Filters
Paradan Radio DC Power
Paradan Radio Power Strip 6
Neaten up your station with the Paradan Radio Power Strip 6 metered DC distribution panel. It is ideal in your shack and is especially useful in the mobile or a go-box. Housed in a sturdy metal case, this DC power panel is RF filtered and the input is fused to 40A. The horizontal design permits easy connections of power cables to the six bottom-mount Anderson Powerpole outputs. Anderson locking clips may be used to secure the connections. Bright 3-digit, 7-segment LEDs accurately display the DC voltage in red and total current in Amperes in blue. DC current is measured on the negative lead, so the chassis of the strip is isolated from the negative lead. Seven pairs of Powerpoles are included. Paradan Radio Power Strip 6 Specifications: Voltage: 5 to 30 Volts DC Current: 40 Amperes total Meter: 7-segment Red LED for Voltage, 7-segment Blue LED for current Meter Accuracy: Voltage: + 1 %, 0.1 volt, Current: + 3%, Residual <0.2 Amp Current Sense Resistor: 5 milliohms Fuses: 40A ATC included; use any rating ATC fuses as needed Connectors: Anderson Powerpoles Enclosure: Black painted aluminum Dimensions: 7.1 x 2.2 x 1.0 inches; Powerpoles protrude 0.6 inches Mounting Holes: #6 hardware Mounting Centers: 6.7 x 1.4 inches Weight: 7.5 oz., 190 g
( 23 )
$120.00
Paradan Radio Power Strip 8 DC Distribution Panels
Paradan Radio Power Strip 8 DC Distribution Panels allow you to tidy up your station, and power up all your 12-volt equipment. These rugged, high-capacity metered distribution panels feature one 40A fused Anderson Powerpole® input socket and eight fused Powerpole® output sockets, allowing for easy fan-out in a horizontal layout. A bright 3-digit 7-segment LED display shows DC Voltage in red and total current in blue, measured accurately via a 3.3 milliohm resistor in series with the positive lead—not the negative lead like most meters—ensuring precise readings even in common-ground setups like vehicle-mounted radios. The chassis is isolated from the negative connection to prevent ground loop issues.
Not Yet Reviewed
$200.00
Paradan Radio DC Gate 40+
Paradan Radio DC Gate 40+ is a 13.8 volt battery back-up system for powering your radio station, "go box", or RV. It can output up to 40 amperes from either the power supply or the battery. The radio, or other equipment connects to the or-gate output. One input comes from the power supply, the other input is connected to a 12 volt battery. The higher voltage of the power supply passes through to the output. But when AC power is lost and the power supply goes dead, the gate switches to the battery, instantaneously. When the power comes back on again, the gate switches back to the power supply, and the built in 2 ampere constant current charger rapidly restores the battery to full charge. Ideal for use with Bioenno Lithium-Ferrous-Phosphate batteries as well as sealed lead-acid batteries. The DC 40+ is solidly made on a heatsink and connections are Powerpoles. Specifications - Paradan Radio DC Gate 40 + • Power Supply Voltage: 13.8 - 14.2 volts for Lead Acid Batteries, "12 volt" GEL, or AGM type, any amp-hour rating, 14 -14.8 volts for Bioenno Lithium-Iron-Phosphate Batteries • Current: 40 amperes maximum • Connectors: Anderson Powerpoles • Diodes: Two 80 Amp Schottky, IRF 80CPQ030 • Diode Drop: 0.3 volts @10 Amps • Charger Output: 2 Amperes constant until near full charge • Charger: IRF-5210 FET, Comparator bridge, 0.1 ohm sense resistor Schottky diode • Size: 5.25 x 2.75 x 1.0 in., Powerpoles protrude 0.5 in. • Weight: 9.5 oz.
( 5 )
$120.00