Selected Filters


Availability


7 Results Found For "Choke"

Part Groups

Results 1 - 7 of 7

Momobeam RFC-DU 5kW RF Choke Baluns

Momobeam RFC-DU 5kW RF Choke Baluns provide an excellent balance of currents and ensure a proper transition between balanced resonant antenna systems (with low SWR)—such as dipoles and Yagi antennas—and unbalanced coaxial feedlines. These RF Chokes are highly effective at suppressing common mode current from flowing along the exterior of coaxial feedlines, a condition that can cause several issues, including: - Increased noise levels - Inaccurate SWR meter readings - Interference affecting electronic devices within our shack or near the antenna system

Not Yet Reviewed

$265.99

Momobeam RFC-DU 10kW RF Choke Baluns

Momobeam RFC DU 10kW RF Choke Baluns provide an excellent balance of currents and ensure a proper transition between balanced resonant antenna systems (with low SWR)—such as dipoles and Yagi antennas—and unbalanced coaxial feedlines. These RF Current Chokes are highly effective at suppressing common mode current from flowing along the exterior of coaxial feedlines, a condition that can cause several issues, including:

Not Yet Reviewed

$361.99

Momobeam RFC-TC-5kW RF Choke Baluns

Momobeam RFC-TC-5kW RF Choke Baluns are broadband common-mode current (CMC) chokes designed for operation from 3 to 50 MHz. They provide current balance between balanced resonant antennas and unbalanced coaxial feed lines, helping prevent common-mode current from flowing on the outside of the coaxial cable. Applications include 50-Ohm Yagi antennas, resonant dipoles, and replacement of damaged 1:1 current baluns or RF chokes. The RFC-TC-5kW RF choke balun is constructed using high-quality Teflon-insulated coaxial cable wound on three 2.4-inch toroidal cores and housed in a UV-resistant IP65-rated enclosure. Key Features • Function: Suppresses common-mode current (CMC) on coaxial feed lines • Noise Reduction: Helps reduce received noise levels • SWR Accuracy: Helps prevent incorrect SWR meter readings • Interference Mitigation: Helps reduce RF interference to nearby electronic devices • Recommended Applications: 50-Ohm Yagi antennas, resonant dipoles, and replacement of damaged 1:1 baluns or RF chokes Additional Features & Specifications: • Frequency Range: 3-50 MHz • Impedance Ratio: 50 Ω (1:1) • Common-Mode Rejection: 30 to 50 dB • Maximum Applicable Power: 5 kW PEP (50 Ω resonant load, SWR 1:1) • Core Configuration: Triple 2.4 in toroidal cores • Cable Type: High-quality Teflon-insulated coaxial cable • Enclosure Material: UV-resistant ABS • Environmental Rating: IP65 • Connector Configuration: 1 × SO-239, 2 × stainless-steel threaded terminals • Weight: 2.0 lbs. (0.9kg) excluding packaging • Manual Language: English

Not Yet Reviewed

$255.99

Momobeam RFC-PC 6kW RF Choke Baluns

Momobeam RFC-PC 6kW RF Choke Baluns are efficient broadband common mode current chokes designed to ensure proper current balance and clean transitions between balanced resonant antennas—such as dipoles and Yagi antennas—and unbalanced coaxial feed lines. By delivering excellent suppression of unwanted common mode current across a wide frequency range, these RF chokes help maintain optimal antenna performance and protect sensitive station equipment. Common mode currents can cause a variety of station problems, including elevated receiver noise levels, inaccurate SWR measurements, and interference affecting nearby electronic devices or equipment within the shack. The RFC-PC 6kW effectively prevents these issues by stopping common mode current from traveling on the outside of the coaxial shield, ensuring cleaner transmit and receive performance under all operating conditions. Thanks to its broadband characteristics, the RFC-PC 6kW can be used with virtually any 50 ohm feed antenna system. It is ideal for Yagi antennas, resonant dipoles, and any installation where clean feedline behavior is essential. The choke also serves as an excellent replacement for damaged or aging 1:1 RF chokes or baluns, offering improved suppression and modern build quality. With robust performance, wide compatibility, and reliable common mode current elimination, the Momobeam RFC-PC 6kW RF Choke Baluns provides a simple yet essential upgrade for ensuring your antenna system operates at its best.

Not Yet Reviewed

$434.99

Momobeam RFC-LI-5kW-TC Line Isolator RF Current Baluns

Momobeam RFC-LI-5kW-TC Line Isolator RF Current Baluns are a broadband 1:1 line isolator and common-mode current (CMC) choke designed for operation from 3 to 50 MHz. Installed directly in a 50 Ω coaxial feed line, it suppresses common-mode current on the outside of the coax shield and helps maintain proper current balance between balanced antennas and unbalanced feed systems. The line isolator can be installed at the antenna feed point, at the base of a tower, near the radio station, or along feed lines used with End Fed antennas. Construction consists of high-quality Teflon-insulated coaxial cable wound on three 2.4-inch toroidal cores and housed in a UV-resistant IP65-rated ABS enclosure. Benefits: • Function: Suppresses common-mode current on coaxial feed lines • Installation Locations: Antenna feed point, tower base, near the shack, or inline with the feed system • Feedline Application: Suitable for use as a feedline choke on coaxial cable runs • End Fed Compatibility: Can be used with End Fed antenna feed lines • Noise Reduction: Helps reduce receiver noise caused by feedline current • SWR Accuracy: Helps prevent inaccurate SWR meter readings • Interference Mitigation: Helps reduce RF interference to nearby electronic equipment • Construction: Triple-core design using Teflon-insulated coaxial cable wound on 2.4-inch toroidal cores Additional Features & Specifications: • Frequency Range: 3-50 MHz • Impedance Ratio: 50-Ohm to 50-Ohm (1:1) • Common-Mode Rejection: 30 to 50 dB • Maximum Applicable Power: 5 kW PEP (50 Ω resonant load, SWR 1:1) • Core Configuration: Triple 2.4 in toroidal cores • Cable Type: High-quality Teflon-insulated coaxial cable • Enclosure Material: UV-resistant ABS • Environmental Rating: IP65 • Connector Configuration: (2) UHF SO-239 female • Weight: 2.0 lbs. (0.9kg) excluding packaging • Manual Language: English

Not Yet Reviewed

$255.99

Momobeam Mono3-10 Three Element 10M Yagi Antennas

Momobeam Mono3-10 Three Element 10M Yagi Antennas are engineered using the latest generation design software to deliver exceptional performance across the entire 10 meter band. With full size elements and precision optimized geometry, these antennas are ideal for operators who want maximum efficiency, gain, and on air reliability without compromise. Built on a robust square boom, the MONO3 10 is designed for easy, accurate assembly. Each system includes an assembly tool, spare hardware (bolts and aluminum tubing), and fully labeled components. All hardware is packaged in clearly marked bags, and every aluminum tube is labeled to ensure a fast, frustration free installation experience. These antennas are suitable for both mast mounting and side mount tower configurations, offering excellent flexibility for station design. A medium duty rotor is required for proper operation. To further enhance performance and reduce feedline issues, every MONO3 10 comes standard with a 3 kW RF choke balun—a premium component that many manufacturers offer only as an upgrade. Momobeam RF Chokes are constructed from high quality, low loss, double shielded coaxial cable with a Teflon dielectric, combined with carefully selected ferrite material sleeved over the cable to create a high impedance path for RF, providing excellent isolation between the antenna and the coaxial feedline. Mono3-10 Features and Specifications: RF Choke Balun: 3kW included Band Coverage: 10-meters Frequency Range: 27 – 28.8 MHz Bandwidth@ S.W.R. ≤ 1.5:1: 1800 kHz Longest element: 9.4 ft. (287cm) Power Handling: 10kW Wind Area: 2.7 sq. ft. (0.25m²) Wind Load: (80 MPH): (500N) 112.4 lbf. Wind Survival*: 100 Mph (160 Km/h) Tower Leg/Mast Diameter: 2.0-2.36in. (50/60mm) Tower Lift Side: 1.25ft. (40cm) above the tower top Weight: 22 lbs. (10kg) Feedline Connector: (1) 50-Ohm UHF SO-239 female Tubes and Plates: Aluminum alloy 6061T6 Hardware: Stainless steel Insulating Clamps: Polypropylene, UV resistant

Not Yet Reviewed

$437.99

Momobeam Mono4-6 Monoband Yagi Antennas

Momobeam Mono4 6 Monoband Yagi Antennas are purpose built for the 6-meter magic band of 50MHz and optimized for DX operators who demand high performance in a lightweight, field ready design—perfect for SOTA, POTA, and other portable VHF activities. Weighing only 8.82lbs., these antennas deliver impressive gain, strong front to back performance, and a remarkably flat SWR curve of less than 1.5:1 across the entire 6 meter band. Despite their compact profile, they provide the reliable on air results expected from a full featured Yagi. Assembly is simple and intuitive. Built on a durable round boom, each antenna includes all hardware packed in clearly labeled bags, and every aluminum tube is individually marked to ensure a quick and effortless setup—whether in the field or at home. Requiring only a light duty rotator, the Mono4 6 is an excellent choice for portable masts, lightweight towers, or temporary installations where performance and convenience both matter.

Not Yet Reviewed

$327.99

  • 1
  • Page 1 of 1