Availability
ROHN Parts and Accessories
ROHN 25G Tower Sections
ROHN 25G Tower Sections are the world standard in galvanized steel tower. ROHN towers use double-bolted joints, which have been proven to be the best method of joining tower sections, for sturdiness and dependability. As a guyed structure, the standard 25G designs may rise to a height of 190 ft. ROHN 25G Tower Sections include the standard straight sections that are 10 ft. in length. Also, special short sections are available in various lengths to suit your tower base or shipment needs. 25G Tower Sections are offered in several different top section configurations to accommodate various mast sizes and antenna mounting or rotating requirements. ROHN 25G Tower Sections feature: * Complete hot dip-galvanizing after fabrication * 11 1/4 in. equilateral triangle design * High-strength tubular legs are joined by continuous, solid round steel bracing cross members * Each straight and top section shipped with all required nuts and bolts for mounting that section, supplied inside one of the section legs. ROHN 25G Tower Sections are available directly from DX Engineering at competitive shipping rates. The more you order, the better the deal! Order your ROHN Tower Sections and other tower installation accessories from DX Engineering today!
( 21 )
$199.99
ROHN Tower Work Platforms
ROHN Tower Work Platforms are essential for working long periods on the tower. They simply snap into place on ROHN G Series Towers. They are easily positioned and repositioned at any level, since no mounting bolts are required. Save your feet and legs from the pain of standing on the skinny cross bracing. ROHN Work Platforms (ROH-WP25G / WP45G / WP55G ) have been designed to meet the TIA 250 lbs. load requirement. This includes the weight of the safety equipment harness, lanyard and tools on your tool belt. Anything over that would require a review by a local engineer. Get your ROHN Tower Work Platforms from DX Engineering today!
( 9 )
$249.99
ROHN Tripod Roof Towers
ROHN tripod roof towers or TRTs feature a universal mast clamp that is capable of mounting masts with up to 1 3/4 in. diameters and swivel feet that adjust to the pitch of almost any roof. Installation is simple and fast with lag screws or bolts (not included) through the feet that securely anchor the towers for long, trouble-free service. ROHN tripod roof towers feature a lower mast support bracket and hot-dip galvanized construction for corrosion protection.
( 25 )
$129.99
—
$159.99
ROHN Mast Wall Mounts
ROHN Mast Wall Mounts can be used on masonry, wood, metal, and other types of walls using up to 1/4 in. diameter lag screws or bolts. These mounts employ rugged steel brackets for extra support and rigidity. ROHN wall mounts are versatile, with the available standoff distances allowing for clearance on most structures. Their mast clamps accept a large range of masts--from 7/8 in. to 2 3/4 in. outside diameter! Available in single or double bracket designs, these brackets offer maximum mast support. Masts are held in place, within the brackets, with a unique "Anti-Twist" locking clamp that prevents undesirable mast rotation. Galvanized for durability, these ROHN Mast Wall Mounts are designed to give many, many years of service. Contact DX Engineering for your own ROHN Mast Wall Mounts... today!
( 66 )
$103.99
—
$107.99
ROHN BPC25G Concrete Base Plates
These ROHN BPC25G Concrete Base Plates provide an easy and secure way to mount your guyed or bracketed ROHN 25G tower to a concrete pier, without the need for embedding a tower section in concrete. With these base plates, only a single 3/4 x 12 in. Pier Pin embedded in the standard concrete base is required to anchor the base of a ROHN 25G Series guyed tower. This is possible since lateral forces are minimized at the base of the tower. A slight pivoting of the pier pin anchored tower base is natural and allowable, as virtually all of the guyed tower forces are exerted vertically onto the concrete pier. BPC25G Concrete Base Plates are completely hot-dip galvanized after fabrication and are designed to work only with Rohn 25G Series straight tower sections. Setting the standard in towers for decades, Rohn has supported more ham antennas than any other brand. Start your tower build with one of these BPC25G Concrete Base Plates from DX Engineering!
( 6 )
$129.99
ROHN Pier Pin Tower Base Plates
ROHN pier pin tower base plates allow you to mount your 45G or 55G-series tower using 3/4 in. x 12 in. pier pins embedded in concrete. ROHN pier pin base plates cannot be used in self-supporting applications--they must be used for bracketed or guyed installations only. Be confident in your tower installation with ROHN concrete base plates.
Not Yet Reviewed
$219.99
ROHN 25G Tower Short Bases
ROHN 25G Tower Short Bases are designed to be embedded directly in concrete as the base section for a tower installation. They are set into a hole, and then concrete is poured around them. These ROHN 25G Tower Short Bases feature an 11.250 in. on center equilateral triangular design, and are constructed of extra heavy duty 1.25 in. OD steel tubing side rails with continuous solid steel rod bracing.
( 9 )
$181.99
ROHN Tower Adjustable House Brackets
ROHN Tower Adjustable House Brackets include the standard duty models for wall and eave bracing of 25G series towers that are installed as self-supporting or guyed. As with all ROHN tower accessories, these bracket models are all galvanized. ROHN Tower Adjustable House Brackets are completely adjustable, from 0 in. up to 36 in. offset depending on model, to handle most house wall bracketing installation of 25G tower where there is an overhanging eave to be cleared. These models HB25AG, HB25BG, and HB25CG are intended for use for a guyed or self-supporting ROHN 25G tower installations. Even for 25G towers that are installed with a sufficient base and design to be self-supporting, many municipalities require towers that are mounted next to a house to be bracketed to the house. ROHN Tower Adjustable House Brackets provide sufficient adjustments for virtually every tower house bracketing situation. The Universal Eave Bracket, model EB2525G, offers hinged connections which allow the tower leg clamps to remain perpendicular to the ground while bolt down supports rotate to lay flat along the pitched roof or under the pitched eave. These ROHN Tower Adjustable House Brackets are for self-supporting or guyed installations only and are not intended for bracketed only tower installations. For "Bracketed Tower" installations of ROHN 25G that are only bracketed and which are not self-supporting and will not be guyed, use the ROHN Heavy Duty Universal House Bracket model HBUTVRO.
( 11 )
$159.99
—
$249.99
ROHN Telescoping Masts
ROHN Telescoping Masts are available in a variety of heights to suit your specific application. They are manufactured from steel and then galvanized for corrosion protection and come assembled with mounting hardware. All telescoping mast installations must be guyed or bracketed (sold separately) and should be performed by experienced or licensed installers. NOTE: Unless specifically listed as otherwise, these masts are over-weight and over-length for our standard UPS or FedEx free shipping. Freight charges may apply. When you need antenna supports, ROHN Telescoping Masts, from DX Engineering, are the time-tested solution!
( 93 )
$147.99
—
$207.99
ROHN 45G Tower Short Bases
ROHN 45G tower short bases are designed to be embedded directly in the concrete as the base section for a 45G tower installation. They are set into a hole and then have concrete poured around them to provide a bolted connection to the 45G main tower section. The 45G tower short bases uses double bolted joints which are proven to be the best method of joining tower sections for sturdiness and dependability. The ROHN 45G tower short bases feature a 16.750 in. equilateral triangular design, and are constructed of extra heavy duty 1 ¼ in. steel tubing side rails with continuous solid steel rod bracing.
Not Yet Reviewed
$193.99
ROHN Telescopic Mast Roof Mounts
ROHN Telescopic Mast Roof Mounts are completely assembled for a quick and easy flat or peaked roof-mount installation. These mounts are sized for antenna masts up to 2.25 inches in diameter. These mounts allow tall masts to be swung up or down along the ridge of the roof. The bottom of the mast inserts into the hinged base and is secured by set screws. This feature permits the user quick and safe access antennas for servicing or replacement. When combined with a guy-wire system or other stabilizing attachments, these ROHN Telescopic Mast Roof Mounts supply the base-support and convenience that your antenna installation needs. Use them to secure the bottom of your mast to decks, flat roofs, peaked roofs, concrete pads, or just about anything! Fixed or telescopic masts are an inexpensive solution to raising antennas! These ROHN Telescopic Mast Roof Mounts, from DX Engineering, are the perfect answer for mast-base support!
( 1 )
$155.99
ROHN JRM Series Roof Pads
For added protection of your flat roof, ROHN JRM Series Roof Pads rest beneath your ROHN JRM Series roof mounts. These durable rubber pads provide an optional protective layer between the roof's surface and the roof mount. Simply select your location and install them before beginning the roof mount installation. These durable 1/4 in. thick JRMPAD protective mats ship as a set of three smaller pads for ease of handling. They form a fitted cushion when set up, sized specifically for the ROHN JRM Series mounts. If you have any worries that a JRM Series non-penetrating roof mount might tear or gouge your expensive roofing material, then ROHN JRM Series Roof Pads from DX Engineering provide for a worry free installation.
Not Yet Reviewed
$177.99
ROHN Turnbuckles
ROHN Turnbuckles are constructed with a steel sleeve surrounding internal steel screws used to pull anchor points closer together by turning the turnbuckle body. They are ideally suited for tensioning mast or tower guy lines. These turnbuckles are galvanized for weather resistance and long life. Working load for these turnbuckles starts at 1,200 lbs. and then goes up. Break strength, also known as ultimate strength, is 6,000 lbs. and up. If you are raising a new mast or tower, or just performing maintenance on your existing installation, these ROHN Turnbuckles from DX Engineering will take the strain, year after year after year!
Not Yet Reviewed
$116.99
ROHN APL25G Tower Top Plates
ROHN APL25G Tower Top Plates are designed to bolt on top of a standard 25G section to provide a small platform for the installation of equipment. They are manufactured from quality, durable materials and have a square, pre-drilled bolt pattern typically used to mount beacon lights or lightning rods. These galvanized plates are the perfect cap for your ROHN tower when you are not using a tapered top, bearing plate, or other topping hardware. Contact DX Engineering for your ROHN APL25G Tower Top Plates!
Not Yet Reviewed
$229.99