Availability
InnovAntennas
InnovAntennas is a U.K.-based company that has pioneered new modeling and optimization technology for the development of specialized high performance HF, VHF and UHF...
InnovAntennas is a U.K.-based company that has pioneered new modeling and optimization technology for the development of specialized high performance HF, VHF and UHF Yagi-style antennas for commercial and amateur markets. The company's unrelenting application of the latest 64 bit commercial-grade Numerical Electromagnetic Calculation engines and advanced Particle Swarm Optimizations to their cutting edge, low-noise designs has achieved the production of unparalleled antennas. InnovAntennas let you hear weak signals better than any other antennas of the same boom size. Their antennas are simultaneously engineered for the...
InnovAntennas is a U.K.-based company that has pioneered new modeling and optimization technology for the development of specialized high performance HF, VHF and UHF Yagi-style antennas for commercial and amateur markets. The company's unrelenting application of the latest 64 bit commercial-grade Numerical Electromagnetic Calculation engines and advanced Particle Swarm Optimizations to their cutting edge, low-noise designs has achieved the production of unparalleled antennas. InnovAntennas let you hear weak signals better than any other antennas of the same boom size. Their antennas are simultaneously engineered for the best mechanical and electrical characteristics, so you are assured of long-term performance in all aspects of your installation. Your receiver is only as good as the antennas employed, so look no further than InnovAntennas for the absolute best. DX Engineering is proud to be the exclusive North American distributor of InnovAntennas.
InnovAntennas 162 MHz AIS LFA Yagis
InnovAntennas 162 MHz AIS LFA Yagis are vertically polarized Loop Fed Array (LFA) beam antennas designed specifically for 161.5 – 162.5 MHz range, featuring simplified installation with integral rear-mount mast brackets. Three models are offered, each performance optimized with extensive computer modeling. High quality materials are used in manufacturing, ensuring durability and high reliability. LFA Yagis inherently receive less ambient noise and are virtually impervious to the detuning effects of rain and ice that render non-loop antennas unusable. Adverse weather conditions and wind speeds of over 124 mph (200 km/h) are no problem for LFA Yagis. They feature a 50-ohm impedance, low-loss type N female connector. LFA antennas handle a maximum transmitter power of 5 kW. AIS is the maritime Automatic Identification System, a radio-based transponder system that automatically tracks and identifies ships at sea by broadcasting their position, speed, course, and other data. Its purpose is to prevent collisions, assist in search and rescue operations, and help vessel traffic services (VTS) monitor traffic. InnovAntennas 162 MHz AIS LFA Yagis are specially designed for professional use at coastal radio stations, for use with AIS repeaters and for suppliers of AIS systems. Of course, they are also ideal for anyone who would like to enter the exciting and fascinating world of AIS reception or take their existing equipment to the next level. Due to their frequency coverage, InnovAntennas 162 MHZ AIS LFA Yagis are also ideal for long range directional reception of the National Weather Service (NWS) NOAA Weather Radio transmitters broadcasting on 162.400 through 162.550 MHz.
Not Yet Reviewed
$305.99
—
$421.99
InnovAntennas 10 Element HF Band Optimized Log Periodic Antenna
InnovAntennas 10 Element HF Band Optimized Log Periodic Antenna is a super wideband, high performance beam that covers the frequency range of 14 to 30 MHz. The advantage of this antenna type is the extreme broadband performance with an even gain curve without dips. This makes this antenna suitable not only for amateur radio, but also for commercial services and for demanding SWLs. Through careful calculations and practical optimization, the spacing and lengths of the elements have been chosen to favor the amateur radio bands 20/17/15/12 and 10 meters, creating the Band Optimized Log Periodic Antenna, hence the name "BOLPA". Hundreds of hours optimizing both SWR and performance within the Amateur bands resulted in exceptional mono-band style performance for InnovAntennas BOLPA-10. This antenna provides a uniform gain of approximately 7 dBi over the entire frequency range and a front-to-back ratio over 20 dB on all but 12 meters with an SWR of mostly better than 1.5:1. The boom length of 25.3 ft. (7.7m) is relatively short for an antenna of this type. Since only one 50 ohm feed line is necessary, this broadband antenna is especially well suited for use with modern SDR transceivers that are able to receive on several HF bands simultaneously. This LPDA's double boom is made of 1.75 in. (44 mm) square aluminum, each supporting the alternately arranged elements and provides the support for the bracing in the middle. Both boom tubes serve as feed lines for high power operations on any band with no tuning adjustments necessary. A common mode choke or balun may be used. High quality aircraft grade aluminum, as well as stainless steel parts, means the BOLPA-10 is also designed for adverse weather and high wind speeds of up to 99 mph (160 kph). Some of InnovAntennas HF Log Periodic Dipole Array mechanical design benefits include: * Marine grade stainless steel hardware (wherever possible) * Integrated feed line/boom for maximum efficiency, minimum wind-load * Mill finished for highest levels of accuracy and performance * First-of-kind "Band Optimized" LPDAs by G0KSC InnovAntennas BOLPA-10 technical performance data: * Gain: 6.9 to 7.5 dBi (4.75 to 5.4 dBd) * Gain at 33 ft. (10m) above ground at 14.150 MHz: 11.56 dBi (including ground gain) * Typical F/B: Over 20 dB * Power rating: 5,000 watts (further limited by feedline and connectors) * Feed impedance: 50 ohm, stud connections * Boom length: 25.3 ft. (7.7 m) * Longest element: 42.6 ft. (13 m)
Not Yet Reviewed
$2,190.00
InnovAntennas 144 MHz OWL Ultra Yagi Antennas
InnovAntennas 144 MHz OWL Ultra Yagi Antennas offer the 2 meter weak-signal enthusiast undeniable low-noise performance with amazing SWR bandwidth, particularly good gain and an excellent front-to-back ratio. Five Optimized Wideband Low-impedance (OWL) Ultra Yagi antennas are available, starting with six element up through ten element models. InnovAntennas' OWL Ultra Yagi beams have been extensively numerically simulated and optimized using special software that includes a 3D simulation of the boom, the insulators, the connector and the cable; an elaborate numerical simulation of these antennas that was inconceivable a decade before. InnovAntenna has achieved the best of what is technically possible for a wideband 2 meter Yagi. The boom of the 144 MHz OWL Ultra Yagi is 1 in. (25mm) square aluminum featuring through-the-boom insulated elements. The adjustable center fed folded dipole has the side opposite the 50 ohm feedpoint connected to the boom, which removes static charge to protect the transceiver. This antenna acts like a band-pass and noise filter outside the 2 meter band, due to rapidly rising impedance. However, the most important feature of OWL Ultra Yagi antenna is optimization for reduced side lobe in the elevation plane, achieving dramatically reduced received noise, even in high ambient noise city locations. The InnovAntennas OWL Ultra Yagis are suitable for all "weak signal modes" on the low end of the 2 meter band due to the optimization for high gain with incredibly low noise for EME, Meteor Scatter, Tropo-DX, Sporadic-E, etc. Despite the robust construction (the antennas can withstand wind speeds of up to 100 mph (160 km/h), the Yagis are still relatively light and thus suitable for smaller masts or for stacking several antennas. The OWL Ultra Yagis do not include a balun, as the coaxial cable connects directly to the loop driven element dipole. The antenna can handle 5 kW, but the recommended choke balun handles a maximum power of approx. 1.0 to 1.5 kW is possible. Exceptionally good SWR is achieved over a wide frequency range. With excellent gain to noise ratios (G/T ratio), the economical InnovAntennas OWL Ultra Yagis are well suited for use in stacked arrays, for EME, satellite or terrestrial operations. Each model listing describes the key benefits of the OWL Ultra Yagi Antennas. Your antenna is a part of your receiver and arguably the most important part of your station. You have spent thousands on radio equipment; make sure you don't short-change your set-up by choosing anything other than an InnovAntennas OWL Ultra Yagi.
Not Yet Reviewed
$274.99
—
$469.99
InnovAntennas Ferrite Bead Baluns
InnovAntennas Ferrite Bead Baluns are fully assembled and ready to install, to achieve the absolute best performance from an InnovAntennas Yagi or other balanced terminal antennas. In contrast to wound baluns, ferrite bead choke baluns have the advantage of covering a wide frequency range for multiple bands. As required for most Yagi antennas from InnovAntennas with 50 ohm direct feed, ring terminals are installed on one end for the studded feedpoint connection. The other end is terminated in either Type-N or SO-239/UHF Female for the appropriate band coverage and impedance. Heat shrink filled with a UV-resistant adhesive provides a waterproof cover over the ferrite beads on the cable and the connector. Why do I need a Balun on my Yagi? Ferrite Bead Baluns offered by InnovAntennas provide very important functions of a balun, which is not well understood. For proper antenna performance, a ferrite bead balun inhibits common-mode current two important ways; A) it prevents RF flow on the outside the coax shield cable when transmitting, and B) it prevents stray RF noise picked up by the coax cable shield from entering the antenna system and affecting the receiver. What happens on the antenna without a RF choke balun? Several problems can occur. When an unbalanced feedline is connected directly to a balanced antenna with no BALUN in place, common-mode currents will run on the outside of the coaxial cable shield. The Yagi feedpoint is forced out of balance causing a skew and diminished beam antenna pattern and gain. A loss of Front-to-Back ratio (F/B) can occur, as well as detuning that affects antenna frequency, potentially causing increased SWR. In addition to the pattern distorting performance drop, radiation from the antenna feedline can cause interference to home and business electronics. The other very important benefit of using a wideband ferrite bead balun is to reduce received noise in certain situations. While the noise produced by many household products is normally at very low levels, sensitive ham radio receivers can be affected, which can prevents weak signals being heard. RF noise picked up on the coax cable shield will enter the antenna system feedpoint when no ferrite bead choke balun is installed at the feedpoint.
( 3 )
$119.99