DELPA-13 provides excellent, consistent results for the frequency range it covers with a relatively limited number of elements. Some of InnovAntennas HF Log Periodic Dipole Array mechanical design benefits include: * Marine grade stainless steel hardware (wherever possible) * Integrated feed line/boom for maximum efficiency, minimum wind-load * Silver plated balanced line feed * Mill finished for highest levels of accuracy and performance Performance specifications of InnovAntennas 13 Element HF Log Periodic Dipole Array DELPA-13: * Typical forward gain: 6dBi * Typical F/B: 15dB * Gain at 33 ft. (10 m) above ground: 10dBi * Power rating: 15 kw+ (further limited by feedline and connectors) * Feed impedance: 50 Ohm * Boom length: 37.73 ft. (11.5 m) * Weight: 165.35 lbs. (75 kg) * Turning radius: 20.67 ft. (6.3 m) * Wind loading: Upon application * Wind survival: 100 mph (160 kph)
Not Yet Reviewed
$4,100.00
InnovAntennas Moxon Directional Antennas
InnovAntennas Moxon Directional Antennas are mono-band, two element directional antennas with the ends bent toward each other. The gap between the elements is bridged by a non-conductive rod to give the antenna stability. The result is a directional antenna that is compact and of a relatively simple design, providing directionality and a very good front-to-back ratio. Available in versions for 10/11 Meters, 12 Meters, 15 Meters, 17 Meters, and 20 Meters, these compact antennas are a solution when you require directionality and don't have a lot of room. The InnovAntennas Moxon antennas are rated for up to 7,000 Watts and range from eleven pounds to twenty-two pounds in weight, meaning a small tower or mast will be sufficient to hold the antenna and not much in the way of a rotator will be needed. The InnovAntennas Moxon Directional Antennas require no balun and present a balanced 50-ohm load to the radio, connection of the coax to the antenna is carried out by way of screw terminals on the antenna. The Antenna is rated to survive in 99 Mph winds.
Not Yet Reviewed
$399.99
—
$783.99
InnovAntennas OP-DES Opposing Phase Driven Element System HF Yagis
InnovAntennas OP-DES Opposing Phase Driven Element System HF Yagis are a relatively new development by InnovAntennas. The ends of the driven element of these antennas are angled backwards, parallel to the boom. The opposing phase relationships in them achieves a very clean directional pattern with few side lobes. The resulting performance includes very good gain over a wide frequency range, along with a very good front-to-back ratio. These monoband beams antennas are available in a variety of boom lengths and element counts, to fit in with each operator's needs and their budget. Feature and Benefits of the InnovAntennas Monoband OP-DES Yagis: • Have bent driven elements to dramatically reduce side lobes and to help provide with constant performance characteristics • Super Wide Bandwidth - the broadest SWR, gain and f/b bandwidth of all our antennas, the OP-DES is best suited to HF applications where performance and a wide frequency range of low-SWR are needed in a single package. • High F/B ratio as with the LFA and OWL, the OP-DES Yagi has an exceptional Front to Back ratio for a direct-feed, 50Ω Yagi, which suppresses unwanted signals from behind your antenna! • Constant Impedance & 'All-Weather' Stability – Similar to the LFA and OWL, the OP-DES Yagi is able to maintain impedance in wet weather and therefore will not de-tune like other antennas can • 50-ohm Direct Feed - No Matching Loss - The OP-DES Yagi has been computer optimized with the 'bent' driven element in place to ensure a 50 ohm feed-point with no matching loss and minimal resistive loss • Class-Leading Direct Feed Yagi Performance - For a given boom length, the OP-DES Yagi provides superior all-round performance as compared to any other HF direct feed Yagi • Simple SWR Fine-Tuning Feature - No two locations for an antenna are the same. With this in mind the requirements of the perfectionist as well as the everyday user in our sights, the driven element of the OP-DES has adjustable end sections to allow for very simple SWR fine-tuning The most important part of your receiver - the antenna - has to be the best part. The antenna is considered the most important part of your station. After spending thousands on radio equipment, don't short-change the station by choosing anything less than the InnovAntennas OP-DES HF Yagi.
Not Yet Reviewed
$399.99
—
$1,400.00
InnovAntennas 10M and 6M Yagi Antennas
InnovAntennas 10M and 6M Yagi Antennas are a new series of gain-optimized two-band beams designed with the latest software. They feature a single coax feed system, ideal for modern transceivers with HF plus 6 meters. Different versions of these 28 and 50 MHz Yagi beams are available to suit every station and budget, depending upon boom length and element counts. Interlaced elements allow short and medium-length boom versions that are perfect for stations with limited space, simpler supports and smaller rotators, while the long boom versions satisfy the top enthusiasts. Dedicated to the bands where propagation changes quickly, InnovAntennas 10M and 6M Yagi Antennas offer excellent performance and rugged reliability, to take advantage of every opening.
( 1 )
$535.99
—
$1,066.00
InnovAntennas High HF Band Optimized Log Periodic Arrays
InnovAntennas High HF Band Optimized Log Periodic Arrays (BOLPA) are unique directional antennas that cover the high HF bands. Rather than sizing and distributing all elements to provide uniform performance everywhere, the BOLPA has been optimized to provide the highest performance within the Amateur Radio bands, resulting in exceptional performance across the entire covered bands. With a direct 50-ohm feed point, the overall front-to-back ratio and antenna gain is significantly improved compared to conventional 200-ohm LPDAs. Designer Justin Johnson, G0KSC, describes the BOLPA design in more detail in the "ARRL Antenna Book." If you want a high HF beam antenna that lasts and performs in all weather conditions, without SWR or bandwidth shifting, order one of the BOLPA listed here! BOLPA-4 The BOLPA-4 is brand new and offers the advantages of the BOLPA for those who have less space. The BOLPA-4 has a twin-boom length of 18 ft. (5.5 m) made of 1.25 in. square tubing, with only 4 elements, but fully covers the 15 meter band and the 24.8 – 30 MHz range, including the 12, 11 and 10 meters bands. Like all BOLPAs, the BOLPA-4 has a direct feed point impedance of 50 ohms and is a super heavy duty antenna that will survive wind speeds in excess of 100 mph (160km/h). SWR Sweep is 1.5:1 or under for the entire 9 MHz frequency range - No antenna tuner or matching is needed! BOLPA-3 The BOLPA-3 is manufactured on a much smaller boom and is therefore the logical choice for lightweight masts. The BOLPA-3 has an 11.5 ft. (3.5 m) twin-boom made of square 1.0 in, tubing and covers 24.8 MHz to 30 MHz without gaps, including the 12, 11 and 10 meters bands. So it is an excellent choice for those who want something for the upper HF bands for the current solar peak. SWR Sweep is well below 1.5:1 for the entire 6 MHz frequency range - No tuner or matching is needed! BOLPA-2 The BOLPA-2 is a very compact version of this antenna type with only a 7.9 ft. (2.4 m) boom and 2 elements. The BOLPA-2 covers the 11m and 10m band. Even on 12m the antenna can still be operated with a tuner and still has around 4.5 dBi on this band. If the space on the mast is limited, but 10m is a must, the BOLPA-2 is the right choice. SWR Sweep is 1.5:1 or under for the entire frequency range - No tuner or matching is needed!
Not Yet Reviewed
$489.99
—
$1,194.99
InnovAntennas 10 Element HF Band Optimized Log Periodic Antenna
InnovAntennas 10 Element HF Band Optimized Log Periodic Antenna is a super wideband, high performance beam that covers the frequency range of 14 to 30 MHz. The advantage of this antenna type is the extreme broadband performance with an even gain curve without dips. This makes this antenna suitable not only for amateur radio, but also for commercial services and for demanding SWLs. Through careful calculations and practical optimization, the spacing and lengths of the elements have been chosen to favor the amateur radio bands 20/17/15/12 and 10 meters, creating the Band Optimized Log Periodic Antenna, hence the name "BOLPA". Hundreds of hours optimizing both SWR and performance within the Amateur bands resulted in exceptional mono-band style performance for InnovAntennas BOLPA-10. This antenna provides a uniform gain of approximately 7 dBi over the entire frequency range and a front-to-back ratio over 20 dB on all but 12 meters with an SWR of mostly better than 1.5:1. The boom length of 25.3 ft. (7.7m) is relatively short for an antenna of this type. Since only one 50 ohm feed line is necessary, this broadband antenna is especially well suited for use with modern SDR transceivers that are able to receive on several HF bands simultaneously. This LPDA's double boom is made of 1.75 in. (44 mm) square aluminum, each supporting the alternately arranged elements and provides the support for the bracing in the middle. Both boom tubes serve as feed lines for high power operations on any band with no tuning adjustments necessary. A common mode choke or balun may be used. High quality aircraft grade aluminum, as well as stainless steel parts, means the BOLPA-10 is also designed for adverse weather and high wind speeds of up to 99 mph (160 kph). Some of InnovAntennas HF Log Periodic Dipole Array mechanical design benefits include: * Marine grade stainless steel hardware (wherever possible) * Integrated feed line/boom for maximum efficiency, minimum wind-load * Mill finished for highest levels of accuracy and performance * First-of-kind "Band Optimized" LPDAs by G0KSC InnovAntennas BOLPA-10 technical performance data: * Gain: 6.9 to 7.5 dBi (4.75 to 5.4 dBd) * Gain at 33 ft. (10m) above ground at 14.150 MHz: 11.56 dBi (including ground gain) * Typical F/B: Over 20 dB * Power rating: 5,000 watts (further limited by feedline and connectors) * Feed impedance: 50 ohm, stud connections * Boom length: 25.3 ft. (7.7 m) * Longest element: 42.6 ft. (13 m)
Not Yet Reviewed
$2,190.00
InnovAntennas 1712DUO 4-Element Yagi
InnovAntenna 1712DUO 4-Element Yagi is one of the latest designs from G0KSC. This very compact directional antenna for the 17 and 12m WARC bands (18 and 24 MHz) has no reflectors. One director per band and an LFA/dipole hybrid driver lies flat on its short, 5.1 ft. (1.56m) boom. This dual-band version has a second active element intentionally positioned for open-sleeve coupling with the hybrid driver. Consequently, this antenna requires only one feedline, avoiding potential interference and tuning issues caused by multiple feedlines. This short boom directional antenna design is a smart choice for the WARC bands. Since SWR bandwidth is not a requirement, optimization for excellent gain and good F/B on a short boom length is reached. This dual-band Yagi for 17 and 12m was calculated using advanced software and perfected by hand. Designer Justin, G0KSC, has achieved particularly good electrical properties and robustness to provide reliable performance, even in adverse weather conditions.
Not Yet Reviewed
$829.99